6011 Welding Rod Specifications and Sizes
The listings here describe E6011 rods for rusty, painted and galvanized steel in all positions on AC or DC, and this guide compares the diameters, lengths and pack sizes they state.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Forney 31210 E6011 Welding Rod, 1/8-Inch9.6/10View on Amazon - 2
Hobart 770458 6011 Stick, 3/32-10lbs9.6/10View on Amazon - 3
ATLASWELDER 6011 Welding Rod 1/8" 5LB9.6/10View on Amazon - 4
Victory Welding Alloys 6011 Welding Rod 5/32"9.6/10View on Amazon
A fence post cracked at the weld, a trailer frame needs a patch, and the steel is rusty, painted, or galvanized. That is the work 6011 rod is made for. 6011 welding rod specifications tell you the diameter, length, pack size, and power source each rod needs, so you can match the rod to the job and the machine you own.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Forney 31210 E6011 Welding Rod, 1/8-Inch
A 1/8 in E6011 rod in a 10 lb pack with a 90 day warranty, made for all-position work on dirty, rusty and painted steel.
Pros
- All-position rod for deep penetration and fast freezing
- Smooth arc with fast deposition and flatter contour fillets
- Runs on AC and DC+
- 90 day warranty against manufacturer defects
Cons
- Only a 10 lb pack is listed, with no 5 lb option
- 1/8 in only, with no 3/32 in or 5/32 in diameter listed
- Warranty covers 90 days only
- A 10 lb pack is a lot of rod for a single repair job

Hobart 770458 6011 Stick, 3/32-10lbs
A 3/32 in E6011 rod in a 10 lb pack rated at 60,000 PSI tensile strength, running AC or DCEP.
Pros
- 60,000 PSI tensile strength, stated in the listing
- All-position rod with deep penetration
- Runs on AC or DCEP reverse polarity
- 3/32 in diameter, the smallest here, for thinner steel
Cons
- 3/32 in diameter limits the rod to thinner steel than the 1/8 in and 5/32 in rods here
- Only a 10 lb pack is listed, with no 5 lb option
- No 1/8 in or 5/32 in diameter is listed
- At 10.6 lb item weight, it is the heaviest pack here to carry to the job

ATLASWELDER 6011 Welding Rod 1/8" 5LB
A 1/8 in E6011 rod in a 5 lb pack that runs AC or DC and welds through rust, paint and galvanized steel in all positions.
Pros
- Welds through rust, paint and galvanized steel with less surface prep
- All-position rod: flat, horizontal, vertical and overhead
- Runs on AC and DC power sources
- Comes in 3/32 in or 1/8 in, in 5 lb or 10 lb packs
Cons
- No warranty term is stated
- The 5 lb pack is the smallest pack here, so it runs out sooner on big repair jobs
- No 5/32 in diameter is listed for thicker steel
- The 1/8 in size is the thicker diameter listed, so it fits thicker steel rather than thin sheet

