MIG Welding Wire Types and Which to Buy
ER5356, ER4043 and ER70S-6 cover aluminum and mild steel MIG work: aluminum wire for aluminum alloys, mild steel wire for steel, matched by diameter and spool size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ARCCAPTAIN Magnesium Aluminum Welding Wire ER53569.6/10View on Amazon - 2
TOOLIOM ER4043 .030" Aluminum MIG Welding Wire9.6/10View on Amazon - 3
BIG RED Solid MIG Welding Wire9.6/10View on Amazon
A cracked aluminum bracket sits on the bench next to a steel gate frame, and each one needs a different wire. MIG welding wire types split by the metal they join: ER5356 and ER4043 aluminum wire for aluminum alloys, and ER70S-6 mild steel wire for steel. Match the wire to the base metal first, then the diameter to the machine and the job, and the spool size to how much welding you do.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | ARCCAPTAIN Magnesium Aluminum Welding Wire ER5356 | 9.6/10 | Buy on Amazon |
| 2 | TOOLIOM ER4043 .030" Aluminum MIG Welding Wire | 9.6/10 | Buy on Amazon |
| 3 | BIG RED Solid MIG Welding Wire | 9.6/10 | Buy on Amazon |

ARCCAPTAIN Magnesium Aluminum Welding Wire ER5356
A 0.035 in ER5356 aluminum wire with 5.0% magnesium, in a pack of 2 spools of 1 lb each, for 5xxx series aluminum-magnesium alloys.
Pros
- 5.0% magnesium for seawater and salt spray resistance
- Melting range 950 °F to 1175 °F stated
- Density 0.097 pounds per cubic inch stated
- Pack of 2 spools of 1 lb each
Cons
- No warranty term stated
- No safety certification stated
- Aluminum only, not for mild steel
- No spool material stated

TOOLIOM ER4043 .030" Aluminum MIG Welding Wire
A .030 in ER4043 aluminum wire with 5% silicon, on a 1 lb spool, for 3003, 3004, 5052, 6061 and 6063 alloys.
Pros
- 5% silicon for fluidity and a brighter finish
- Melting range 1065°F to 1170°F stated
- Density 0.097 lbs/in³ stated
- ABS plastic spool, durable and tough
Cons
- No warranty term stated
- No safety certification stated
- Aluminum only, not for mild steel
- Single 1 lb spool, no multi-pack

BIG RED Solid MIG Welding Wire
A 0.035 in ER70S-6 mild steel wire on an 11.0 pound spool, with low spatter for all-position gas welding.
Pros
- 11.0 pounds of wire on one spool
- Low spatter with a stable arc stated
- Suits welding in various positions
- Sturdy spools for storage and portability
Cons
- No warranty term stated
- No safety certification stated
- No melting range stated
- Mild steel only, not for aluminum
MIG welding wire types at a glance
The wires here cover aluminum and mild steel MIG jobs. ER5356 is an aluminum wire with 5.0% magnesium for 5xxx series alloys. ER4043 is an aluminum wire with 5% silicon for 3003, 3004, 5052, 6061 and 6063 alloys, plus casing alloys 43, 355, 356, and 214. ER70S-6 is a mild steel wire for steel in various positions. The aluminum wires come on 1 lb spools, while the steel wire comes on an 11.0 pound spool.
Side by side
| Gear Score | Diameter | Spool | |
|---|---|---|---|
| ARCCAPTAIN ER5356 | 9.6/10 | 0.035 in | 1 lb x 2 |
| TOOLIOM ER4043 | 9.6/10 | .030 in | 1 lb |
| BIG RED ER70S-6 | 9.6/10 | 0.035 in | 11.0 pounds |
Diameter and spool size are the other differences. The aluminum wires run at 0.035 in and .030 in, and the steel wire runs at 0.035 in. Check the diameter your machine feeds on the wire label and in the machine manual before you buy a spool.
ER5356 vs ER4043: which aluminum wire
The alloying element is the difference. ER5356 carries 5.0% magnesium and suits 5xxx series aluminum-magnesium alloys such as 5052, 5083, 5356, 5454 and 5456, especially base metals with high magnesium content. ER4043 carries 5% silicon, which the maker says enhances fluidity, and suits 3003, 3004, 5052, 6061 and 6063 alloys. ER5356 melts at 950 °F to 1175 °F, while ER4043 melts at 1065°F to 1170°F, and both list a density of 0.097. After anodizing, ER5356 leaves a white color and ER4043 leaves a gray color.
ER70S-6 for mild steel
Steel work takes a different wire. ER70S-6 is a solid mild steel wire, 0.035 in on an 11.0 pound spool, with low spatter and a stable arc for welding in various positions. The listing claims high deposition efficiency and continuous wire feeding, and the sturdy spools suit storage and portability. It is the wire here for metal fabrication, equipment customization, maintenance and upgrades.
MIG wire for the job
Each wire below handles one part of the work: the aluminum wires join aluminum alloys, and the steel wire joins mild steel. The cards carry the scores and the details.
These are scored on the Gear Score, which weighs performance, build, value, safety where it applies, and warranty. No safety listing is stated for any wire here, so no wire earns safety points.
Diameter and spool size
- Match the diameter to the machine. The wires here run at 0.035 in and .030 in. Check the diameter your machine feeds before you buy.
- Match the spool to the job. The aluminum wires come on 1 lb spools, the ARCCAPTAIN comes as a pack of 2, and the steel wire comes on an 11.0 pound spool.
- Check the alloy list. ER5356 names 5052, 5083, 5356, 5454 and 5456. ER4043 names 3003, 3004, 5052, 6061 and 6063, plus casing alloys 43, 355, 356, and 214.
- Check the finish. ER5356 leaves a white color after anodizing, and ER4043 leaves a gray color.
Aluminum and steel wire, fumes and fire. Welding makes fumes and hot spatter, and aluminum wire needs the same care as steel wire on ventilation and fire. Weld with good ventilation or outdoors with your head out of the plume, wear safety glasses under the helmet when chipping, and clear dry grass and anything flammable from the area. Secure gas cylinders upright with a chain.
FAQ for welders
What is the difference between ER5356 and ER4043 wire?
ER5356 carries 5.0% magnesium and suits 5xxx series alloys such as 5052, 5083, 5356, 5454 and 5456, with a white color after anodizing. ER4043 carries 5% silicon and suits 3003, 3004, 5052, 6061 and 6063 alloys, with a gray color after anodizing. ER5356 melts at 950 °F to 1175 °F and ER4043 at 1065°F to 1170°F, and both list a density of 0.097.
Can I weld aluminum with ER70S-6 wire?
No. ER70S-6 is a mild steel wire for steel, while aluminum needs ER5356 or ER4043 wire. Match the wire to the base metal first, and check the alloy list on the listing before you buy.
What diameter MIG wire should I use?
Use the diameter your machine feeds. The wires here run at 0.035 in and .030 in, so check the wire label and the machine manual for the diameter the machine takes, then match the spool to it.
What does the spool size tell me?
How much wire you get before the spool runs out. The aluminum wires here come on 1 lb spools, with the ARCCAPTAIN as a pack of 2, while the steel wire comes on an 11.0 pound spool. A larger spool suits more welding before a change.
Why does ER4043 leave a gray color after anodizing?
That is what its listing states: ER4043 leaves a gray color after anodizing, while ER5356 leaves a white color. If the finish matters to the job, check the color the listing states before you buy.
Related: best pulse MIG welder for aluminum, MIG welding wire size, MIG welder set up and the welding consumables hub.




