Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Graphite Crucible with Tongs (2026): 5 Sets Compared

Five graphite crucible and tongs sets for melting gold, silver and copper, compared on capacity, heat rating, tongs, molds and warranty.

Best Graphite Crucible with Tongs (2026): 5 Sets Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Nelyrho 6KG SetBest OverallNelyrho 6KG Set9.7/10View on Amazon
  2. 2CANALHOUT 3.5KG SetBest Complete KitCANALHOUT 3.5KG Set9.6/10View on Amazon
  3. 3LAIKOU 26 Inch TongsLongest ReachLAIKOU 26 Inch Tongs9.5/10View on Amazon
  4. 4SCILUX 3KG CrucibleClearest CapacitiesSCILUX 3KG Crucible9.5/10View on Amazon

The mold sits ready on the bench, the furnace hums at heat, and the crucible inside holds a full charge of molten metal. The lift out of the furnace and the tilt into the mold take only a few seconds, and the tongs are the only thing holding the pour steady. A best graphite crucible with tongs pairs a crucible that holds its shape at heat with tongs that grip it firm from lift to pour, so the metal lands in the mold and not on the floor.

This roundup compares five graphite crucible and tongs sets on what each listing states: capacity, heat rating, tongs, what comes in the box, and the warranty in writing. Two sets are complete kits with a mold or a spare crucible, one set states melt weights, one is long tongs only, and one is a wide casting kit. Sets like these belong with the shop’s graphite crucible and tongs gear, and the notes below call out where each set fits and where it falls short.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Nelyrho 6KG Set: Two spouted crucibles and separate lifting and pouring tongs for a 6KG furnace, with a 1 year warranty. Check price on Amazon
  • Best Complete Kit CANALHOUT 3.5KG Set: A 3.5KG spouted crucible with 2-in-1 tongs, an ingot mold and gloves in one box. Check price on Amazon
  • Longest Reach LAIKOU 26 Inch Tongs: 26 inch steel tongs that clamp 3 to 5KG crucibles, with a 12 month warranty; crucible not included. Check price on Amazon
  • Clearest Capacities SCILUX 3KG Crucible: A 3KG crucible with tongs that lists melt weights for gold, silver, copper and aluminum. Check price on Amazon

The machines

Nelyrho 6kg/13.2lbs Crucible Tongs Set for Metal

Nelyrho 6kg/13.2lbs Crucible Tongs Set for Metal

Nelyrho9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6KG set with two spouted graphite crucibles and separate lifting and pouring tongs, plus a 1 year manufacturer warranty.

Pros

  • Two pouring-spout crucibles in the box, so a spare is ready
  • Separate lifting and pouring tongs for each step of the pour
  • Crucibles rated up to 3272°F (1800°C)
  • 1 year manufacturer warranty in the listing

Cons

  • No ingot mold in the box
  • No gloves in the box
  • Made for compatible 6KG furnaces, so measure the furnace before ordering
  • Both crucibles are the same 6KG size, so small melts use a large crucible
CANALHOUT 3.5kg Crucible Tongs Set for Metal

CANALHOUT 3.5kg Crucible Tongs Set for Metal

CANALHOUT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3.5KG spouted graphite crucible with 2-in-1 lifting and pouring tongs, an ingot mold and heat-resistant gloves.

Pros

  • One tongs does lifting and pouring, so one tool covers the pour
  • Spouted crucible rated up to 3272°F (1800°C)
  • Ingot mold and heat-resistant gloves in the box
  • Stated fit for most 3KG+ furnaces

Cons

  • No warranty term is stated
  • Only one crucible in the box, no spare
  • 3.5KG size only, no larger crucible for bigger melts
  • Made for 3KG+ furnaces, so a smaller furnace may not take it
26" ProCast Foundry Crucible Flask Tongs

26" ProCast Foundry Crucible Flask Tongs

LAIKOU9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

26 inch heavy-duty steel tongs that clamp 3 to 5KG crucibles, with a 12 month warranty and no crucible in the box.

