Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

7018 Welding Rod Uses: Where It Works Best

7018 welding rod suits structural steel, frames, pipelines and bridges, welding in all positions, with the YESWELDER and ARCCAPTAIN rods stated for AC or DC reverse polarity.

7018 Welding Rod Uses: Where It Works Best
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1YESWELDER E7018 5/32'' 10LB Welding Rods StickYESWELDER E7018 5/32'' 10LB Welding Rods Stick9.5/10View on Amazon
  2. 2ATLASWELDER 7018 Welding Rod 3/32" 10LBATLASWELDER 7018 Welding Rod 3/32" 10LB9.5/10View on Amazon
  3. 3ARCCAPTAIN E7018 Welding Rod 3/32" 10LB LowARCCAPTAIN E7018 Welding Rod 3/32" 10LB Low9.5/10View on Amazon
  4. 4Buelkmag E7018 Welding Rods 3/32'' 3LB LowBuelkmag E7018 Welding Rods 3/32'' 3LB Low9.4/10View on Amazon

A cracked trailer frame, a steel gate post, or a joint on a piece of farm equipment all ask the same thing of a weld: hold, and hold under load. 7018 welding rod uses cover exactly that kind of work, because the rod lays a low-hydrogen weld that resists cracking and holds up on structural steel. This guide walks through where 7018 rod works, which jobs it fits, and the rod sizes that match each job, using the listings WeldGearLab collected.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

YESWELDER E7018 5/32'' 10LB Welding Rods Stick

YESWELDER E7018 5/32'' 10LB Welding Rods Stick

YESWELDER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5/32 in, 14 in rod with a stated amperage range of 150A to 220A, for structural steel and medium grade carbon steels where no preheat is used.

Pros

  • Stated amperage range of 150A to 220A, the only range in this guide
  • Low-hydrogen iron powder rod for high quality x-ray welds
  • All positions on AC or DC reverse polarity
  • Steady arc, low spatter, high deposition efficiency

Cons

  • 10 lb pack only, with no smaller pack stated
  • No warranty term is stated
  • Amperage range starts at 150A, so the machine must reach that range
  • 5/32 in diameter suits thicker steel, and thin sheet is not named in the listing
ATLASWELDER 7018 Welding Rod 3/32" 10LB

ATLASWELDER 7018 Welding Rod 3/32" 10LB

ATLAS WELDER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 in rod with a 1/8 in size also stated, in 10 lb and 5 lb packs, for structural steel, bridges, pressure vessels and heavy fabrication.

Pros

  • Diameters stated: 3/32 in or 1/8 in
  • Pack weights stated: 5 lb and 10 lb
  • All-position welding in flat, horizontal, vertical and overhead positions
  • Smooth weld beads with minimal spatter and excellent slag release

Cons

  • No amperage range is stated
  • No warranty term is stated
  • 3/32 in suits thinner joints than the 5/32 in rod here
ARCCAPTAIN E7018 Welding Rod 3/32" 10LB Low

ARCCAPTAIN E7018 Welding Rod 3/32" 10LB Low

ARCCAPTAIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 in, 14 in rod for structural steel, frames, pipelines and ship hulls, with high tensile strength and crack resistance stated.

Pros

  • High tensile strength and good resistance to cracking stated
  • Outstanding X-ray values stated
  • All positions on AC or DC reverse polarity
  • Smooth and stable arc with less spatter

Cons

  • No amperage range is stated
  • No warranty term is stated
  • 10 lb pack only, with no smaller pack stated
  • 3/32 in suits thinner joints than the 5/32 in rod here
Buelkmag E7018 Welding Rods 3/32'' 3LB Low

Buelkmag E7018 Welding Rods 3/32'' 3LB Low

Buelkmag9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 in, 14 in rod in a 3 lb pack, for load-bearing structures, thick steel plates and heavy-duty structural repairs.

Pros

  • 3 lb pack, the smallest pack in this guide
  • All-position welding for thick and rigid steel structures
  • Ultra-low spatter with compact, uniform weld beads
  • Stated for load-bearing structures and heavy-duty structural repairs

Cons

  • No amperage range is stated
  • No warranty term is stated
  • Penetration is stated as moderate
  • 3 lb pack covers less work than the 10 lb packs here

7018 Welding Rod Uses by Job

The listings in this guide point 7018 rod at the same kind of work again and again: steel structures and frames, bridges, pressure vessels, pipelines, ship hulls, power plants and offshore rigs. The YESWELDER and ARCCAPTAIN listings call their rods low-hydrogen iron powder electrodes that produce high quality x-ray welds, and the ARCCAPTAIN listing states high tensile strength and good resistance to cracking. That mix is why the rod shows up on load-bearing structures and structural repairs. See the 6010 vs 7018 welding rod comparison for how 7018 differs from a fast-freeze rod.

7018 rod welds in all positions, per the listings, and the YESWELDER and ARCCAPTAIN listings state AC or DC reverse polarity. Flat, horizontal, vertical and overhead positions are all named, so the rod suits a joint you can only reach from below as well as a joint on the bench. The arc stays steady with low spatter, and the YESWELDER listing states excellent re-striking ability, so a rod that cools between passes picks up again without a fight. For more on polarity, see DC vs AC stick welding.

The rods that cover these jobs

The rods below cover the jobs above, from the 5/32 in rod for thicker structural joints to the 3 lb pack for a short repair.

Side by side

Gear Score Diameter Pack weight Best for
YESWELDER E7018 5/32 in 9.5/10 5/32 in 10 lb Low-alloy structurals, offshore rigs, power plants
ATLAS WELDER E7018 3/32 in 9.5/10 3/32 in or 1/8 in 10 lb or 5 lb Bridges, pressure vessels, heavy fabrication
ARCCAPTAIN E7018 3/32 in 9.5/10 3/32 in 10 lb Steel structures, pipelines, ship hulls, bridges
Buelkmag E7018 3/32 in 9.4/10 3/32 in 3 lb Load-bearing structures, heavy-duty repairs

Diameter is the main split: the 5/32 in YESWELDER rod runs on a stated 150A to 220A range and suits thicker steel, while the 3/32 in rods cover the rest of the work. Pack weight is the other split, with 10 lb packs for a run of joints and a 3 lb pack for a short repair. Match the rod to the joint and the machine, not to the pack size alone. See the best all-around stick welding rod guide for more rod choices.

What to know before you weld with 7018

  • Polarity. AC or DC reverse polarity, per the YESWELDER and ARCCAPTAIN listings. The ATLAS listing states no polarity, so check the rod packet for that rod.
  • Amperage. The YESWELDER listing states 150A to 220A for its 5/32 in rod. The other listings state no amperage range, so check the rod packet and the machine manual for those sizes.
  • Positions. All-position welding is stated, and the ATLAS listing names flat, horizontal, vertical and overhead positions.
  • Fit-up. The Buelkmag listing states its rod suits well-fitted joints, so close the gap before you strike an arc.

FAQ for welders

What is 7018 welding rod used for?

7018 rod is used for structural steel, frames, bridges, pressure vessels, pipelines, ship hulls, power plants and offshore rigs. The listings state low-hydrogen welds, and the ARCCAPTAIN listing states high tensile strength and good resistance to cracking, which suits load-bearing structures and structural repairs. It also covers tack welds for tubular wire applications, per the YESWELDER listing.

Can you weld 7018 in all positions?

Yes. The listings state all-position welding, and the ATLAS listing names flat, horizontal, vertical and overhead positions. That covers a joint you can only reach from below as well as a joint on the bench.

What polarity does 7018 use?

AC or DC reverse polarity, per the YESWELDER and ARCCAPTAIN listings. Set the machine to the polarity the rod packet states before you strike an arc.

What sizes do these rods come in?

The rods here come in 3/32 in, 1/8 in and 5/32 in diameters, all 14 in long. Pack weights are 10 lb, 5 lb and 3 lb. The ATLAS listing states 3/32 in or 1/8 in diameters and 5 lb or 10 lb packs, while the YESWELDER listing states a 5/32 in diameter in a 10 lb pack.

What amperage does the 5/32 in rod need?

The YESWELDER listing states recommended amperages of 150A to 220A for its 5/32 in rod. The other listings state no amperage range, so check the rod packet and the machine manual for those sizes.

Related: best 7018 welding rod for beginners, best stick welder for farm use, and the welding consumables hub. Also see the stick welders hub.

More buying guides

Welding Consumables ·

6010 Welding Rod Uses and Applications

6010 welding rod uses run from pipeline root passes to farm repair, and this guide matches each use to the diameters, packs and polarity…

Welding Consumables ·

Welding Rod Uses and Which Rod to Buy

Welding rods carry the filler metal and the flux that shield the weld, and this guide explains what each common rod is for and…