Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Long Crucible Tongs (2026): 5 Picks for Metal Casting

Long crucible tongs for home casting, compared on length, jaw size, steel, pack count and what each listing states about fit and grip.

Best Long Crucible Tongs (2026): 5 Picks for Metal Casting
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LSMIITTH 19-Inch Pouring TongsBest OverallLSMIITTH 19-Inch Pouring Tongs9.6/10View on Amazon
  2. 2QWORK 16-Inch Tongs 2-PackBest Two-PackQWORK 16-Inch Tongs 2-Pack9.6/10View on Amazon
  3. 3Nelyrho 16-Inch Black TongsBest Hinged GripNelyrho 16-Inch Black Tongs9.6/10View on Amazon
  4. 4PDETVEO 16-Inch Steel TongsBest Serrated GripPDETVEO 16-Inch Steel Tongs9.6/10View on Amazon

A crucible full of molten metal needs a grip you can trust from arm’s length, and the best long crucible tongs keep your hands back from the heat while the jaws hold the crucible steady for the pour. This guide compares long crucible tongs on what each listing states: length, jaw size, steel, pack count and grip.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall LSMIITTH 19-Inch Pouring Tongs: 19 inch tongs with 4.3 inch jaws for 4.3 to 5.5 inch crucibles, 3.9 pounds. Check price on Amazon
  • Best Two-Pack QWORK 16-Inch Tongs 2-Pack: Two 16 inch stainless tongs with anti-skid jaws for melting and casting. Check price on Amazon
  • Best Hinged Grip Nelyrho 16-Inch Black Tongs: 16 inch hinged tongs in heavy-duty steel with a reinforced non-slip grip. Check price on Amazon
  • Best Serrated Grip PDETVEO 16-Inch Steel Tongs: 16 inch stainless tongs with serrated tips and balanced spring tension. Check price on Amazon

The machines

4KG-8Kg Crucible Tongs Set for Melting Metal

4KG-8Kg Crucible Tongs Set for Melting Metal

LSMIITTH9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

19 inch lifting and pouring tongs with 4.3 inch jaws for 4KG, 6KG and 8KG crucibles, in heavy duty steel.

Pros

  • Longest reach here at 19 inches for a safe distance
  • 4.3 inch jaws fit crucibles from 4.3 to 5.5 inches across
  • Built for lifting and pouring 4KG, 6KG and 8KG crucibles
  • Heavy duty steel, stated as anti-corrosion

Cons

  • No warranty term is stated
  • Jaws need heating and a hammer to adjust, per the maker
  • Fits only crucibles in the stated 4.3 to 5.5 inch range
  • One pair in the box, no spare
QWORK Crucible Tongs, 2 Pack 16" Stainless Steel

QWORK Crucible Tongs, 2 Pack 16" Stainless Steel

QWORK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 16 inch stainless steel crucible tongs with anti-skid jaws for melting and casting.

Pros

  • Two pairs in the box, so a spare is on hand
  • Stainless steel, stated as rust and heat resistant
  • Anti-skid jaws on top for a safe hold
  • Holds crucibles of different diameters for melting and casting

Cons

  • No warranty term is stated
  • No jaw size is stated, so fit is unconfirmed
  • No item weight is stated
  • 16 inch reach is shorter than the 19 inch LSMIITTH
Nelyrho 16" Black Crucible Tongs for Metal Casting

Nelyrho 16" Black Crucible Tongs for Metal Casting

Nelyrho9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

16 inch hinged crucible tongs in heavy-duty steel with a reinforced non-slip grip for casting and smelting.

Pros

  • Hinged design with a reinforced gripping structure
  • Heavy-duty steel for repeated high-temperature use
  • Non-slip grip to reduce slipping during pouring
  • Suits smelting, forging and handling graphite crucibles

Cons

  • No jaw size is stated, so fit is unconfirmed
  • No item weight is stated
  • One pair in the box, no spare
  • Named for small-scale casting, so check fit for larger crucibles
PDETVEO 16 Inch Crucible Tongs

PDETVEO 16 Inch Crucible Tongs

PDETVEO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

16 inch stainless steel crucible tongs with serrated tips and balanced spring tension for laboratory and industrial use.

Pros

  • Serrated tips for a secure hold on crucibles
  • Balanced spring tension for stable control
  • Stainless steel with enhanced corrosion resistance
  • Suits crucibles, beakers and other laboratory equipment

Cons

  • Aimed at laboratory use, so check it against foundry work
  • No jaw size is stated, so fit is unconfirmed
  • 16 inch reach is shorter than the 19 inch LSMIITTH
  • One pair in the box, no spare
United Scientific Supplies CTOS09 Oxidized Steel

United Scientific Supplies CTOS09 Oxidized Steel

United Scientific9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An oxidized steel crucible tong, sold singly, with the least detail stated of any pair here.

Pros

  • Oxidized steel, a standard crucible tong material
  • Simple steel tongs with no extra parts to fail
  • Named part number CTOS09 for reordering
  • Compact length for a small bench

Cons

  • Shortest reach in this set
  • No jaw size is stated, so fit is unconfirmed
  • No item weight is stated
  • No grip or jaw detail is stated

Spec sheet comparison

Tongs Gear Score Length Jaw size Material Pack Warranty
LSMIITTH 19-Inch Pouring Tongs 9.6/10 19 in 4.3 in Heavy duty steel 1 Not stated
QWORK 16-Inch Tongs 2-Pack 9.6/10 16 in Not stated Stainless steel 2 Not stated
Nelyrho 16-Inch Black Tongs 9.6/10 16 in Not stated Steel 1 Not stated
PDETVEO 16-Inch Steel Tongs 9.6/10 16 in Not stated Stainless steel 1 Not stated
United Scientific CTOS09 9.5/10 Not stated Not stated Oxidized steel 1 Not stated

All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026.

Buying guide: the best long crucible tongs for a home foundry

Length and reach

Length is the distance between your hands and the heat. The LSMIITTH tongs run 19 inches, the longest here, and the maker says that length gives a safe distance for lifting and pouring hot molten metal. The QWORK, Nelyrho and PDETVEO tongs all run 16 inches, while the United Scientific pair has no stated length in its title. Pick the longest reach your furnace and bench allow, and remember that a longer pair also needs more room to swing.

Jaw size and fit

Only the LSMIITTH listing states a jaw size: 4.3 inch jaws for crucibles with an outer diameter from 4.3 to 5.5 inches, in 4KG, 6KG and 8KG sizes. The maker warns that crucibles from other brands may run different sizes, and to make sure the tongs fully fit your crucibles before use. The other listings state no jaw size, so check the fit on a cold crucible before the pour.

Steel and grip

The QWORK and the PDETVEO pairs are stainless steel, with the QWORK stated as rust and heat resistant and the PDETVEO stated as corrosion resistant. The Nelyrho and LSMIITTH pairs are heavy-duty steel, and the United Scientific pair is oxidized steel. Grip differs too: the QWORK has anti-skid jaws, the Nelyrho has a reinforced non-slip grip, and the PDETVEO has serrated tips with balanced spring tension.

Pack count

The QWORK is the only 2-pack here, so it puts a spare pair on the bench. The other listings sell one pair each. A spare matters when a pour is already underway and a jaw slips, so weigh the 2-pack against the longer reach of the LSMIITTH.

Pouring control

A pouring pair needs to hold the crucible steady while it tips. The LSMIITTH is built for lifting and pouring, the Nelyrho is hinged with a reinforced grip, and the PDETVEO uses spring tension to hold its grip. Practice the lift and the tip with a cold, empty crucible before any hot metal is involved.

Use as directed. Melt outdoors or with strong ventilation, use dry tools and molds only, and wear a full face shield and leather PPE. Never melt unknown or sealed scrap, and keep the pour path clear of anything that can burn. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Check the jaw size against the crucible before heating anything: the LSMIITTH jaws are 4.3 inches for crucibles from 4.3 to 5.5 inches across.
  • Check the fit on a cold crucible first, and heat the LSMIITTH tongs to adjust the jaws with a hammer if the fit is off.
  • Keep molds and tools dry, and work outdoors or with strong ventilation.
  • Wear a full face shield and leather PPE for the pour, and keep the path clear.

FAQ for welders

How do you use crucible tongs?

Grip the crucible with the jaws, lift it clear of the furnace, and tip it steadily into the mold. The LSMIITTH listing says its 19 inch length gives a safe distance for lifting and pouring hot molten metal, and the Nelyrho listing says its reinforced grip reduces slipping during pouring. Check the fit on a cold crucible before the pour, and make sure the tongs fully fit your crucibles.

How long should crucible tongs be?

Long enough to keep your hands back from the heat. The tongs here run 16 and 19 inches, with the LSMIITTH at 19 inches the longest. Pick the longest reach your furnace and bench allow.

What size crucible do these tongs fit?

Only the LSMIITTH listing states a fit: 4.3 inch jaws for crucibles with an outer diameter from 4.3 to 5.5 inches, in 4KG, 6KG and 8KG sizes. The other listings state no jaw size, so measure your crucible and check the fit before use.

Are stainless steel crucible tongs better than plain steel?

It depends on the job. The QWORK and PDETVEO pairs are stainless steel, stated as rust resistant and corrosion resistant, while the Nelyrho and LSMIITTH pairs are heavy-duty steel. Stainless resists rust; heavy-duty steel suits repeated high-temperature use. Pick the steel that matches your furnace and how often you pour.

Do crucible tongs come with a warranty?

None of the listings here states a warranty term, so no pair earns warranty points in the Gear Score. If a warranty matters to you, ask the seller before ordering.

Related: knife casting, best graphite crucibles, best metal casting furnace, best graphite crucible with tongs, best graphite ingot molds, best stainless steel crucible tongs, best tongs for blacksmithing, best gold melting furnace, electric vs propane melting furnace, best sand for sand casting, sand casting vs investment casting, best steel ingot molds, best metal casting frame, best metal casting clay, best leather welding apron, best face shield for grinding metal, types of welding gloves, best bench vise for metal work, coal forge for beginners, propane forge temperature.

Scoring, line by line

Each pair of tongs is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Crucible tongs carry no electrical safety listing, so every pair here scores zero on that criterion; the ranking comes from the other four. No listing here states a warranty term, so no pair earns warranty points.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LSMIITTH 19-Inch Pouring Tongs 9.6 30 21 21 n/a 0
QWORK 16-Inch Tongs 2-Pack 9.6 29 21 21 n/a 0
Nelyrho 16-Inch Black Tongs 9.6 29 20 20 n/a 0
PDETVEO 16-Inch Steel Tongs 9.6 28 20 20 n/a 0
United Scientific CTOS09 9.5 26 19 19 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides

Knife Making and Casting ·

Best Stainless Steel Crucible Tongs (2026)

Four stainless steel crucible tongs for the foundry and the lab, compared on length, grip range, jaw design, what comes in the box and…

Metal Casting ·

Best Graphite Crucibles (2026): 4 Picks Compared

Four graphite crucibles for melting aluminum, gold, silver, copper and brass, compared on capacity, heat rating, pouring design and the warranty each listing states.