Victory Welding Alloys 6011 Welding Rod 5/32"
A 5/32 in E6011 rod in a 5 lb box for deep-penetrating, all-position welds on mild steel with AC or DC.
Pros
- Deep-penetrating welds on mild steel in all positions
- Welds through rusty, dirty or oily steel and poor fit-up
- Runs on small AC machines as well as DC units
- Strong arc force and fast solidification for out-of-position work
Cons
- No warranty term is stated
- Only a 5 lb box is listed, with no 10 lb option
- 5/32 in is the largest diameter here, so it suits thicker steel than the 1/8 in and 3/32 in rods
- The 5 lb box holds fewer rods than the 10 lb packs here
6011 welding rod specifications in one paragraph
E6011 is a stick electrode for mild steel, and every listing here describes it as an all-position rod. The Forney listing describes deep penetration and fast freezing, the STARTECHWELD listing describes deep-penetrating welds with fast solidification, and the Hobart listing describes deep penetration. The rods here run on AC or DC. The ATLASWELDER and Forney listings say their rods weld through rust, paint, and galvanized steel with minimal surface prep, and the STARTECHWELD listing says its rod welds through rusty, dirty, or oily steel. Diameters in this guide run from 3/32 in to 5/32 in, lengths are 14 in where the listing states one, and packs are 5 lb or 10 lb. Hobart lists 60,000 PSI tensile strength for its 3/32 in rod, and Forney lists a 90 day warranty against manufacturer defects.
Side by side
| ATLASWELDER 6011 1/8 in | STARTECHWELD 6011 5/32 in | Forney 31210 1/8 in | Hobart 770458 3/32 in | |
|---|---|---|---|---|
| Diameter | 1/8 in (3/32 in also listed) | 5/32 in | 1/8 in | 3/32 in |
| Length | 14 in | 14 in | Not stated | Not stated |
| Pack weight | 5 lb or 10 lb | 5 lb | 10 lb | 10 lb |
| Tensile strength | Not stated | Not stated | Not stated | 60,000 PSI |
| Positions | All positions | All positions | All positions | All positions |
| Power source | AC and DC | AC and DC | AC, DC+ | AC or DCEP |
| Warranty | Not stated | Not stated | 90 day warranty | Not stated |
Read the table by diameter first: it decides which rod suits the steel thickness and the machine you own. Then check length, pack weight, and power source. A 5 lb pack suits occasional repair work, while a 10 lb pack suits a shop that welds often.
The gear: 6011 rods for farm and shop repair
Each rod below handles one part of the repair work this guide covers, from the 3/32 in rod for lighter steel to the 5/32 in rod for thicker sections.
How to read the sizes
Diameter is the rod thickness, and the listings here give 3/32 in, 1/8 in, and 5/32 in. Length is the rod itself, and two listings here state 14 in. Pack weight is the box, and the listings here give 5 lb or 10 lb. Pick the diameter that matches the steel thickness and the machine you own, then check the pack weight against how much rod the job needs. When a listing does not state a figure, the table says so, and you should check the listing before you order.
What to check before you buy
- Power source. Every rod here runs on AC or DC, and the Hobart rod lists AC or DCEP reverse polarity. Check the power your machine gives before you order.
- Positions. Every rod here is an all-position rod: flat, horizontal, vertical, and overhead. If your repair is overhead, an all-position rod is what the listings describe.
- Pack size. Packs here are 5 lb or 10 lb. A 5 lb pack suits a single repair, while a 10 lb pack suits a shop that welds often.
- Warranty. Forney lists a 90 day warranty against manufacturer defects. The other listings here state no warranty term.
Galvanized steel and fumes. The ATLASWELDER, STARTECHWELD, and Forney listings say their rods weld galvanized steel, and welding galvanized steel makes zinc fumes. Weld outdoors or with strong ventilation, keep your head out of the plume, and wear a helmet and gloves. Clear dry grass and anything flammable from the area, and keep a fire extinguisher within reach. See the OSHA welding overview.
FAQ for welders
What does 6011 mean on a welding rod?
E6011 is a stick electrode for mild steel. The listings here describe it as an all-position rod. The Forney listing describes deep penetration and fast freezing, the STARTECHWELD listing describes deep-penetrating welds with fast solidification, and the Hobart listing describes deep penetration. Hobart lists 60,000 PSI tensile strength for its 6011 rod.
What diameters do 6011 rods come in?
The listings here give 3/32 in, 1/8 in, and 5/32 in. The Hobart rod is 3/32 in, the ATLASWELDER and Forney rods are 1/8 in, and the STARTECHWELD rod (on Amazon) is 5/32 in. Pick the diameter that matches the steel and the machine you own.
Do 6011 rods run on AC or DC?
Every rod here runs on AC or DC. The ATLASWELDER and STARTECHWELD rods list AC and DC, the Forney rod (on Amazon) lists AC and DC+, and the Hobart rod lists AC or DCEP reverse polarity. Check the power your machine gives before you order.
Can 6011 rods weld rusty or galvanized steel?
Yes, the listings say so. The ATLASWELDER rod welds through rust, paint, and galvanized steel, and the Forney rod is made for galvanized steel and rusty or oily steel. Weld galvanized steel outdoors or with strong ventilation, and keep your head out of the plume.
How long are 6011 welding rods?
The ATLASWELDER and STARTECHWELD listings state a 14 in length. The Forney and Hobart listings do not state a rod length. Check the listing for the rod you buy.
Related: our 6011 welding rod uses, welding rod number meanings, welding rods types, and the welding consumables hub. Also see our welding rod uses and stick welder vs MIG welder for farm repairs.




