Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Electric Furnace Crucible (2026): 4 Compared

Four graphite crucibles for electric furnaces compared on capacity, temperature limits, pouring design and warranty terms, with every figure from the listings.

Best Electric Furnace Crucible (2026): 4 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TOAUTO 2KG Graphite CrucibleBest OverallTOAUTO 2KG Graphite Crucible9.7/10View on Amazon
  2. 2Deruilong Graphite CrucibleBest for Jewelry MeltsDeruilong Graphite Crucible9.7/10View on Amazon
  3. 3Meinuo 1kg Graphite CrucibleMost Detailed DimensionsMeinuo 1kg Graphite Crucible9.6/10View on Amazon
  4. 4Nelyrho 1kg Graphite CrucibleThree Sizes ListedNelyrho 1kg Graphite Crucible9.5/10View on Amazon

A melt waits for no one, and the best electric furnace crucible is the pot that holds it without cracking, spilling or soaking up metal. We compared graphite crucibles for electric furnaces, looking at capacity, temperature limits, pouring design and warranty terms. The listings agree on graphite and disagree on little else, so the choice comes down to stated sizes, stated limits and what the maker puts behind the pot.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall TOAUTO 2KG Graphite Crucible: Three sizes with stated dimensions, 3200 °F and 5000 °F limits, plus a 1-year warranty Check price on Amazon
  • Best for Jewelry Melts Deruilong Graphite Crucible: Grooved flange for tongs, 3200 °F and 5000 °F limits and a 1 year warranty stated Check price on Amazon
  • Most Detailed Dimensions Meinuo 1kg Graphite Crucible: 130ml capacity with inner and outer diameters and height all stated Check price on Amazon
  • Three Sizes Listed Nelyrho 1kg Graphite Crucible: 1kg, 2kg and 3kg sizes with a smooth interior and non-stick bottom Check price on Amazon

The machines

TOAUTO 2KG Graphite Crucible for Metal Melting

TOAUTO 2KG Graphite Crucible for Metal Melting

TOAUTO9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2kg graphite crucible in a 1kg to 3kg range, with a grooved body, a glaze layer and a 1-year warranty.

Pros

  • Three sizes stated, 1kg, 2kg and 3kg, with diameter and height for each
  • Withstands 3200 °F in an air electric furnace and 5000 °F in vacuum or gas protection
  • Glaze layer and dense molding for corrosion resistance
  • 1-year warranty with lifetime technical support and a 30-day return stated

Cons

  • Not for carbon furnaces or charcoal kilns; it oxidizes and cracks
  • Oxidation starts at 752 °F in the wrong furnace
  • The 5000 °F limit needs a vacuum or gas protection furnace
  • The 2kg size is the middle option; small melts suit the 1kg size instead
Deruilong Graphite Crucible

Deruilong Graphite Crucible

Deruilong9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1kg graphite crucible with a grooved flange for tongs, rated for electric furnaces to 3200 °F in air.

Pros

  • Grooved flange design for handling with stainless steel tongs
  • Withstands up to 3200 °F in an air electric furnace and up to 5000 °F in vacuum or gas protection
  • Corrosion resistance with strong acid and alkali resistance stated
  • 1 year warranty stated

Cons

  • Not for carbon furnaces or charcoal kilns
  • Torch or open flame heating oxidizes and cracks it
  • The 5000 °F limit needs a vacuum or gas protection furnace
  • The listed size is 1kg; larger melts need the 2kg option
1kg High Purity Graphite Crucible for Melting

1kg High Purity Graphite Crucible for Melting

Meinuo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1kg graphite crucible holding about 130ml, with a grooved lip and stated inner and outer diameters.

Pros

  • Holds about 1kg, 130ml, with outer and inner diameters stated
  • Withstands up to 3200F in electric air furnaces and 5000F in vacuum or gas-protected environments
  • High-density, fine-grained graphite with extremely low ash content
  • Smooth inner wall for pouring with minimal residue

Cons

  • No warranty term is stated
  • Compatibility is stated for most furnaces, not all
  • The 5000F limit needs a vacuum or gas-protected environment
  • Small capacity suits small to medium melts only
Nelyrho 1kg Graphite Crucible for High Temperature

Nelyrho 1kg Graphite Crucible for High Temperature

Nelyrho9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1kg graphite crucible in three sizes, with a smooth interior and a non-stick bottom for clean pours.

Pros

  • Three sizes, 1kg, 2kg and 3kg, with dimensions for each
  • Smooth interior with a non-stick bottom for clean pours
  • Suits gold, silver, platinum and other precious metals and alloys
  • Outstanding resistance to thermal impact with material integrity stated

Cons

  • No warranty term is stated
  • No temperature limit is stated
  • Compatibility is stated for electric furnaces only
  • The listed size is 1kg; larger melts need the 2kg or 3kg options

Spec sheet comparison

Crucible Gear Score Capacity Top temperature Pouring Warranty
TOAUTO 2KG Graphite Crucible 9.7/10 1kg, 2kg, 3kg 3200 °F air, 5000 °F vacuum Grooved, glaze layer 1 year
Deruilong Graphite Crucible 9.7/10 1kg, 2kg 3200 °F air, 5000 °F vacuum Grooved flange 1 year
Meinuo 1kg Graphite Crucible 9.6/10 1kg, 130ml 3200F air, 5000F vacuum Smooth inner wall Not stated
Nelyrho 1kg Graphite Crucible 9.5/10 1kg, 2kg, 3kg Not stated Smooth interior Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026.

