Best Cordless Metal Shears (2026): 5 Picks for Sheet Metal
Cordless metal shears for sheet metal work, compared on cut capacity, torque, battery platform, head rotation and warranty, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSumumtor 800W9.7/10View on Amazon - 2
Thickest CutFledukten 400Nm9.5/10View on Amazon - 3
Best Brand ToolMilwaukee 2635-209.5/10View on Amazon - 4
Best Value Tool OnlyBDJHMP M189.4/10View on Amazon
A patch panel, a duct run or a strip of flashing all need the same thing: a clean, straight cut without a cord dragging across the shop floor. The best cordless metal shears cut sheet metal on battery power, with a head that turns so your wrist does not have to, and this guide scores them on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Sumumtor 800W: Two 4.0Ah batteries in the box, an 800W brushless motor at 2300 RPM, 300 Nm of torque and a 360 degree rotating head. Check price on Amazon
- Thickest Cut Fledukten 400Nm: Cuts up to 14GA stainless steel with 400 Nm of torque, a 360 degree rotating head, an LED light and IP54 housing. Check price on Amazon
- Best Brand Tool Milwaukee 2635-20: The only stated warranty here, 5 years, on an 18 gauge double cut shear from Milwaukee, at 3.93 lb. Check price on Amazon
- Best Value Tool Only BDJHMP M18: 400 Nm of torque and an 18GA cut for Milwaukee M18 18V batteries, with a 360 degree pivoting head and an LED light. Check price on Amazon
The machines

Cordless Metal Shears with 2×4.0Ah Battery
A brushless shear with two 4.0Ah batteries in the box, an 800W motor at 2300 RPM, and a 360 degree rotating head for cuts from any angle.
Pros
- Two 4.0Ah batteries, gloves, wrench, bolts and nuts in the box
- 800W brushless motor at 2300 RPM with 300 Nm of torque
- Cuts up to 20GA stainless steel and 18GA mild steel
- 360 degree rotating head, LED light, safety lock and forward and reverse rotation
Cons
- The 20GA stainless steel limit is thinner than the 14GA stainless steel cut of the Fledukten
- 300 Nm of torque is lower than the 400 Nm stated for the Fledukten and the BDJHMP
- No warranty term is stated
- The cutter head needs an Allen wrench to adjust

M18 18-Volt Lithium-Ion Cordless 18-Gauge Double
An 18 gauge double cut shear on the M18 18V platform, tool only, with a 5 year tool warranty and a stated weight of 3.93 lb.
Pros
- 5 year tool warranty, the only stated warranty here
- 18 gauge double cut shear on the M18 18V lithium-ion platform
- Stated weight of 3.93 lb, lighter than the 4.2 lb 2637-20
- Shares M18 18V batteries with the 2637-20
Cons
- Tool only, no battery or charger in the box
- The 18 gauge cut is thinner than the 14GA stainless steel cut of the Fledukten
- No LED work light, so the cut line is harder to see in dim corners
- At 14.2 inches long, it needs room to turn in tight spaces

Cordless Metal Shears Compatible with DeWalt 20V
A brushless shear for DeWalt 20V Max batteries that cuts up to 14GA stainless steel, with a 360 degree rotating head, an LED light and IP54 housing.
Pros
- 400 Nm of torque from a brushless motor
- Cuts up to 14GA stainless steel, the thickest stated cut here
- 360 degree rotating head and LED light for work in tight, dim spaces
- Safety lock and IP54 housing for dusty shop conditions
Cons
- Tool only, no battery in the box
- No warranty term is stated
- Suits DeWalt 20V Max owners only; other battery platforms need a different pick
- Cuts up to 14GA stainless steel, so thicker plate still needs another tool

For Milwaukee M18 18V Battery Cordless Metal Shear
A brushless shear for Milwaukee M18 18V batteries with 400 Nm of torque, an 18GA cut, a 360 degree pivoting head and an LED light.
Pros
- 400 Nm of torque, 295 ft-lbs, for an 18GA cut
- Chromium-vanadium steel blades
- 360 degree pivoting head and LED light
- A left setting for fast, straight cuts and a right setting for fine, precise cuts
Cons
- Tool only, no battery or charger in the box
- Not suitable for corrugated metal sheets
- The 18GA cut is thinner than the 14GA stainless steel cut of the Fledukten
- Suits Milwaukee M18 18V owners only; other battery platforms need a different pick

