Best TIG Rod for Thin Sheet Metal (2026): 5 Picks Scored
Five TIG filler rods for thin sheet metal, scored on arc quality, build, value and warranty, from what each Amazon listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWeldingCity ER70S-2 1/16 36 in9.7/10View on Amazon - 2
Best for Sheet MetalSÜA ERCuSi-A 1/16 in 36 in9.6/10View on Amazon - 3
Best WarrantySONNLER ER70S-6 3/32 16 in9.5/10View on Amazon - 4
Best for Rusty PlateYESWELDER ER70S-6 1/16 16 in9.5/10View on Amazon
Thin sheet metal punishes the wrong filler rod: too much heat and the panel warps, too little and the bead never wets in. This guide scores the best tig rod for thin sheet metal across five listings, on what each listing states: arc quality, build, value, safety listing and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall WeldingCity ER70S-2 1/16 36 in: WeldingCity ER70S-2 1/16 in rod; triple deoxidized, lists sheet metal as an application. Check price on Amazon
- Best for Sheet Metal SÜA ERCuSi-A 1/16 in 36 in: SUA silicon bronze 1/16 in 36 in rod, stated for plain and galvanized sheet metal. Check price on Amazon
- Best Warranty SONNLER ER70S-6 3/32 16 in: SONNLER ER70S-6 3/32 in 16 in with a stated 2 year warranty. Check price on Amazon
- Best for Rusty Plate YESWELDER ER70S-6 1/16 16 in: YESWELDER ER70S-6 1/16 in 16 in 5 lb box, stated for rusty, oily or poor fit-up plate. Check price on Amazon
The machines

WeldingCity 5-Lb ER70S-2 Mild Carbon Steel TIG
A 1/16 in ER70S-2 TIG rod in 36 in lengths, triple deoxidized and explicitly listed for sheet metal work.
Pros
- Triple deoxidized ER70S-2, stated to conform to AWS A5.18
- Lists sheet metal applications outright
- 1/16 in diameter in 36 in lengths, all position
- 5 lb and 10 lb package options
Cons
- No warranty term is stated
- Four diameters share one listing, so check the size you select
- No tensile strength figure in the listing
- 36 in rods are awkward to store in a small shop

SÜA - ERCuSi-A Silicon Bronze TIG Welding Rod
A 1/16 in silicon bronze TIG rod in 36 in lengths, stated for plain and galvanized steel sheet metal.
Pros
- Stated for plain and galvanized steel sheet metal
- 3% silicon bronze, 51,000 psi tensile stated
- 36 in length, 1/16 in diameter
- 1, 2, 5 and 10 lb package options
Cons
- No warranty term is stated
- Main image is for reference only per the listing
- Only 1/16 in diameter offered
- Welding galvanized steel needs fume ventilation

ER70S-6 3/32" x 16" 5LB Mild Steel TIG Welding
A 3/32 in ER70S-6 TIG rod in 16 in lengths with waterproof packaging and a stated 2 year warranty.
Pros
- ER70S-6 rod with waterproof, reusable packaging
- Stated 2 year warranty plus 30 day free return
- 1/16, 3/32 and 1/8 in diameters listed
- Smooth bead with little to zero cleanup per the listing
Cons
- Title size is 3/32 in, the thickest here for thin sheet
- Gas guidance centers on CO2 rather than argon
- Application list leans industrial, not home shop

YESWELDER TIG Welding Rod Mild Steel ER70S-6
A 1/16 in ER70S-6 TIG rod in 16 in lengths, copper coated, suited to poor fit-up and rusty plate.
Pros
- ER70S-6 with the highest Mn and Si deoxidizers per the listing
- Stated for 100% argon with little to zero post-weld cleanup
- Suited to poor fit-up and rusty, oily plates
- 1/16, 3/32 and 1/8 in diameters in the listing
Cons
- No warranty term is stated
- 16 in length only, no 36 in option
- Two package kinds in stock with the same rods inside
- 5 lb box is a lot for occasional sheet work