Pros

  • 26 inch length keeps hands clear of the heat
  • Clamps 3 to 5KG crucibles up to 6 inches in diameter, ideally up to 7 inches
  • Heavy-duty steel with a black finish
  • 12 months warranty in the listing

Cons

  • No crucible in the box, tongs only
  • Clamp grips the crucible edge only, so it does not wrap the crucible
  • Rated to 2912°F at the top end, below the 3272°F crucibles here
  • Suits crucibles up to 7 inches in diameter, so larger crucibles do not fit
3KG High Purity Graphite Crucible with Tongs

3KG High Purity Graphite Crucible with Tongs

SCILUX9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3KG graphite crucible with tongs that lists melt weights for gold, silver, copper and aluminum, rated up to 1800°C.

Pros

  • Lists melt weights for gold, silver, copper and aluminum
  • Crucible rated up to 1800°C
  • Tongs included in the box
  • 1.4 lb item weight, easy to lift and store

Cons

  • 3KG capacity only, a small size for larger melts
  • 290ML volume, a small volume for larger pours
  • No ingot mold in the box
  • No gloves in the box
8 Pcs Metal Casting Melting Crucible Kit

8 Pcs Metal Casting Melting Crucible Kit

Heygueo9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8 piece casting kit with a quartz crucible, a graphite clay crucible, a 5-in-1 mold, a stir rod and tongs.

Pros

  • 8 pieces in the box, including a 5-in-1 graphite mold and a stir rod
  • Quartz crucible and graphite clay crucible in one kit
  • Tongs included for handling the crucible
  • Suits gold, silver, copper and aluminum work

Cons

  • No warranty term is stated
  • Longest piece measures 16.5 inches, so the kit needs long storage
  • 5-in-1 mold gives five shapes in one block, with no separate mold to swap in
  • No gloves in the box

Spec sheet comparison

Model Gear Score Capacity Heat rating Tongs In the box Warranty
Nelyrho 6KG Set 9.7/10 6KG Up to 3272°F (1800°C) Lifting and pouring, separate 2 crucibles, 2 tongs 1 year
CANALHOUT 3.5KG Set 9.6/10 3.5KG Up to 3272°F (1800°C) 2-in-1 lifting and pouring Crucible, tongs, mold, gloves None stated
LAIKOU 26 Inch Tongs 9.5/10 Not stated (tongs only) 1560°F to 2912°F (850°C to 1600°C) 26 in clamp-style Tongs only 12 months
SCILUX 3KG Crucible 9.5/10 3KG / 290ML Up to 1800°C Included Crucible, tongs None stated
Heygueo 8 Piece Kit 9.4/10 Not stated Not stated Included 8 pieces incl. mold, stir rod None stated

All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026.

How to pick the best graphite crucible with tongs

Capacity and furnace fit

Capacity runs from 3KG to 6KG here. The SCILUX is a 3KG crucible, the CANALHOUT is a 3.5KG set, and the Nelyrho is a 6KG set with two crucibles. Match the crucible to the furnace first: the Nelyrho suits compatible 6KG melting furnaces, the CANALHOUT suits most 3KG+ furnaces, and the LAIKOU tongs clamp 3 to 5KG crucibles up to 6 inches in diameter, ideally up to 7 inches. Measure the furnace interior against the crucible size before ordering.

Heat rating

Three crucibles here state a heat rating. The CANALHOUT and Nelyrho crucibles are rated up to 3272°F (1800°C), and the SCILUX crucible is rated up to 1800°C. The LAIKOU tongs are rated to withstand 1560°F to 2912°F (850°C to 1600°C), which is below the crucible ratings, so the tongs set the ceiling on that pour. The Heygueo kit states no heat rating, so there is no stated ceiling.

Tongs: lifting, pouring, or both

Tongs come three ways here. The CANALHOUT uses one-piece tongs that lift and pour, the Nelyrho gives separate lifting tongs and pouring tongs, and the LAIKOU is a 26 inch clamp that grips the crucible edge. Separate tongs let one step follow the other without re-gripping, while a 2-in-1 pair keeps the kit to one tool. The LAIKOU length keeps hands clear of the heat.