Milwaukee 2637-20 M18 Cordless 18 Gauge Single Cut
An 18 gauge single cut shear on the M18 18V platform, bare tool, with a stated weight of 4.2 lb.
Pros
- 18 gauge single cut shear on the M18 18V platform
- The maker calls it easy to use, easy to handle and highly durable
- Bare tool, so M18 battery owners pay for the tool alone
- Stated weight of 4.2 lb in a 1.75 x 15.5 x 6.05 inch body
Cons
- Bare tool, no battery or charger in the box
- The 18 gauge cut is thinner than the 14GA stainless steel cut of the Fledukten
- At 4.2 lb, it is heavier than the 3.93 lb 2635-20
- At 15.5 inches long, it is the longest shear here
Other welders and gear to compare
WEN Metal ShearCheck price on Amazon
Genesis Electric Metal Cutting Shear 4 Amp 14-GaugeCheck price on Amazon
Sheet Metal Cutter for DrillCheck price on Amazon
VEVOR Sheet Metal BrakeCheck price on Amazon
Eastwood Electric Throatless Shear Variable Speed Metal ShearCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Max cut | Torque | Battery | Head | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| Sumumtor 800W | 9.7/10 | 20GA stainless, 18GA mild | 300 Nm | 2 x 4.0Ah included | 360° | Not stated | Not stated |
| Milwaukee 2635-20 | 9.5/10 | 18 gauge | Not stated | M18 18V, tool only | Not stated | 3.93 lb | 5 years |
| Fledukten 400Nm | 9.5/10 | 14GA stainless | 400 Nm | DeWalt 20V Max, tool only | 360° | Not stated | Not stated |
| BDJHMP M18 | 9.4/10 | 18GA | 400 Nm | Milwaukee M18 18V, tool only | 360° | Not stated | Not stated |
| Milwaukee 2637-20 | 9.4/10 | 18 gauge | Not stated | M18 18V, bare tool | Not stated | 4.2 lb | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (14 November 2026).
Buying guide: what matters in the best cordless metal shears
Cut capacity
Cut capacity is the main thing to check on a cordless metal shear. The picks here cut from 14GA stainless steel to 20GA stainless steel, with 18GA mild steel on the Sumumtor, so match the stated gauge to the sheet you cut most. A shear that states its limit by material, stainless steel or mild steel, gives a clearer answer than one that states a single gauge.
Torque and motor
Torque figures here run from 300 Nm to 400 Nm. The Fledukten and the BDJHMP state 400 Nm, while the Sumumtor states 300 Nm. The Sumumtor states an 800W brushless motor at 2300 RPM, while the Fledukten and the BDJHMP state brushless motors with no stated wattage. A higher stated torque suits thicker sheet, but the stated cut gauge is the figure that decides the job.
Battery platform
The Fledukten, the BDJHMP and the two Milwaukee shears are tool only, so the battery platform decides the buy: the Fledukten fits DeWalt 20V Max batteries, and the BDJHMP and the two Milwaukee shears fit Milwaukee M18 18V batteries. The Sumumtor is the only pick that brings batteries, two 4.0Ah packs in the box. Buy the shear that matches the batteries already on your shelf.
Head rotation and light
A rotating head turns the cut without turning the tool body, which helps on curves, corners and overhead work. The Fledukten, the BDJHMP and the Sumumtor all state a 360 degree head, and each of them also states an LED light for the cut line. The two Milwaukee shears state neither, so they suit straight cuts in good light.
What is in the box
The Sumumtor brings the full kit: shears, two 4.0Ah batteries, gloves, a wrench, bolts, nuts and a manual. The other picks bring the tool alone, so check your shelf for a charged battery and a charger before you cut.
Use as directed. Wear eye protection, clamp the sheet before you cut, keep hands clear of the blades, and engage the safety lock when the shear is not cutting. Never exceed the stated cut capacity. See the OSHA machine guarding page.
Before You Strike an Arc
- Fit a charged battery from the platform the shear is made for: DeWalt 20V Max for the Fledukten, Milwaukee M18 18V for the BDJHMP and the two Milwaukee shears; the Sumumtor brings two 4.0Ah batteries.
- Turn the head through its full range and check that the LED light marks the cut line before you cut.
- Check that the safety lock engages and that the blades are the stated alloy or chromium-vanadium steel.
- Clamp the sheet, mark the cut line, and keep hands clear of the blades.
- Check what is in the box on arrival: the Sumumtor should bring gloves, a wrench, bolts and nuts, while the tool-only shears bring the tool alone.
FAQ for welders
Can you sharpen metal shears?
The listings here do not state a sharpening method. The Fledukten and the Sumumtor state hardened alloy steel blades, and the BDJHMP states chromium-vanadium steel blades. If the edge dulls, check the manual that comes with the shear before you work on the blades.
How do you use DeWalt metal shears?
Fit a charged DeWalt 20V Max battery, DCB series, to a shear made for that platform, such as the Fledukten. Release the safety lock, set the 360 degree head to the angle of the cut, and let the LED light mark the cut line. Keep the sheet clamped and your hands clear of the blades.
What are metal shear blades made of?
The blades here are hardened alloy steel on the Fledukten and the Sumumtor, and chromium-vanadium steel on the BDJHMP. The two Milwaukee shears state no blade material. Blade material matters for edge life, so weigh it with the stated cut capacity when you choose.
What is a metal cutting shear?
A metal cutting shear is a power tool that cuts sheet metal and other thin materials on battery power. The cordless picks here cut from 14GA stainless steel to 20GA stainless steel, and they also cut iron, aluminum, PVC, carpet, leather and cardboard where the listing states it.
Related: sheet metal shears vs tin snips, best sheet metal shears for aluminum, best tin snips for sheet metal, nibbler vs snips for sheet metal, best sheet metal gauge thickness tool, sheet metal brake vs hand seamer, and the sheet metal tools hub. Also see our best sheet metal hammer. Also see our sheet metal tooling. Also see our best nibbler metal cutter.
Scoring, line by line
Each shear is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Cordless shears have no electrical safety listing to state, so the safety score here comes from stated safety features such as a safety lock, and the ranking comes from every criterion.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Sumumtor 800W | 9.7 | 32 | 22 | 22 | 5 | 0 |
| Milwaukee 2635-20 | 9.5 | 28 | 20 | 21 | 0 | 4 |
| Fledukten 400Nm | 9.5 | 32 | 21 | 20 | 5 | 0 |
| BDJHMP M18 | 9.4 | 29 | 20 | 19 | 0 | 0 |
| Milwaukee 2637-20 | 9.4 | 27 | 19 | 19 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




