Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Pipe Reamer for Copper (2026): 5 Compared

Five inner and outer pipe reamers for copper tube, compared on stated size range, cutting edges, body material, weight and warranty.

Best Pipe Reamer for Copper (2026): 5 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RIDGID 227S ReamerBest OverallRIDGID 227S Reamer9.7/10View on Amazon
  2. 2DURATECH Large ReamerWidest Size RangeDURATECH Large Reamer9.7/10View on Amazon
  3. 3WISSCOOL 4-Blade ReamerCompact PickWISSCOOL 4-Blade Reamer9.6/10View on Amazon
  4. 4MERWOF Pipe ReamerAluminum Housing PickMERWOF Pipe Reamer9.6/10View on Amazon
  5. 5ROGVOC Pipe ReamerSmall Tube PickROGVOC Pipe Reamer9.5/10View on Amazon

A fresh cut on copper tube leaves a raised burr on the inside edge and a sharp lip on the outside, and neither one lets a fitting seat clean. The best pipe reamer for copper clears both edges with a twist of the wrist, so the joint goes together the way it should. The reamers below are compared on stated size range, cutting edges, body material and weight, from what each maker publishes.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall RIDGID 227S Reamer: 45 cutting edges, 1/2 to 2 inch range and a lifetime warranty Check price on Amazon
  • Widest Size Range DURATECH Large Reamer: 15/32 to 2-1/8 inch with a Cr-Mo cone and 40 cutting edges Check price on Amazon
  • Compact Pick WISSCOOL 4-Blade Reamer: 1/4 to 1-5/8 inch, 2 inch diameter and a green anti-slip handle Check price on Amazon
  • Aluminum Housing Pick MERWOF Pipe Reamer: Aluminum alloy housing at a stated 6 oz, 1/4 to 1-5/8 inch Check price on Amazon
  • Small Tube Pick ROGVOC Pipe Reamer: 1/4 to 1-1/4 inch compact reamer with 40 stainless steel reamers Check price on Amazon

The machines

Ridgid 29993 227S Stainless Steel Pipe Reamer

Ridgid 29993 227S Stainless Steel Pipe Reamer

RIDGID9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hardened steel inner and outer reamer for 1/2 to 2 inch tube, with 45 cutting edges and a lifetime warranty.

Pros

  • 45 cutting edges on the interior cone, the highest count here
  • Lifetime warranty against defects in material or workmanship
  • Dual inch and metric measurement bar stated
  • Hardened steel construction stated by the maker

Cons

  • Range starts at 1/2 inch, so smaller tube is out of reach
  • Stated materials stop at stainless steel and copper tubing
  • No grip material or knurling is stated
  • Tool dimensions are stated as a cube, hard to picture in a toolbox
DURATECH Inner & Outer Tubing Reamer, Large

DURATECH Inner & Outer Tubing Reamer, Large

DURATECH9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A large inner and outer reamer for 15/32 to 2-1/8 inch tube, with a Cr-Mo steel cone and 40 cutting edges.

Pros

  • Widest stated range here, 15/32 to 2-1/8 inch
  • Cr-Mo steel cutting cone with black oxide finish
  • 40 cutting edges on the steel cone
  • Knurled aluminum body for grip in wet or oily conditions

Cons

  • Range starts at 15/32 inch, so the smallest tube is out of reach
  • No warranty term is stated
  • Weight and tool dimensions are not stated
  • Large size may crowd a small toolbox
WISSCOOL Inner/Outer Pipe Reamer, 1/4 to 1-5/8"

WISSCOOL Inner/Outer Pipe Reamer, 1/4 to 1-5/8"

Wisscool9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact inner and outer reamer for 1/4 to 1-5/8 inch tube, with 4 blades and a green anti-slip handle.

Pros

  • Covers 1/4 to 1-5/8 inch tube, including small sizes
  • Hardened steel blades and 4 stainless steel reamers stated
  • Green anti-slip handle with knurled edges
  • Stated size of 2 inches diameter and 2.36 inches height

Cons

  • Only 4 cutting edges, below the 40 and 45 edge picks
  • Range stops at 1-5/8 inch, short of the large picks
  • No warranty term is stated
  • Stainless steel tube work is not stated
Pipe Reamer, Inner/Outer Pipe Deburring Tool

Pipe Reamer, Inner/Outer Pipe Deburring Tool

MERWOF9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An aluminum alloy inner and outer reamer for 1/4 to 1-5/8 inch tube, with 4 stainless steel reamers.

Pros

  • Covers 1/4 to 1-5/8 inch tube, including small sizes
  • Aluminum alloy housing with a non-slip design
  • 4 sharp stainless steel reamers stated
  • Stated weight of 6 oz for toolbox carry

Cons

  • Only 4 cutting edges, below the 40 and 45 edge picks
  • Range stops at 1-5/8 inch, short of the large picks
  • Brass and stainless tube work are not stated
  • Green coating is the only finish detail stated
ROGVOC Pipe Reamer Tool, Hvac Deburring Tool

ROGVOC Pipe Reamer Tool, Hvac Deburring Tool

Rogvoc9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact inner and outer reamer for 1/4 to 1-1/4 inch tube, with 40 stainless steel reamers and an aluminum alloy body.

Pros

  • 40 stainless steel reamers stated
  • Thickened aluminum alloy body with anti-slip coating
  • Compact design stated for cramped areas and tight spaces
  • Covers 1/4 inch tube at the small end

Cons

  • Narrowest range here, stopping at 1-1/4 inch
  • Weight and tool dimensions are not stated
  • Brass and stainless tube work are not stated
  • Red finish only, no grip knurling stated

Spec sheet comparison

Reamer Gear Score Size range Cutting edges Body Weight Warranty
RIDGID 227S Reamer 9.7/10 1/2 to 2 in 45 Hardened steel 0.22 pounds Lifetime
DURATECH Large Reamer 9.7/10 15/32 to 2-1/8 in 40 Aluminum body, Cr-Mo cone Not stated Not stated
WISSCOOL 4-Blade Reamer 9.6/10 1/4 to 1-5/8 in 4 Green anti-slip handle Less than 0.38 Lbs Not stated
MERWOF Pipe Reamer 9.6/10 1/4 to 1-5/8 in 4 Aluminum alloy housing 6 oz Not stated
ROGVOC Pipe Reamer 9.5/10 1/4 to 1-1/4 in 40 Aluminum alloy body Not stated Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026.

Buying guide: what matters in the best pipe reamer for copper

Size range comes first

A reamer only works on tube inside its stated range, so match the range to the tube on your bench. The DURATECH Large covers 15/32 to 2-1/8 inch outside diameter, the widest span here. The RIDGID 227S covers 1/2 to 2 inch, stated as 12 mm to 50 mm. The WISSCOOL and MERWOF reamers each cover 1/4 to 1-5/8 inch, and the ROGVOC covers 1/4 to 1-1/4 inch. If your work runs to small tube in tight spots, a compact range is fine. If you cut larger tube, check the top of the range before you buy. For the cut itself, see our best pipe cutter with reamer guide.

Inner and outer edges

Every reamer here works on both sides of the tube end. The cone goes into the tube to clear the inner burr, and the outer side of the cone chamfers the outside edge. The DURATECH instructions state it plainly: insert the tip of the cone into the pipe and rotate until the opening is smooth, then use the opposite side of the cone on the outer edge. The RIDGID 227S states inner reaming plus outer deburring and beveling. The WISSCOOL, MERWOF and ROGVOC reamers each state inner and outer work as well. A clean chamfer helps the tube enter a fitting without shaving the edge.

Cutting edges and cone material

Edge count and cone material differ across these picks. The RIDGID 227S states 45 cutting edges on the interior cone in hardened steel. The DURATECH states 40 cutting edges on a Cr-Mo steel cone with a black oxide finish. The ROGVOC states 40 stainless steel reamers. The WISSCOOL and MERWOF reamers each state 4 stainless steel reamers, and the WISSCOOL also states hardened steel blades. More edges spread the work around the cone, while fewer blades put the work on each blade. Either way, keep the cone clean and dry between jobs so the edges stay keen. Our types of deburring tools guide explains where cone reamers sit among deburring tools.

Body, grip and weight

These are hand tools, so grip matters when the tube is wet or oily. The DURATECH uses a knurled aluminum body. The MERWOF uses an aluminum alloy housing with a non-slip design, and the ROGVOC uses a thickened aluminum alloy body with an anti-slip coating. The WISSCOOL uses a green anti-slip handle with knurled edges. Stated weights are light: the MERWOF is stated at 6 oz, the WISSCOOL at less than 0.38 Lbs, and the RIDGID 227S at 0.22 pounds. The DURATECH and ROGVOC do not state a weight. Size is stated for two picks: the WISSCOOL and MERWOF each measure 2 inches in diameter and 2.36 inches in height, small enough for a toolbox corner.

Copper and the other tube materials

All five reamers state copper work. Beyond copper, the stated materials differ. The WISSCOOL states copper, PVC, PPR, brass, aluminum and metal pipes. The DURATECH states copper, stainless steel, PVC, brass and aluminum. The MERWOF states copper, aluminum, PVC and PPR. The ROGVOC states PVC, copper, aluminum and PPR. The RIDGID 227S states stainless steel and copper tubing. If your bench sees stainless tube as well as copper, the DURATECH and RIDGID picks state that work. For bending the tube after the cut, see our best tube bender for copper pipe guide.

Use as directed. Reamer cones are sharp on every edge. Keep fingers off the cutting edges, turn the tool rather than forcing it, and clear metal chips from the cone before the next tube. Eye protection suits any work that throws small metal chips. See our Safety Disclaimer.

Before You Strike an Arc

  • Check the tube outside diameter against the stated range of your reamer before you cut.
  • Clear the inner burr with the cone tip, then chamfer the outer edge with the opposite side of the cone.
  • Wipe chips off the cone and check the edges when the tool arrives and after hard use.
  • Seat the tube in the fitting dry and confirm the edge enters clean before you join the joint.

FAQ for welders

What size pipe reamer do I need for copper tube?

Match the stated range to your tube outside diameter. The WISSCOOL and MERWOF reamers cover 1/4 to 1-5/8 inch, the ROGVOC covers 1/4 to 1-1/4 inch, the RIDGID 227S covers 1/2 to 2 inch, and the DURATECH Large covers 15/32 to 2-1/8 inch.

Does a pipe reamer work on both the inside and outside?

Yes, on every pick here. The cone tip clears the inner burr, and the outer side of the cone chamfers the outside edge. The DURATECH states that method in its instructions, and the RIDGID 227S states inner reaming with outer deburring and beveling.

Which reamer here covers the widest size range?

The DURATECH Large states 15/32 to 2-1/8 inch outside diameter, the widest span in this guide. The RIDGID 227S states 1/2 to 2 inch, or 12 mm to 50 mm, with a dual inch and metric measurement bar.

Can these reamers handle stainless steel tube?

Two picks state stainless work. The DURATECH states copper, stainless steel, PVC, brass and aluminum, and the RIDGID 227S states stainless steel and copper tubing. The other picks state copper with PVC, PPR, brass or aluminum, depending on the model.

Which pipe reamer here states a warranty?

Only the RIDGID 227S states a warranty term: a lifetime warranty against defects in material or workmanship for the life of the tool. The other four reamers state no warranty term.

Related: best copper deburring tool, deburring tool vs reaming pen, best hand tubing cutter, and the tube tools hub. Also see our best rolling flaring tool. Also see our best brazing rods for copper pipe and the sheet metal and tube hub.

Scoring, line by line

Each reamer is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Hand reamers state no electrical safety listing, so every reamer here scores zero on that criterion. Only the RIDGID 227S states a warranty term, a lifetime warranty against defects in material or workmanship. The ranking comes from size range, cutting edges, body build and that warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
RIDGID 227S Reamer 9.7 30 22 20 n/a 4
DURATECH Large Reamer 9.7 30 22 21 n/a 0
WISSCOOL 4-Blade Reamer 9.6 28 20 21 n/a 0
MERWOF Pipe Reamer 9.6 28 20 20 n/a 0
ROGVOC Pipe Reamer 9.5 27 20 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides

Metal Fab Tools ·

Best Abrasive Roll for Copper Pipe (2026)

5 abrasive rolls for copper pipe, in 80 to 240 grit, silicon carbide and aluminum oxide, mesh and fabric backed, compared by length, width…

Metal Fab Tools ·

Best Tube Bender for Copper Pipe (2026)

Three tube benders for copper pipe compared by size range, bend angle and dies, from a 180-degree ratchet kit to forward-reverse kits.