UNIFAMILY 50pcs Stainless Steel TIG Welding Rod
A 1/16 in ER308L stainless TIG rod in a 1 lb, 50 piece pack, with a 90 day warranty stated.
Pros
- 1/16 in stainless ER308L rod, 16 in length
- 90 day manufacturer warranty stated
- 50 piece, 1 lb pack suits small jobs
- Lists sheet metal and small tube applications
Cons
- Bullets say it welds mild and low alloy steels, odd for a stainless rod
- Length stated as both 16 in and 15.75 in
- 1 lb pack runs out fast on bigger work
Other welders and gear to compare
SS TIGCheck price on Amazon
ER70S-6 TIG Welding Rod 1/16" x 16"Check price on Amazon
YESWELDER TIG Tungsten Electrode Pre-Sharpened WeldingCheck price on Amazon
YESWELDER TIG Welding Rod Mild Steel ER70S-6 1/8"x16" 5LB gasCheck price on Amazon
YESWELDER TIG Welding Rod Mild Steel ER70S-6 3/32"x16" 5LBCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Alloy | Diameter | Length | Pack | Warranty |
|---|---|---|---|---|---|---|
| WeldingCity ER70S-2 1/16 36 in | 9.7/10 | ER70S-2 mild steel | 1/16 in | 36 in | 5 lb | None stated |
| SÜA ERCuSi-A 1/16 in 36 in | 9.6/10 | ERCuSi-A silicon bronze | 1/16 in | 36 in | 2 lb | None stated |
| SONNLER ER70S-6 3/32 16 in | 9.5/10 | ER70S-6 mild steel | 3/32 in | 16 in | 5 lb | 2 years |
| YESWELDER ER70S-6 1/16 16 in | 9.5/10 | ER70S-6 mild steel | 1/16 in | 16 in | 5 lb | None stated |
| UNIFAMILY ER308L 1/16 16 in | 9.5/10 | ER308L stainless | 1/16 in | 16 in | 1 lb | 90 days |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 October 2026.
Buying guide: what matters in the best tig rod for thin sheet metal
Rod diameter
Four of the five listings offer 1/16 in, the thin sheet choice here. WeldingCity also lists 0.045 in for even thinner work, while the SONNLER title is 3/32 in, which suits thicker sections better. Match the diameter to the metal: thin rod, thin sheet.
Rod length: 16 in vs 36 in
The YESWELDER, SONNLER and UNIFAMILY rods come in 16 in lengths, while the WeldingCity and SÜA rods are 36 in. Longer rods mean fewer stops to feed wire, but 36 in rods need straight, dry storage and can kink in shipping. Pick the length your storage space handles.
ER70S-2 vs ER70S-6
Three of the five rods are ER70S mild steel. The WeldingCity ER70S-2 is triple deoxidized and states conformance to AWS A5.18. The YESWELDER and SONNLER ER70S-6 rods claim the highest manganese and silicon deoxidizers, which the listings say handle rusty or oily plate better. For the full breakdown, read ER70S-6 vs ER70S-2 TIG rod.
Silicon bronze for sheet metal
The SÜA rod is ERCuSi-A silicon bronze with 3% silicon and a stated 51,000 psi tensile strength. Its listing says it is best known for welding plain or galvanized steel sheet metal for cabinets, furniture and ductwork. If your sheet work includes galvanized panels, this is the only listing that names that use.
Shielding gas
Gas is stated per listing: YESWELDER names 100% argon, WeldingCity and UNIFAMILY name an argon and CO2 mix, and SONNLER centers on CO2 while noting more argon means a smoother bead. Run what the rod listing states. For background on gas choice, see argon vs helium for TIG welding.
Galvanized steel and ventilation
Welding galvanized steel gives off fumes you do not want to breathe. The SÜA listing names galvanized sheet metal as a use, so treat ventilation as part of the setup: work with air moving across the weld and keep your head out of the plume.
Use as directed. Keep the weld area clear of anything that can burn, since grinding sparks and hot metal travel. Check cables and the torch before you weld, keep the work dry, and never exceed the amperage your machine and leads are rated for.
Before You Strike an Arc
- Match the rod to the metal: ER70S-2 or ER70S-6 for mild steel, silicon bronze for the sheet applications the SÜA listing names.
- Set the gas per the listing: 100% argon for the YESWELDER rod, an argon and CO2 mix for the WeldingCity and UNIFAMILY rods.
- Check the rods on arrival: they should be straight, clean and dry, with no kinks from shipping.
- Ventilate, especially with galvanized or oily plate; the YESWELDER listing names rusty, oily plates as an application.
- Store filler rods dry; the SONNLER reusable waterproof packaging is made for exactly that.
FAQ for welders
What TIG rod do I use for thin sheet metal?
Start with 1/16 in: four of the five listings here offer it. The WeldingCity ER70S-2 lists sheet metal applications outright, and the SÜA silicon bronze listing names plain and galvanized sheet metal. Pick the alloy that matches your metal.
What is the difference between ER70S-2 and ER70S-6?
Both are mild steel TIG fillers. The WeldingCity ER70S-2 is triple deoxidized and states AWS A5.18 conformance; the ER70S-6 listings claim the highest manganese and silicon deoxidizers for dirtier plate. Our buying guide above links the full ER70S-6 vs ER70S-2 comparison.
Can I TIG weld galvanized sheet metal?
The SÜA silicon bronze listing names galvanized steel sheet metal as a use. Ventilate well and keep your head out of the fumes, which are the real hazard with galvanized work.
What shielding gas should I use for TIG on mild steel?
Follow the rod listing: 100% argon for the YESWELDER ER70S-6, an argon and CO2 mix for the WeldingCity ER70S-2 and the UNIFAMILY rod. Do not swap gases on a guess.
Do any of these TIG rods come with a warranty?
Two do. SONNLER states a free warranty within 2 years plus 30 day free return and exchange, and UNIFAMILY states a 90 day manufacturer warranty. The other three listings state no warranty term.
Related: TIG welding settings for sheet metal and the welding consumables hub.
Scoring, line by line
Each rod is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of these listings states a safety certification, so every rod here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| WeldingCity ER70S-2 1/16 36 in | 9.7 | 32 | 22 | 22 | n/a | 0 |
| SÜA ERCuSi-A 1/16 in 36 in | 9.6 | 30 | 21 | 21 | n/a | 0 |
| SONNLER ER70S-6 3/32 16 in | 9.5 | 23 | 20 | 18 | n/a | 3 |
| YESWELDER ER70S-6 1/16 16 in | 9.5 | 29 | 21 | 20 | n/a | 0 |
| UNIFAMILY ER308L 1/16 16 in | 9.5 | 24 | 19 | 18 | n/a | 2 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.





