Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

7018 Welding Rod Specs: Sizes and Specifications

7018 welding rod specs cover diameter, length, pack weight and current range: the listed rods compared, from a 3/32 inch 1 lb pack to a 1/8 inch 10 lb pack.

7018 Welding Rod Specs: Sizes and Specifications
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Victory Welding Alloys 7018 Welding Rod 1/8" E7018Victory Welding Alloys 7018 Welding Rod 1/8" E70189.5/10View on Amazon
  2. 2ATLASWELDER 7018 Welding Rod 1/8" 10LBATLASWELDER 7018 Welding Rod 1/8" 10LB9.5/10View on Amazon
  3. 3WISUNO Welding Rods,E7018 3/32’’ 1LB,Carbon SteelWISUNO Welding Rods,E7018 3/32’’ 1LB,Carbon Steel9.5/10View on Amazon
  4. 47018 welding rod 3/32", 3LB Low-Hydrogen Welding7018 welding rod 3/32", 3LB Low-Hydrogen Welding9.5/10View on Amazon

A bead that cracks on cooling, a joint that needs a repeat pass, a frame that has to hold: the rod on the bench decides how much of that comes back. 7018 welding rod specs answer the question before the arc starts, because the diameter, the length and the pack on the listing set what the rod can do and how far it goes. This guide reads the listed rods side by side, from a small pack for thin work to a heavy pack for structural steel, and shows how to match the specs to the joint in front of you.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Victory Welding Alloys 7018 Welding Rod 1/8" E7018

Victory Welding Alloys 7018 Welding Rod 1/8" E7018

STARTECHWELD9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1/8 inch low-hydrogen rod in a 5 lb box with a stated impact value for cold work.

Pros

  • States 78 ft-lbs at -20°F, the only impact value in this guide
  • Low-hydrogen iron powder coating with a quiet, steady arc and low spatter
  • All-position electrode for carbon steel, high-tensile steel and low alloy steel
  • Easily removable slag and a finely rippled bead, per the listing

Cons

  • No current range is stated for the 1/8 inch diameter
  • No warranty term is stated
  • Sold as a 5 lb box only, with no other pack weight stated
  • No bake or storage guidance is stated
ATLASWELDER 7018 Welding Rod 1/8" 10LB

ATLASWELDER 7018 Welding Rod 1/8" 10LB

ATLAS WELDER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1/8 inch low-hydrogen rod in a 10 lb pack, with a 5 lb pack also listed, for structural steel and heavy fabrication.

Pros

  • 10 lb pack, with a 5 lb pack also listed
  • All-position rod with excellent arc stability, per the listing
  • Low spatter, smooth beads and excellent slag release, per the listing
  • States use on bridges, pressure vessels and structural fabrication

Cons

  • No current range is stated for either diameter
  • No warranty term is stated
  • No bake or storage guidance is stated
  • Diameter is listed as 3/32 or 1/8 inch, so confirm the size on the pack before ordering
WISUNO Welding Rods,E7018 3/32’’ 1LB,Carbon Steel

WISUNO Welding Rods,E7018 3/32’’ 1LB,Carbon Steel

WISUNO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 inch E7018 rod in a 1 lb pack with stated current ranges and bake guidance for AC and DC use.

Pros

  • States current ranges for 1/16, 5/64, 3/32 and 1/8 inch diameters
  • Suitable for AC and DC and for all-position welding
  • Bake guidance stated: 350-380°C for 1 hour before welding
  • Easy arc initiation, stable arc and easy slag removal, per the listing

Cons

  • Only a 1 lb pack is listed, so it suits small jobs
  • No warranty term is stated
  • No impact value is stated
  • The listing gives current ranges for diameters the pack does not contain, so check the range for the size on the pack
7018 welding rod 3/32", 3LB Low-Hydrogen Welding

7018 welding rod 3/32", 3LB Low-Hydrogen Welding

Ottoeight9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 inch low-hydrogen rod in a 3 lb pack for carbon steel and structural steel work.

Pros

  • 3/32 inch (2.4 mm) diameter for control on smaller joints
  • Low-hydrogen iron powder electrode for shielded metal arc welding
  • Suitable for flat, horizontal, vertical-up and overhead welding
  • Smooth, stable arc with controlled spatter, per the listing

Cons

  • No current range is stated
  • No warranty term is stated
  • Only a 3 lb pack is listed, with no other pack weight stated
  • No bake or storage guidance is stated

7018 welding rod specs: diameter, length and pack

The specs on a 7018 listing answer the questions that matter: how wide the rod is, how long it is, how much rod the pack holds, and what current it runs at. A 3/32 inch rod suits smaller joints and thin plate, while a 1/8 inch rod suits heavier joints and structural steel. Length is 14 inches on the 1/8 inch rods here, and the other listings state no length, so check the pack before ordering if length matters.

Side by side

STARTECHWELD 7018 1/8 in ATLAS WELDER 7018 1/8 in WISUNO E7018 3/32 in Ottoeight 7018 3/32 in
Diameter 1/8 in 1/8 in 3/32 in 3/32 in
Length 14 in 14 in Not stated Not stated
Pack weight 5 lb 10 lb 1 lb 3 lb
Current range Not stated Not stated 50-80A at 3/32 in, 100-125A at 1/8 in Not stated
Positions All-position All-position All-position All-position
Electrode type Low-hydrogen iron powder Low hydrogen E7018 carbon steel Low-hydrogen iron powder
Impact value 78 ft-lbs at -20°F Not stated Not stated Not stated
Bake before welding Not stated Not stated 350-380°C for 1 hour Not stated

Polarity and machine settings follow the rod: check the door chart or manual on the machine before striking an arc, and follow the current range the listing states for the diameter on the pack.

What the digits in 7018 mean

The E7018 mark is the AWS classification the listings state, and the number meaning guide explains what each digit marks. What the listings add is the detail that matters on the bench: diameter, length, pack weight and current range.

Matching the rod to the joint

Start with the joint, then read the listing. A 3/32 inch rod suits smaller joints, thin plate small parts and cover welding that needs a clean, smooth surface, and the WISUNO listing states 50-80A for that diameter. A 1/8 inch rod suits structural steel, heavy fabrication and thicker joints, and the WISUNO listing states 100-125A for that diameter. Check the current range for the diameter on the pack, not for a diameter the pack does not hold.

  • Thin plate and small parts. A 3/32 inch rod, with the current range the listing states for that diameter.
  • Structural steel and heavy fabrication. A 1/8 inch rod, with the low spatter and slag release the ATLAS WELDER listing states.
  • Repair work and machinery maintenance. A 3/32 inch rod in a small pack, with the arc control the Ottoeight listing states for smaller joints.
  • Cold work. The STARTECHWELD listing states 78 ft-lbs at -20°F, the only impact value in this guide.

The rods: 7018 picks for the shop

Each rod below handles a part of the task: the 1/8 inch rods carry the structural work, the 3/32 inch rods carry the smaller joints and repair work, and each listing states its pack weight, while WISUNO states the current ranges and STARTECHWELD states the impact value.

Safety notes for stick welding

Stick welding throws arc flash, fumes and hot slag, so weld with ventilation or outdoors with the head out of the plume, wear safety glasses under the helmet when chipping slag, and clear dry grass and anything flammable from the area. Check the machine manual and the door chart for the settings, and check the listing for the current range before striking an arc.

For more options, see our welding consumables guides.

FAQ for welders

What does 7018 mean on a welding rod?

E7018 is the AWS classification the listings state for these rods, and every listing here describes its rod as a carbon steel electrode; STARTECHWELD, ATLAS WELDER and Ottoeight also call theirs low-hydrogen. The number meaning guide explains what each digit in the code marks, while the listings add the diameter, length and pack weight, and WISUNO adds the current ranges.

What diameters do 7018 rods come in?

The listings here state 3/32 inch and 1/8 inch diameters, and the WISUNO listing also names 1/16 inch and 5/64 inch diameters with current ranges for each. Match the diameter to the joint: a 3/32 inch rod suits smaller joints and thin plate, while a 1/8 inch rod suits structural steel and heavier joints.

What current should a 3/32 inch 7018 rod run at?

The WISUNO listing states 50-80A for a 3/32 inch rod and 100-125A for a 1/8 inch rod. Check the range for the diameter on the pack, and check the machine door chart or manual before welding.

Do 7018 rods need baking before welding?

The WISUNO listing states the electrode must be baked at 350-380°C for 1 hour and used right after baking, with rust, oil and moisture removed from the workpiece first. The other listings state no bake guidance, so follow the guidance on the pack for the rod in hand.

Can 7018 rods weld in all positions?

Yes, per the listings here: the ATLAS WELDER listing states flat, horizontal, vertical and overhead positions, the WISUNO listing states all-position welding, the Ottoeight listing states flat, horizontal, vertical-up and overhead positions, and the STARTECHWELD listing calls its rod an all-position electrode. Check the listing for the rod on the bench, since position ratings vary by listing.

Related: 3/32 vs 1/8 welding rod, 7018 welding rod uses, welding rods types, and the best 7018 1/8 welding rod picks.

More buying guides

Welding Consumables ·

Best Rust Remover for Chrome (2026)

5 rust removers for chrome compared on stated size, form, chrome use and warranty, from sprays and liquid polish to a gallon iron remover.