What comes in the box

The box matters as much as the crucible. The CANALHOUT adds an ingot mold and heat-resistant gloves, the Nelyrho adds a second crucible, and the Heygueo adds a 5-in-1 mold and a stir rod. The SCILUX keeps it plain with a crucible and tongs, and the LAIKOU ships tongs only, so the crucible must come from elsewhere. Count the pieces against the job: a spare crucible keeps melts going, and a mold turns the pour into ingots.

Warranty in writing

Two listings here state a warranty term. Nelyrho lists a 1 year manufacturer warranty, and LAIKOU lists 12 months. The other three listings state no warranty term. A stated term counts for more than warm words when a crucible cracks, so weigh it with capacity and heat rating when the scores are close.

Use as directed. Melt outdoors or with strong ventilation, keep tools and molds dry, and wear a full face shield and leather gloves for every pour. Never melt unknown or sealed scrap. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Check the crucible size against the furnace interior before the first melt.
  • Preheat the tongs and keep crucibles and tongs dry; inspect each piece before use.
  • Wear heat-resistant gloves and a full face shield for the lift and the pour.
  • Set the ingot mold on a flat, dry surface before the crucible leaves the furnace.
  • Keep a spare crucible on hand when the kit includes one, so a cracked crucible does not end the session.

FAQ for welders

What size graphite crucible do I need for a home furnace?

Match the crucible to the furnace, not to the melt alone. The sets here run from a 3KG crucible to a 6KG set, and the LAIKOU tongs clamp 3 to 5KG crucibles up to 6 inches in diameter, ideally up to 7 inches. Measure the furnace interior before ordering, since a crucible that does not fit cannot be used at heat.

How hot can a graphite crucible get?

It depends on the crucible. The CANALHOUT and Nelyrho crucibles are rated up to 3272°F (1800°C), and the SCILUX crucible is rated up to 1800°C. The LAIKOU tongs are rated to 2912°F at the top end, so the tongs can set the ceiling. The Heygueo kit states no heat rating.

Do I need separate lifting and pouring tongs?

Not always. The Nelyrho set gives separate lifting tongs and pouring tongs, so each step has its own tool, while the CANALHOUT uses one-piece tongs that lift and pour. The LAIKOU is a single clamp for the pour. Separate tongs suit frequent pours, and a 2-in-1 pair suits a small kit.

What metals can I melt in a graphite crucible?

The sets here name gold, silver, copper and aluminum. The SCILUX lists melt weights of about 5.6KG of gold, 3.04KG of silver, 2.6KG of copper and 0.8KG of aluminum, and the Heygueo kit suits the same four metals. Melt outdoors or with strong ventilation, keep tools and molds dry, and never melt unknown or sealed scrap.

What should I check before the first melt?

Check the fit and the dryness first. Confirm the crucible size against the furnace interior, preheat the tongs, and inspect the crucible and tongs before use. Wear heat-resistant gloves and a full face shield, set the mold on a flat, dry surface, and keep the pour path clear.

Related: Best Graphite Ingot Molds (2026): 5 Picks Compared, Best Metal Casting Furnace (2026): 5 Picks Compared, Best Electric Furnace Crucible (2026): 4 Compared, and the knife casting hub. Also see our Graphite vs Silicon Carbide Crucible: Which One Should You Buy?. Also see our Graphite vs Clay Crucible: Which One Should You Buy?. Also see our Best Gold Melting Furnace (2026): 5 Electric and Propane Picks. Also see our Best Tongs for Blacksmithing (2026): 5 Picks for the Forge. Also see our Best Ingot Mold Kit (2026): 5 Graphite Casting Kits.

Scoring, line by line

Each set is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Crucible sets have no safety listing to state, so the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Nelyrho 6KG Set 9.7 30 21 21 n/a 2
CANALHOUT 3.5KG Set 9.6 29 21 22 n/a 0
LAIKOU 26 Inch Tongs 9.5 24 21 18 n/a 2
SCILUX 3KG Crucible 9.5 28 20 20 n/a 0
Heygueo 8 Piece Kit 9.4 23 19 19 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides