Best Welding Gloves for Overhead Stick (2026)
Four leather welding gloves for overhead stick welding, compared on leather cut, cuff length, heat shielding, Kevlar stitching, and stated warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCaiman 1878-5 21-Inch9.7/10View on Amazon - 2
Best Heat ShieldingBlack Stallion Revco 850L9.7/10View on Amazon - 3
Best Stated ThicknessQeeLink QLBR01 14-Inch9.6/10View on Amazon - 4
Cowhide PickLeaSeek Cowhide Stick9.4/10View on Amazon
When you are running a stick bead out of position overhead on heavy structural channel or an undercarriage frame, gravity works against you. Slag and molten spatter drop straight down onto your hands, wrists, and sleeves while radiant heat cooks the back of your gloves. Choosing the best welding gloves for overhead stick work comes down to heavy leather, heat-blocking liners, Kevlar seams, and extended cuff coverage that keeps sparks from rolling inside. This guide compares four pairs on what each listing states: leather type, sleeve length, heat shielding, weight, and stated warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Caiman 1878-5 21-Inch: Stated 21-inch length with elbow padding, American split deerskin, split cowhide heat shield patch, and ANSI/ISEA Heat Level 3 rating. Check price on Amazon
- Best Heat Shielding Black Stallion Revco 850L: Grain elkskin construction with DuPont Nomex lined back of hand to block radiant heat and spatter from overhead arcs. Check price on Amazon
- Best Stated Thickness QeeLink QLBR01 14-Inch: Stated 2.11 mm cowhide thickness, Kevlar stitching, reinforced palm and thumb, and a 3-month warranty term. Check price on Amazon
- Cowhide Pick LeaSeek Cowhide Stick: Cowhide leather construction with Kevlar stitching for MIG, Stick, and TIG welding. Check price on Amazon
The machines

Caiman Premium Split Deerskin MIG/Stick Welding
A 21-inch split deerskin glove with forearm and elbow padding, a split cowhide heat shield patch, and sock-lined fleece insulation.
Pros
- Stated 21-inch glove length provides extended forearm and elbow protection against falling spatter
- American split deerskin with split cowhide heat shield patch and padding
- Sock-lined cotton fleece and foam insulation for heat and cold protection
- Sewn with Kevlar thread, reinforced palm, and includes a 3-inch carabiner
Cons
- 30-day limited warranty is the shortest stated term in this guide
- Listed at 16 ounces

Revco 850L Flame Resistant Nomex Lined Elkskin
A grain elkskin stick glove with a flame-resistant DuPont Nomex lined back and Kevlar stitching.
Pros
- Grain elkskin leather blend stays flexible while insulating against high radiant arc heat
- DuPont Nomex lining on the back of the hand shields against falling sparks
- Sewn with heat-resistant Kevlar thread to prevent seam burnout
- Reversed grain palm improves grip feel and reinforced thumb strap strengthens high-wear area
Cons
- Warranty description in the listing states no warranty
- Exact glove length is not stated in the listing specs

QeeLink Welding Gloves for Men
A 14-inch cowhide leather glove with stated 2.11 mm thickness, Kevlar stitching, and a 3-month warranty.
Pros
- Listing specifies leather thickness at 2.11 millimeters
- 100% cowhide leather construction with reinforced palm and thumb
- Sewn with Kevlar thread to resist spark damage along seams
- 3-month manufacturer warranty stated in the listing
Cons
- 14-inch length provides less forearm coverage for overhead work than 21-inch designs
- Fabric weight class is categorized as lightweight on the listing