How to choose the best electric furnace crucible

Capacity and size

Capacity sets how much metal one heat holds. The TOAUTO and Nelyrho listings offer 1kg, 2kg and 3kg sizes, the Deruilong offers 1kg and 2kg, and the Meinuo is a 1kg crucible holding about 130ml. Sizes are stated in mixed units, so read them side by side: the Nelyrho 1kg measures 2.00 by 2.40 by 5.00 inches, the Meinuo 1kg measures about 2.56 inches across and 4.92 inches high, and the TOAUTO 2kg measures 72mm across and 155mm high. Match the crucible to the furnace chamber before you order, and to the pour size you actually run.

Temperature limits

Temperature limits are the number that matters most here, and three of the four listings state them. The TOAUTO, Deruilong and Meinuo listings state 3200 °F in an air electric furnace and 5000 °F in a vacuum or gas protection furnace, with the Meinuo written as 3200F and 5000F. The Nelyrho listing states no temperature limit, which is the thinnest spec sheet in this group. The TOAUTO listing also warns that graphite starts to oxidize at 752 °F, so the furnace type sets the real limit. For more on furnace choice, see our electric vs propane melting furnace guide.

Pouring design

Pouring is where a crucible earns its keep. The Deruilong has a grooved flange designed for handling with stainless steel tongs, and the TOAUTO body is grooved for easy removal from the furnace. The Meinuo has a smooth inner wall for pouring with minimal residue, and the Nelyrho has a smooth interior with a non-stick bottom that prevents residue buildup. A grooved grip suits tongs, while a smooth bore suits a clean pour; pick the feature that matches how you lift and pour. See our graphite vs silicon carbide crucible comparison for the other crucible material.

Furnace type

Every crucible here is designed for an electric furnace, and the listings are blunt about the rest. The Deruilong and TOAUTO listings say graphite crucibles are not for carbon furnaces or charcoal kilns, and not for torch or open flame heating, because the crucible oxidizes and cracks. The 5000 °F limit on three listings needs a vacuum or gas protection furnace, not a plain air furnace. The Meinuo listing states compatibility with most electric melting furnaces and induction furnaces. If your furnace is not electric, these four are the wrong pots. See our best metal casting furnace guide for the furnace side.

Use as directed. Melt outdoors or with strong ventilation, use dry tools and molds only, wear a full face shield and leather PPE, and never melt unknown or sealed scrap. Never exceed the temperature limit the maker states for your furnace type. See the OSHA welding overview.

Before You Strike an Arc

  • Match the crucible to the furnace: every crucible here is designed for an electric furnace, and the TOAUTO and Deruilong limits assume an air electric furnace to 3200 °F.
  • Check the size against the furnace chamber: the Nelyrho 1kg measures 2.00 by 2.40 by 5.00 inches, and the Meinuo 1kg measures about 2.56 inches across and 4.92 inches high.
  • Have tongs ready: the Deruilong grooved flange is designed for handling with stainless steel tongs.
  • Check the warranty on arrival: the Deruilong and TOAUTO listings state a 1-year term.
  • Keep carbon furnaces, charcoal kilns, torches and open flames away from graphite crucibles; they oxidize and crack.

FAQ for welders

What temperature can these crucibles handle?

The TOAUTO, Deruilong and Meinuo listings state 3200 °F in an air electric furnace and 5000 °F in a vacuum or gas protection furnace. The Nelyrho listing states no temperature limit, so it ranks last on safety in this group.

Can I heat a graphite crucible with a torch?

No. The Deruilong and TOAUTO listings say graphite crucibles are not for torch or open flame heating, and not for carbon furnaces or charcoal kilns, because the crucible oxidizes and cracks. Use an electric furnace, and keep the heat inside the stated limit for your furnace type.

What sizes do these crucibles come in?

The TOAUTO and Nelyrho listings offer 1kg, 2kg and 3kg sizes, the Deruilong offers 1kg and 2kg, and the Meinuo is a 1kg crucible holding about 130ml. The TOAUTO 2kg measures 72mm across and 155mm high, and the Nelyrho 1kg measures 2.00 by 2.40 by 5.00 inches.

Which crucibles state a warranty?

The Deruilong states a 1 year warranty, and the TOAUTO states a 1-year warranty with lifetime technical support and a 30-day return. The Nelyrho and Meinuo listings state no warranty term.

What metals can I melt in these crucibles?

The listings name gold, silver and copper across the four, with the Nelyrho adding platinum and other precious metals and alloys, the TOAUTO adding brass and aluminum, and the Meinuo adding brass and aluminum. All four are graphite crucibles for electric furnaces, so match the metal to the furnace you own.

Related: graphite vs silicon carbide crucible, best metal casting furnace, electric vs propane melting furnace, and the knife casting hub. Also see our best gold melting furnace. Also see our best ingot mold kit. Also see our best sand for sand casting. Also see our graphite vs clay crucible.

Scoring, line by line

The Gear Score weighs performance, build, value, safety and warranty, with the weights published on our How We Pick page. For a crucible, safety means stated temperature limits, thermal shock and corrosion resistance the listing actually states; a crucible that states no temperature limit scores lower on that line, whatever its sizes. Two of the four crucibles state a warranty term, and none states a safety certification.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TOAUTO 2KG Graphite Crucible 9.7 32 22 21 8 2
Deruilong Graphite Crucible 9.7 30 21 21 7 2
Meinuo 1kg Graphite Crucible 9.6 29 21 20 7 0
Nelyrho 1kg Graphite Crucible 9.5 28 20 20 5 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides