Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Metal Casting Frame (2026): 5 Sand Casting Frames Compared

Five sand casting frames for jewelry and small metal parts, compared on frame size, material, locating pins, included extras and the warranty each listing states.

Best Metal Casting Frame (2026): 5 Sand Casting Frames Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BoldWay 6.35 in Frame with SandBest OverallBoldWay 6.35 in Frame with Sand9.7/10View on Amazon
  2. 2BoldWay 6.35 in FrameBest Frame OnlyBoldWay 6.35 in Frame9.6/10View on Amazon
  3. 3Nelyrho Flask with Leveling PlateBest Leveling PlateNelyrho Flask with Leveling Plate9.6/10View on Amazon
  4. 4Otoolling 10 in Flask KitLargest FrameOtoolling 10 in Flask Kit9.5/10View on Amazon

Sand casting starts with a frame that holds the sand tight around the pattern while the metal goes in. A loose frame shifts, the mold line wanders, and the casting comes out wrong. A good best metal casting frame keeps the halves lined up, holds its shape under heat, and lets the sand pack down clean. This guide compares cast iron and aluminum frames for jewelry and small metal work on frame size, material, pins, included extras and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall BoldWay 6.35 in Frame with Sand: Frame plus 6 lb of 400-mesh casting sand, a 1538 C heat rating, and a 5-year warranty. Check price on Amazon
  • Best Frame Only BoldWay 6.35 in Frame: The same 6.35 x 3.82 x 2.36 inch frame and 5-year warranty, without the sand. Check price on Amazon
  • Best Leveling Plate Nelyrho Flask with Leveling Plate: A cast iron leveling plate and 2 locking knobs, with a 3.9 x 2.7 x 2.8 inch interior. Check price on Amazon
  • Largest Frame Otoolling 10 in Flask Kit: About 10 x 10 x 2.5 inches for larger castings, knife pommels and guards. Check price on Amazon

The machines

6.35"*3.82"*2.36" Split-Type cast Iron Sand Mold

6.35"*3.82"*2.36" Split-Type cast Iron Sand Mold

BoldWay9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A split-type cast iron frame with 6 lb of ultra-fine 400-mesh natural casting sand, rated to withstand temperatures up to 1538 C, with a 5-year warranty.

Pros

  • Includes 6 lb of natural casting sand, ultra-fine 400 mesh
  • Withstands temperatures up to 1538 C, per the maker
  • Four locating pins hold the frame for neat, precise alignment
  • 5-year warranty in the listing

Cons

  • The 6.35 x 3.82 x 2.36 inch frame suits small patterns such as coins, rings and jewelry
  • Locating pins can feel stiff and need lubricant to separate easily
  • Frame and sand together weigh 6.0 lb
  • No leveling plate in the box
6.35"*3.82"*2.36" Split-Type cast Iron Sand Mold

6.35"*3.82"*2.36" Split-Type cast Iron Sand Mold

BoldWay9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A split-type cast iron frame, 6.35 x 3.82 x 2.36 inches, rated to withstand temperatures up to 1538 C, with a 5-year warranty. Sand is not part of this listing.

Pros

  • Withstands temperatures up to 1538 C, per the maker
  • Four locating pins hold the frame for neat, precise alignment
  • 5-year warranty in the listing
  • High-strength iron with a black oxidation finish

Cons

  • Sand is not part of this listing, so you need sand on hand
  • The 6.35 x 3.82 x 2.36 inch frame suits small patterns such as coins, rings and jewelry
  • Locating pins can feel stiff and need lubricant to separate easily
  • No leveling plate in the box
Nelyrho 2-Part Cast Iron Flask Mold Frame

Nelyrho 2-Part Cast Iron Flask Mold Frame

Nelyrho9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-part cast iron flask with 4 alignment pins, 2 locking knobs and a sand leveling plate, with a 3.9 x 2.7 x 2.8 inch interior and a 1-year warranty.

Pros

  • Includes a cast iron sand leveling plate
  • 2 locking knobs plus 4 alignment pins hold the halves
  • Interior of 3.9 x 2.7 x 2.8 inches is stated for planning
  • Suits small items such as rings, pendants and keychains

Cons

  • Casting sand is not included
  • The 3.9 x 2.7 x 2.8 inch interior suits small patterns only
  • 1-year warranty, shorter than the 5-year terms here
  • Interior height of 2.8 inches limits tall patterns
2-Part Cast Iron Flask Mold Frame for Sand Casting

2-Part Cast Iron Flask Mold Frame for Sand Casting

besttruck9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-part cast iron flask mold frame, 6.9 x 4.0 x 2.8 inches, with 4 locating pins and a black oxidation finish, with a 1-year warranty.

Pros

  • Four locating pins hold the frames for neat, exact alignment
  • Black oxidation finish, stated to prevent rust
  • Suits gold, silver, copper and brass
  • Works with Petro bond, Delft and sand casting clay

Cons

  • 1-year warranty, shorter than the 5-year terms here
  • Casting sand is not part of the set
  • The 6.9 x 4.0 x 2.8 inch frame suits small patterns such as coins, rings and jewelry
  • Pins only hold the halves, with no locking knobs in the set
Otoolling 2 Part Sand Casting Flask Mold Frame

Otoolling 2 Part Sand Casting Flask Mold Frame

Otoolling9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An extra large 2-part sand casting flask, about 10 x 10 x 2.5 inches, with an aluminum body, a black powder coated finish and hex head screws, for large castings, jewelry, knife pommels and guards.

Pros

  • Largest frame here at about 10 x 10 x 2.5 inches
  • Suits large castings, knife pommels and guards
  • Aluminum body with a black powder coated finish
  • Hex head screws in the kit

Cons

  • No warranty term is stated
  • The large frame needs more casting sand per pour than the small frames here
  • Sand is not part of the kit
  • At about 10 x 10 inches it needs bench space the small frames do not

Spec sheet comparison

Model Gear Score Frame size Material Locating pins Extras Warranty
BoldWay 6.35 in Frame with Sand 9.7/10 6.35 x 3.82 x 2.36 in Cast iron 4 6 lb casting sand, 400 mesh 5 years
BoldWay 6.35 in Frame 9.6/10 6.35 x 3.82 x 2.36 in Cast iron 4 None stated 5 years
Nelyrho Flask with Leveling Plate 9.6/10 3.9 x 2.7 x 2.8 in interior Cast iron 4, plus 2 locking knobs Leveling plate 1 year
besttruck Cast Iron Flask Frame 9.5/10 6.9 x 4.0 x 2.8 in Cast iron 4 None stated 1 year
Otoolling 10 in Flask Kit 9.5/10 About 10 x 10 x 2.5 in Aluminum 4 Hex head screws None stated

Ratings in this table are the makers’ own claims taken from each product page (21 November 2026).

How the picks were scored

Each frame is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. None of these frames states a safety certification, so every frame here scores zero on that criterion, and the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
BoldWay 6.35 in Frame with Sand 9.7 30 21 22 n/a 4
BoldWay 6.35 in Frame 9.6 28 21 20 n/a 4
Nelyrho Flask with Leveling Plate 9.6 28 20 20 n/a 2
besttruck Cast Iron Flask Frame 9.5 26 20 20 n/a 2
Otoolling 10 in Flask Kit 9.5 27 19 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

Buying guide: what matters in a best metal casting frame

Frame size

Size decides what pattern fits. The Nelyrho interior is 3.9 x 2.7 x 2.8 inches, the BoldWay frames are 6.35 x 3.82 x 2.36 inches, the besttruck frame is 6.9 x 4.0 x 2.8 inches, and the Otoolling frame is about 10 x 10 x 2.5 inches. Leave room around the pattern for casting sand and pouring channels, as the Nelyrho listing states. A frame that barely holds the pattern leaves no room for sand, and a frame far larger than the pattern wastes sand at each pour. Match the frame to the pattern, then check the interior against the pattern size.

Cast iron or aluminum

Four frames here are cast iron, and the Otoolling frame has an aluminum body. The cast iron frames carry a black oxidation finish, stated to prevent rust and reduce deformation, while the Otoolling frame has a black powder coated finish. Cast iron is the standard flask material in this guide. The aluminum Otoolling frame weighs 4.19 lb at about 10 x 10 x 2.5 inches.

Pins, knobs and screws

Every frame here uses 4 locating pins to hold the halves in line. The Nelyrho frame adds 2 locking knobs, and the Otoolling kit includes hex head screws. Pins alone rely on a snug fit, so check that the halves close flat and the pins seat fully before packing sand. If the locating pins feel stiff, apply lubricant so the halves separate cleanly, as the BoldWay listing states. The Nelyrho frame pairs 4 pins with 2 locking knobs, and the Otoolling kit pairs 4 pins with hex head screws.

Sand in the box

Only the BoldWay bundle includes sand: 6 lb of natural casting sand at 400 mesh, with over 95% SiO2 content. The Nelyrho listing states casting sand is not included, and the other frames list no sand in the box. The bundle sand suits sand casting, precision casting and pressure casting, per the maker, and it can be reused for multiple castings. If the frame ships without sand, have sand on hand before the pour. The bundle sand is ultra-fine 400 mesh, and the maker states it for intricate jewelry casting.

Warranty

The two BoldWay frames carry a 5-year warranty, the longest term here. The besttruck frame and the Nelyrho frame each carry a 1-year warranty, and the Otoolling listing states no warranty term. A warranty term does not change how the frame casts, and it does not cover the sand, which is a consumable. Read the term before ordering, and keep the frame that gives 5 years when the choice is otherwise even.

Use as directed. Melt outdoors or with strong ventilation, and use dry tools and molds only. Wear a full face shield and leather PPE at the pour, and never melt unknown or sealed scrap. Keep the frame halves pinned and the work area clear of anything that can burn. See the Safety Disclaimer.

Before You Strike an Arc

Check these before the pour:

  • Check the pattern against the frame size: the Nelyrho interior is 3.9 x 2.7 x 2.8 inches, and the BoldWay frames are 6.35 x 3.82 x 2.36 inches.
  • Leave room for casting sand and pouring channels around the pattern.
  • Pack the sand level with the frame edge; the Nelyrho leveling plate scrapes excess sand flat.
  • If the locating pins feel stiff, apply lubricant so the halves separate cleanly.
  • On arrival, check the frame size against the listing: the BoldWay bundle and the Otoolling kit each state two sizes.

FAQ for welders

What size metal casting frame do I need?

Match the frame to the pattern, with room for sand and pouring channels. The Nelyrho interior is 3.9 x 2.7 x 2.8 inches, the BoldWay frames are 6.35 x 3.82 x 2.36 inches, the besttruck frame is 6.9 x 4.0 x 2.8 inches, and the Otoolling frame is about 10 x 10 x 2.5 inches. Larger patterns, such as knife pommels and guards, fit the Otoolling frame.

Do these frames come with casting sand?

Only the BoldWay bundle includes sand: 6 lb of natural casting sand at 400 mesh. The Nelyrho listing states casting sand is not included. The other frames list no sand in the box, so have sand on hand before the pour.

What metals can I cast with these frames?

The BoldWay frames suit gold, silver, copper and brass, and the bundle sand also suits zinc, aluminum and bronze. The Nelyrho frame suits gold, silver, copper and brass. The Otoolling frame suits gold, silver, copper and iron.

How long is the warranty on a metal casting frame?

The two BoldWay frames carry a 5-year warranty. The besttruck frame and the Nelyrho frame each carry a 1-year warranty. The Otoolling listing states no warranty term.

What holds the two halves of a casting frame together?

Four locating pins hold the halves on every frame here. The Nelyrho frame adds 2 locking knobs, and the Otoolling kit includes hex head screws. Pins keep the mold line lined up while the sand packs down.

Related: knife casting, best metal casting furnace, best sand for sand casting, best metal casting clay and sand casting vs investment casting.

More buying guides