Best Graphite Crucibles (2026): 4 Picks Compared
Four graphite crucibles for melting aluminum, gold, silver, copper and brass, compared on capacity, heat rating, pouring design and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallTOAUTO 3KG Graphite Crucible9.5/10View on Amazon - 2
Biggest CapacityNelyrho 6KG Graphite Crucible9.4/10View on Amazon - 3
Smallest PourTOAUTO 1KG Graphite Crucible9.4/10View on Amazon - 4
Simplest PickGANGOU 3KG Graphite Crucible9.2/10View on Amazon
A melt day starts with a crucible that holds its shape under heat and pours clean when the metal is ready. A cracked crucible wastes the melt and the afternoon, and a crucible that is too small for the pour means heating another batch. This guide compares the best graphite crucibles for melting metal in a small shop, on what each maker states: capacity, heat rating, pouring design and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall TOAUTO 3KG Graphite Crucible: A 3KG crucible, 335ML, with grooved walls for removal from the furnace, a glaze layer, a stated ceiling of 3200°F in an air electric furnace, and a 1-year warranty. Check price on Amazon
- Biggest Capacity Nelyrho 6KG Graphite Crucible: A 6KG crucible, about 700ml, with a pouring spout for controlled pouring and a stated ceiling of 1800°C, 3272°F, for aluminum, gold, silver, copper and brass. Check price on Amazon
- Smallest Pour TOAUTO 1KG Graphite Crucible: A 1KG crucible, 112ML, with the same grooved walls, glaze layer and 1-year warranty as the larger TOAUTO pick, for small melts. Check price on Amazon
- Simplest Pick GANGOU 3KG Graphite Crucible: A 3KG high purity graphite crucible, sold as one crucible; size, heat rating and warranty are not stated. Check price on Amazon
The machines

TOAUTO 3KG Graphite Crucible for Metal Melting
A 3KG grooved graphite crucible, 335ML, with a glaze layer for corrosion resistance and a stated ceiling of 3200°F in an air electric furnace, backed by a 1-year warranty.
Pros
- Stated ceiling of 3200°F in an air electric furnace, and 5000°F in a vacuum or gas protection furnace
- Grooved walls the maker describes as made for easy removal from the furnace
- Glaze layer and dense molding material the maker states improve corrosion resistance and service life
- 1-year warranty with lifetime technical support and a 30-day return
Cons
- Cannot be heated in a carbon furnace or charcoal kiln; oxidation starts at 752°F, 400°C
- No pouring spout is stated, unlike the Nelyrho pick
- A 335ML size suits small melts only; a bigger melt needs the 6KG pick
- No lid, tongs or mold is stated with the crucible

TOAUTO 1KG Graphite Crucible for Metal Melting
A 1KG grooved graphite crucible, 112ML, with the same glaze layer, furnace ceilings and 1-year warranty as the larger TOAUTO pick, for small melts.
Pros
- Same stated ceilings as the 3KG pick: 3200°F in an air electric furnace, 5000°F in a vacuum or gas protection furnace
- Grooved walls the maker describes as made for easy removal from the furnace
- Glaze layer and dense molding material the maker states improve corrosion resistance and service life
- 1-year warranty with lifetime technical support and a 30-day return
Cons
- A 112ML size suits very small melts only
- Cannot be heated in a carbon furnace or charcoal kiln; oxidation starts at 752°F, 400°C
- No pouring spout is stated
- No lid, tongs or mold is stated with the crucible

Nelyrho 6KG Graphite Crucible with Pouring Spout
A 6KG silicon carbide graphite crucible, about 700ml, with a pouring spout and a stated ceiling of 1800°C, 3272°F, for aluminum, gold, silver, copper and brass.
Pros
- Largest capacity here at 6KG, about 700ml
- Built-in pouring spout for controlled, safer pouring of molten metal
- Silicon carbide graphite rated to 1800°C, 3272°F
- Stated for propane melting furnaces, gas furnaces, kilns, ovens and coal stoves
Cons
- No warranty term is stated
- No lid, tongs or mold is stated with the crucible
- At 3.2 lb it is the heaviest crucible here
- A 5.9 inch height and 4.7 inch width need a furnace that fits them

Graphite Crucible, 1kg/2kg/3kg High Purity
A 3KG high purity graphite crucible, sold as a single crucible for melting gold, silver and copper; size, heat rating and warranty are not stated.
Pros
- High purity graphite construction
- A 3KG size, the same capacity as the TOAUTO 3KG pick
- Stated for melting gold, silver and copper
- Stated for furnace casting mould and jewelry work
Cons
- No heat rating is stated
- No dimensions or weight are stated
- No warranty term is stated
- No pouring spout is stated
Compare the best graphite crucibles
| Model | Gear Score | Capacity | Heat rating | Size | Warranty |
|---|---|---|---|---|---|
| TOAUTO 3KG Graphite Crucible | 9.5/10 | 3KG, 335ML | 3200°F, air electric furnace | 75 mm dia, 170 mm high | 1 year |
| TOAUTO 1KG Graphite Crucible | 9.4/10 | 1KG, 112ML | 3200°F, air electric furnace | 65 mm dia, 125 mm high | 1 year |
| Nelyrho 6KG Graphite Crucible | 9.4/10 | 6KG, approx. 700ml | 1800°C, 3272°F | 4.7 x 4.7 x 5.9 in | Not stated |
| GANGOU 3KG Graphite Crucible | 9.2/10 | 3KG | Not stated | Not stated | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 November 2026.
How the picks were scored
Each crucible is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety certification, so every crucible here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TOAUTO 3KG Graphite Crucible | 9.5 | 29 | 21 | 21 | 0 | 2 |
| TOAUTO 1KG Graphite Crucible | 9.4 | 27 | 20 | 19 | 0 | 2 |
| Nelyrho 6KG Graphite Crucible | 9.4 | 30 | 21 | 20 | 0 | 0 |
| GANGOU 3KG Graphite Crucible | 9.2 | 18 | 15 | 15 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.
Buying guide: what matters in a graphite crucible
Capacity and size
Capacity decides how much metal a single melt holds. The picks here run from a 1KG crucible at 112ML to a 6KG crucible at about 700ml, with two 3KG picks in between, one at 335ML. Check diameter and height against the furnace before ordering: the TOAUTO 3KG lists 75 mm in diameter and 170 mm high, the TOAUTO 1KG lists 65 mm in diameter and 125 mm high, and the Nelyrho lists 4.7 inches by 4.7 inches by 5.9 inches.
Heat rating and furnace type
Match the crucible to the furnace and the heat the melt needs. The Nelyrho is rated to 1800°C, 3272°F, and the maker lists it for propane melting furnaces, gas furnaces, kilns, ovens and coal stoves. The TOAUTO picks state 3200°F in an air electric furnace and 5000°F in a vacuum or gas protection furnace, and warn that a carbon furnace or charcoal kiln oxidizes the graphite and cracks it, with oxidation starting at 752°F, 400°C. The GANGOU states no heat rating and no furnace type.
Material and build
Material decides how the crucible handles repeated heats. The Nelyrho is silicon carbide graphite, which the maker describes as heavy duty with a longer service life than standard clay crucibles. The TOAUTO picks are grooved graphite with a glaze layer and dense molding material, which the maker states improves corrosion resistance and service life. The GANGOU is high purity graphite, with nothing else stated about its build.
Pouring design
A good pour is controlled and steady. The Nelyrho has a built-in pouring spout, which the maker describes as giving controlled and safer pouring with less spill risk. The TOAUTO picks are grooved for removal from the furnace, which helps when the crucible comes out hot. None of the four picks states a lid, tongs or mold in the box; see the best graphite crucible with tongs guide for sets that include them.
Warranty and support
A stated warranty says something about how the maker stands behind the crucible. The two TOAUTO picks state a 1-year warranty with lifetime technical support and a 30-day return. The Nelyrho and the GANGOU state no warranty term. For more casting gear, the deals on graphite crucibles hub lists related picks.
Use as directed. Melt outdoors or with strong ventilation, with dry tools and molds only, and wear a full face shield and leather PPE. Never melt unknown or sealed scrap, and never leave a lit furnace unattended. See the Safety Disclaimer.
Before You Strike an Arc
- Match the crucible to the furnace: the Nelyrho lists propane melting furnaces, gas furnaces, kilns, ovens and coal stoves, while the TOAUTO picks warn against carbon furnaces and charcoal kilns.
- Check the crucible on arrival: grooved walls and a glaze layer on the TOAUTO picks, a pouring spout on the Nelyrho, and a plain high purity body on the GANGOU.
- Keep tools and molds dry, and have a full face shield and leather PPE ready before the melt starts.
- Match capacity to the melt: a 1KG crucible at 112ML suits small pours, while the 6KG crucible at about 700ml suits larger batches.
FAQ for welders
How do you use a graphite crucible?
Set the crucible in a compatible melting furnace, add the metal, and bring it to a melt before lifting and pouring. The Nelyrho has a pouring spout for a controlled pour, and the TOAUTO picks are grooved for removal from the furnace. Work outdoors or with strong ventilation, with dry tools and molds only, and wear a full face shield and leather PPE.
How is a graphite crucible made?
The listings here do not state how each crucible is made. They state the materials: the Nelyrho is silicon carbide graphite, the TOAUTO picks are graphite with a glaze layer and dense molding material, and the GANGOU is high purity graphite. What matters for the buyer is the stated capacity, heat rating and warranty, not the process behind the graphite.
What metals can you melt in a graphite crucible?
The Nelyrho lists aluminum, gold, silver, copper and brass. The TOAUTO picks are stated for gold, silver, copper, brass and aluminum, and for jewelry work. The GANGOU is stated for gold, silver and copper. Never melt unknown or sealed scrap.
Can a graphite crucible go in a charcoal furnace?
Not the TOAUTO picks: the maker warns that a graphite crucible cannot be heated by a carbon furnace or charcoal kiln, since it oxidizes and cracks, with oxidation starting at 752°F, 400°C. The TOAUTO picks state 3200°F in an air electric furnace and 5000°F in a vacuum or gas protection furnace. The Nelyrho lists propane melting furnaces, gas furnaces, kilns, ovens and coal stoves instead.
What size graphite crucible do I need?
Match the crucible to the melt and the furnace. The picks here cover a 1KG crucible at 112ML, two 3KG crucibles, one at 335ML, and a 6KG crucible at about 700ml. Check the stated diameter and height against the furnace before ordering, and leave room to lift the crucible out.
Related: best graphite crucible with tongs, best graphite ingot molds, graphite vs silicon carbide crucible, best metal casting furnace, best electric furnace crucible, and the metal casting hub.



