Best Graphite Ingot Molds (2026): 5 Picks Compared
Five graphite ingot molds compared by stated capacity, mold count, outer and inner size, heat figures and warranty, for home metal casting.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallMolten Masters 5kg Mold9.7/10View on Amazon - 2
Highest Heat FigureNelyrho 1kg Mold 2-Pack9.6/10View on Amazon - 3
Most Molds in SetNelyrho 1kg Mold 4-Piece9.6/10View on Amazon - 4
Strip IngotsHPZIHYNAP 6-Slot Strip Mold9.4/10View on Amazon - 5
Three SizesSCILUX 3-Size Mold Set9.4/10View on Amazon
Scrap on the bench is only worth pouring if the mold gives you a clean ingot you can stack, store and remelt. The best graphite ingot molds for that job separate on capacity, mold count and the heat figure the maker states. This guide compares five graphite molds on stated capacity, outer and inner size, mold count, heat figures and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Molten Masters 5kg Mold: Single mold stating 5 kg gold capacity, 1800°C heat figure and 2 year warranty Check price on Amazon
- Highest Heat Figure Nelyrho 1kg Mold 2-Pack: 2 molds at 1 kg each with a stated 2000°C heat figure Check price on Amazon
- Most Molds in Set Nelyrho 1kg Mold 4-Piece: 4 molds at 1 kg each in 99.9% graphite Check price on Amazon
- Strip Ingots HPZIHYNAP 6-Slot Strip Mold: Single mold with 6 strip slots and a 1 year warranty Check price on Amazon
- Three Sizes SCILUX 3-Size Mold Set: 3 molds in different sizes with a smooth inner surface Check price on Amazon
The machines

MMasters 5kg Premium Graphite Ingot Mold for Metal
A single 5 kg graphite mold with stated gold and silver capacities, a stated heat figure and a 2 year warranty, for casters pouring larger ingots.
Pros
- Holds up to 5 kg of gold or 2.65 kg of silver, as stated
- Heat resistant up to 1800°C (3272°F), as stated
- Graphite with less than 0.1% ash, as stated
- 2 year warranty stated
Cons
- Single mold, so each pour makes one ingot at a time
- Outer size is 7.08 x 2.75 x 1.97 inches, larger than the 1 kg molds here
- Volume is stated as 10.82 fl oz, which sets the pour size
- No second mold in the box for a spare pour

Nelyrho 2-Pack 2.2lbs Graphite Ingot Molds
A 2-pack of 1 kg graphite molds with stated inner and outer sizes and the highest stated heat figure here, for small batch casting.
Pros
- Includes 2 molds at 1 kg each, as stated
- Heat figure up to 2000°C (3632°F), as stated
- Inner size stated at 3.5 x 1.6 x 0.8 inches
- Graphite with less than 0.1% ash content, as stated
Cons
- Each mold is 1 kg size, so ingots stay small
- No warranty term with a length is stated
- Outer size is 4 x 2 x 1 inches per mold
- Two molds only, so batch size stays at two pours

Nelyrho 1kg 4-Piece Graphite Ingot Molds
A 4-piece set of 1 kg graphite molds in one size, for casters who pour several small ingots in a session.
Pros
- Includes 4 molds of the same size, as stated
- Graphite stated at 99.9% graphite
- External dimensions stated at 4.01 x 2.01 x 1.01 inches
- Metal release by turning the mold over, as stated
Cons
- Each mold is 1 kg size, so ingots stay small
- No heat figure in degrees is stated
- No warranty term is stated
- All four molds share one size, with no size choice

Graphite Ingot Crucible for Melting Metal
A single graphite mold with 6 long strip slots and a 1 year warranty, for casters who pour strip ingots.
Pros
- 6 long strip slots in one mold, as stated
- Size stated at 4.33 x 3.15 x 0.59 inches
- 1 year manufacturer warranty stated
- Graphite stated to resist thermal shock and wear
Cons
- Single mold, so strip count stops at 6 slots per pour
- Slot size is stated as one size for the mold
- No heat figure in degrees is stated
- Strip shape only, with no block ingot cavity

3 Sizes High Purity Graphite Ingot Mold Set
A set of 3 graphite molds in different sizes with a smooth inner surface, for casters who pour more than one ingot size.
Pros
- Includes 3 molds in different sizes, as stated
- High purity graphite, as stated
- Smooth inner surface for removal, as stated
- Reusable casting design, as stated
Cons
- No capacity figure in kg is stated
- No heat figure in degrees is stated
- No manufacturer warranty is provided, as stated
- Set size is stated as 7.3 x 5.3 x 1.5 inches
Spec sheet comparison
| Model | Gear Score | Molds in Set | Capacity | Outer Size | Heat Figure | Warranty |
|---|---|---|---|---|---|---|
| Molten Masters 5kg Mold | 9.7/10 | 1 | 5 kg gold | 7.08 x 2.75 x 1.97 in | 1800°C | 2 years |
| Nelyrho 1kg Mold 2-Pack | 9.6/10 | 2 | 1 kg each | 4 x 2 x 1 in | 2000°C | Not stated |
| Nelyrho 1kg Mold 4-Piece | 9.6/10 | 4 | 1 kg each | 4.01 x 2.01 x 1.01 in | Not stated | Not stated |
| HPZIHYNAP 6-Slot Strip Mold | 9.4/10 | 1 | Not stated | 4.33 x 3.15 x 0.59 in | Not stated | 1 year |
| SCILUX 3-Size Mold Set | 9.4/10 | 3 | Not stated | 7.3 x 5.3 x 1.5 in | Not stated | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026.
Buying guide: what matters in the best graphite ingot molds
Capacity and mold count
Capacity states how much metal one pour holds. The Molten Masters mold states up to 5 kg of gold or 2.65 kg of silver in a single mold. The Nelyrho sets state 1 kg per mold, with 2 molds in one set and 4 molds in the other. The SCILUX set states 3 molds in different sizes with no kg figure, and the HPZIHYNAP mold states 6 strip slots with no kg figure. A single large mold and a set of small molds solve different bench problems: one pour at a time, or several small pours in a session.
Outer size and inner size
Outer size states the mold body, and inner size states the cavity that forms the ingot. The Molten Masters outer size is 7.08 x 2.75 x 1.97 inches. The Nelyrho 2-pack states an outer size of 4 x 2 x 1 inches and an inner size of 3.5 x 1.6 x 0.8 inches. The Nelyrho 4-piece set states external dimensions of 4.01 x 2.01 x 1.01 inches. The HPZIHYNAP strip mold states 4.33 x 3.15 x 0.59 inches. Check the inner size where the maker states it, since the cavity sets the ingot size.
Heat figures and graphite grade
Heat figures state the temperature the maker rates the graphite to withstand. The Nelyrho 2-pack states up to 2000°C (3632°F), and the Molten Masters states up to 1800°C (3272°F). The other three sets state no heat figure in degrees. Graphite grade figures differ too: the Molten Masters and the Nelyrho 2-pack state less than 0.1% ash, and the Nelyrho 4-piece set states 99.9% graphite. Read the heat figure as a maker rating for the mold, and keep pours inside the stated figure for the exact mold you buy.
Release and reuse
Release wording states how the cooled ingot leaves the mold. The Molten Masters states self-lubricating properties for residue-free release. The Nelyrho 4-piece set states the ingot releases when the mold is turned upside down and tapped lightly. The SCILUX set states a smooth inner surface for easier removal, and the HPZIHYNAP mold states quick demolding after cooling. Reuse wording matters for repeat pours: the SCILUX set and the HPZIHYNAP mold both state a reusable design for repeated casting.
Use as directed. Melt and pour outdoors or with strong ventilation, with dry tools and dry molds only. Wear a full face shield and leather PPE for pours, and never melt unknown or sealed scrap. Follow the mold maker instructions for the metal you pour.
Before You Strike an Arc
- Check the stated outer size against your bench and tongs before the first pour.
- Confirm the mold count in the box matches the set you ordered.
- Keep molds dry before any pour, and store them dry between sessions.
- Check the cavity surface on arrival for chips before heating metal.
FAQ for welders
What size graphite ingot mold do I need?
Size follows the pour you plan. The Molten Masters mold states up to 5 kg of gold in one mold, while the Nelyrho molds state 1 kg per mold. The SCILUX set states 3 molds in different sizes with no kg figure.
How many molds come in these sets?
The Molten Masters and HPZIHYNAP picks are single molds, with 6 strip slots on the HPZIHYNAP mold. The Nelyrho sets hold 2 molds and 4 molds, and the SCILUX set holds 3 molds.
What heat figure do these graphite molds state?
The Nelyrho 2-pack states up to 2000°C (3632°F) and the Molten Masters states up to 1800°C (3272°F). The other three sets state no heat figure in degrees.
Do these graphite ingot molds carry a warranty?
The Molten Masters states a 2 year warranty and the HPZIHYNAP mold states a 1 year manufacturer warranty. The SCILUX set states no manufacturer warranty is provided.
Related: See every metal casting guide and all knife making and casting guides. Also see our best ingot mold kit, best steel ingot molds, best cast iron ingot molds and best metal casting furnace.
Scoring, line by line
Each mold is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Graphite ingot molds carry no electrical safety listing, so every mold here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Molten Masters 5kg Mold | 9.7 | 30 | 21 | 20 | n/a | 3 |
| Nelyrho 1kg Mold 2-Pack | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Nelyrho 1kg Mold 4-Piece | 9.6 | 29 | 20 | 20 | n/a | 0 |
| HPZIHYNAP 6-Slot Strip Mold | 9.4 | 26 | 19 | 14 | n/a | 2 |
| SCILUX 3-Size Mold Set | 9.4 | 27 | 19 | 18 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