LeaSeek Leather Welding Gloves
A cowhide leather glove sewn with Kevlar thread, listed for stick, MIG, and forge work.
Pros
- Constructed from cowhide leather for heat and spark resistance
- Sewn with Kevlar thread to protect seams from spatter burn-through
- Multipurpose listing covers Stick, MIG, and TIG welding processes
- Reinforced leather construction intended for forge and shop use
Cons
- No warranty term is stated in the listing
- No specification table or technical data provided on the listing
- Glove length and cuff dimensions are not stated
- Lining material and leather thickness are not stated
Other welders and gear to compare
ARCCAPTAIN Soft Goat Grain TIG Welding GlovesCheck price on Amazon
RAPICCA MIG Welding Gloves for MenCheck price on Amazon
TOPDC Welding Gloves 16Inch 1000℉ Heat Resistant Leather forCheck price on Amazon
TOPDC 14Inch Welding Gloves 482°F Heat Resistant Leather forCheck price on Amazon
OZERO Welding Gloves: 932°F Heat Resistant GlovesCheck price on Amazon
vclpower Welding Gloves 16-Inch 932°F Heat Resistant LeatherCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Material | Length | Lining | Stitching | Special Protection | Warranty |
|---|---|---|---|---|---|---|---|
| Caiman 1878-5 21-Inch | 9.7/10 | Split deerskin, cowhide patch | 21 in | Cotton fleece and foam | Kevlar | Forearm padding, heat shield patch | 30 days |
| Black Stallion Revco 850L | 9.7/10 | 70% elkskin, 25% cowhide | Long sleeve | 5% Nomex (back) | Kevlar | Nomex back, reinforced thumb strap | None stated |
| QeeLink QLBR01 14-Inch | 9.6/10 | Cowhide leather (2.11 mm) | 14 in | Cotton | Kevlar | Reinforced palm and thumb | 3 months |
| LeaSeek Cowhide Stick | 9.4/10 | Cowhide leather | Not stated | Not stated | Kevlar | Not stated | None stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 14 October 2026.
Buying Guide: Best Welding Gloves for Overhead Stick
Sleeve length and cuff protection
Overhead stick welding drops hot slag directly onto your forearms. Standard welding gloves offer a 14-inch length, as seen on the QeeLink listing, which covers the wrist and lower forearm. The Caiman listing specifies an extended 21-inch length with forearm and elbow padding, closing the gap between your glove and jacket to prevent stray spatter from falling inside the cuff.
Leather selection for high heat
Different leathers handle heat and spatter differently. Heavy cowhide, like the 2.11 millimeter leather listed for the QeeLink, provides a durable barrier against abrasion and spatter. Black Stallion uses a grain elkskin blend with 70% elkskin and 25% cowhide, which stays soft and pliable under high arc heat. Caiman uses split deerskin backed by a split cowhide heat shield patch over high-exposure areas.
Back-of-hand shielding and linings
When holding a stick electrode holder overhead, radiant heat attacks the back of your hand. Black Stallion includes a DuPont Nomex liner behind the hand to resist heat and sparks. Caiman incorporates sock-lined cotton fleece and foam insulation alongside a split cowhide heat shield patch. Liners block radiant energy but can reduce finger feel, so check that your lining balances heat resistance with hand mobility.
Kevlar stitching and seam construction
Molten spatter quickly burns through regular cotton or nylon thread, causing glove seams to burst. Every glove listing in this guide states Kevlar stitching. Reinforced palm and thumb patches, noted on the QeeLink, Caiman, and Black Stallion listings, add leather thickness at high-stress wear points where the electrode holder sits.
Overhead welding safety
Overhead welding carries elevated risks of burns from falling slag and hot sparks. Always wear a flame-resistant welding jacket, leather sleeves, safety glasses under your hood, and leather gloves. Position your body to the side of the weld seam rather than directly underneath the puddle so dropping spatter falls past you. Inspect your gear before each shift. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Inspect the glove seams and Kevlar stitching on arrival for loose or skipped threads, especially along the thumb crotch and cuff seams.
- Check that your leather sleeves or welding jacket fit cleanly with the glove cuffs so falling spatter cannot roll into the opening.
- Confirm finger flexibility and grip with your electrode holder before striking an arc to ensure positive control over the rod.
- Verify that the back-of-hand heat shield or Nomex lining sits flat without pinching your knuckles when you close your fist.
FAQ for welders
Why do I need extended cuffs for overhead stick welding?
When you weld overhead, gravity pulls slag and molten sparks straight down toward your hands and arms. Standard short gloves leave your wrists and forearms exposed to burning spatter. Extended cuffs, like the 21-inch length stated on the Caiman pair, shield your arms up to the elbow and prevent slag from entering your sleeves.
What leather works best for stick welding gloves?
Cowhide, deerskin, and elkskin are common choices for stick welding. Cowhide offers thick, rugged protection against slag, while elkskin remains soft and flexible under high heat without stiffening. Deerskin provides supple flexibility and comfort, especially when paired with a cowhide heat shield patch for heavy spatter resistance.
Why is Kevlar thread necessary for overhead welding gloves?
Standard polyester or cotton sewing thread burns and melts quickly when hit by falling stick welding spatter. Kevlar thread resists heat and flame, holding the leather panels together even when sparks land on the seams. Every glove in this guide lists Kevlar stitching to prevent premature seam blowout.
Should welding gloves go over or under jacket sleeves?
When welding overhead, place your glove cuffs over your jacket sleeves if the cuff fits snugly and flares outward to deflect sparks away from your body. If the glove cuff is loose, tuck the cuff inside a tight leather jacket sleeve to prevent falling slag from rolling inside the glove opening. Check your fit-up before striking an arc.
How do I care for leather stick welding gloves?
Keep your leather welding gloves dry, as moisture degrades heat resistance and makes leather stiff when dried by arc heat. Brush off surface slag and metal dust after your welding session rather than washing them with harsh detergents. Store them flat in a cool, dry area away from direct sunlight.
Related: best stick welding gloves, best leather welding gloves, best welding gloves for high heat, and the welding safety gear hub. Also see our welding safety gear checklist for beginners. Also see our best stick welding helmet. Also see our best welding jacket for beginners. Also see our welding sleeves for men. Also see our best welding gloves for dexterity.
More related guides (11)
- best welding gloves for mig
- best welding gloves for men
- best material for welding gloves
- how to use stick welder
- how to strike an arc with a stick welder
- stick welder with hot start
- best boots for welding
- best welding respirator for under a helmet
- welding jacket with leather sleeves
- welding aprons for men
- best welding arm sleeves
Scoring, line by line
Each pair of gloves is scored on performance, build, value, safety listing, and warranty, using the scoring criteria published on our How We Pick page. Welding gloves in this comparison do not publish third-party safety certifications on their listings, so each pair scores zero on that criterion; final rankings reflect performance, build quality, value, and stated warranty terms.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Caiman 1878-5 21-Inch | 9.7 | 32 | 22 | 21 | n/a | 2 |
| Black Stallion Revco 850L | 9.7 | 30 | 24 | 21 | n/a | 0 |
| QeeLink QLBR01 14-Inch | 9.6 | 26 | 20 | 21 | n/a | 2 |
| LeaSeek Cowhide Stick | 9.4 | 21 | 18 | 19 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




