Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Pipe Reamer Tool (2026): 4 Picks for PVC and Conduit

Four pipe reamer tools for PVC pipe and metal conduit, compared on pipe sizes, drive type, blades and the warranty each listing states.

Best Pipe Reamer Tool (2026): 4 Picks for PVC and Conduit
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Klein 85091 Power ReamerBest OverallKlein 85091 Power Reamer9.7/10View on Amazon
  2. 2Klein 85191 Conduit ReamerBest Hand ReamerKlein 85191 Conduit Reamer9.6/10View on Amazon
  3. 3RESHARK 9-in-1 PVC ReamerMost Pipe SizesRESHARK 9-in-1 PVC Reamer9.6/10View on Amazon
  4. 4Coeweule Deburring ToolMost Spare BladesCoeweule Deburring Tool9.5/10View on Amazon

A fresh cut leaves a sharp lip inside the pipe, and that lip snags wire, blocks a fitting and leaves a joint that never quite seats. A pipe reamer tool takes that lip off and leaves a clean edge that a fitting can slide over. This guide looks at the best pipe reamer tool options for PVC pipe and metal conduit, and scores each on the sizes it covers, how it is driven, its blades and the warranty its listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Klein 85091 Power Reamer: Drill-driven reaming for 1/2, 3/4 and 1 inch conduit, plus bit storage, a No. 2 square bit and a replaceable blade. Check price on Amazon
  • Best Hand Reamer Klein 85191 Conduit Reamer: A screwdriver and conduit reamer in one, with a cushion grip, a hooded blade and a 1 year manufacturer warranty. Check price on Amazon
  • Most Pipe Sizes RESHARK 9-in-1 PVC Reamer: Nine sizes from 0.5 to 4 inches, an adjustable chamfer angle and a reversible hardened steel blade. Check price on Amazon
  • Most Spare Blades Coeweule Deburring Tool: A red handle with 15 spare high speed steel blades for metal, copper, aluminum and PVC. Check price on Amazon

The machines

Klein Tools 85091 Power Conduit Reamer

Klein Tools 85091 Power Conduit Reamer

KLEIN TOOLS9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A drill-driven conduit reamer for 1/2, 3/4 and 1 inch conduit, with bit storage, a No. 2 square bit and a replaceable blade.

Pros

  • Reams 1/2, 3/4 and 1 inch conduit from a power drill chuck
  • Holds 1/4-hex chicklet and impact-rated bits for fastening
  • Includes a No. 2 square recess bit for conduit fittings
  • Replaceable reaming blade included, with more available as Cat. No. 19353

Cons

  • Needs a drill or quick-release adapter; it is not a hand tool
  • Only reams conduit up to 1 inch
  • Not stated for PVC pipe; the listing names EMT conduit
  • No stated blade material
Klein Tools 85191 Thin-Wall Screwdriver/Conduit

Klein Tools 85191 Thin-Wall Screwdriver/Conduit

KLEIN TOOLS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A screwdriver and conduit reamer in one, with a hooded blade, cushion grip and a 1 year manufacturer warranty.

Pros

  • Reams 1/2, 3/4 and 1 inch thin-wall conduit
  • Hooded blade keeps the tip from slipping out of screws
  • Long cushion grip handle gives comfort and more torque
  • Made in USA with a 1 year manufacturer warranty

Cons

  • Hand driven, so slower than the drill-driven 85091
  • Only reams conduit up to 1 inch
  • Not stated for PVC pipe; the listing names EMT conduit
  • No bit storage like the 85091
9-in-1 PVC Pipe Deburring Tool

9-in-1 PVC Pipe Deburring Tool

RESHARK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9-in-1 chamfer tool for PVC pipe from 0.5 to 4 inches, with an adjustable cutting angle and a reversible hardened steel blade.

Pros

  • Covers nine pipe sizes from 0.5 to 4 inches
  • Adjustable cutting angle for light deburring or deep chamfering
  • One clockwise rotation makes a chamfer
  • Hardened steel blade with reversible and replaceable dual cutting edges

Cons

  • Made for plastic pipe only: PVC, CPVC, ABS, PP and PE
  • No warranty term is stated
  • Needs a 1/2 inch ratchet for larger pipes
  • No spare blade in the box
Coeweule Premium Deburring Tool with 15 Pcs High

Coeweule Premium Deburring Tool with 15 Pcs High

Coeweule9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hand deburring tool with 15 spare high speed steel blades for metal, copper, aluminum, PVC and more.

Pros

  • 15 spare high speed steel blades in the box
  • Blade rotates 360 degrees for round, curved and straight edges
  • Works on metal, steel, copper, aluminum, resin, PVC, plastic and wood
  • Spring clamping design swaps blades with a press of the bayonet

Cons

  • No warranty term is stated
  • Small at 3.9 x 2.0 x 0.5 inches, so it suits edges, not large pipe
  • No stated pipe sizes
  • Deburrs edges only; it does not chamfer pipe ends to a set angle

Spec sheet comparison

Model Gear Score Reams Drive Blades Warranty
Klein 85091 Power Reamer 9.7/10 1/2, 3/4, 1 in conduit Power drill Replaceable, 1 included 1 year
Klein 85191 Conduit Reamer 9.6/10 1/2, 3/4, 1 in conduit Hand Replaceable 1 year
RESHARK 9-in-1 PVC Reamer 9.6/10 0.5 to 4 in PVC pipe Hand, 1/2 in ratchet Reversible, replaceable Not stated
Coeweule Deburring Tool 9.5/10 Metal, PVC, copper, aluminum Hand 15 spare blades Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026.

Buying guide: choosing the best pipe reamer tool

Pipe sizes and materials

Match the reamer to the pipe you cut most. The RESHARK covers nine sizes, 0.5, 0.75, 1, 1.25, 1.5, 2, 2.5, 3 and 4 inches, and suits PVC, CPVC, ABS, PP and PE pipe. Both Klein tools ream 1/2, 3/4 and 1 inch thin-wall conduit, also called EMT, which is the metal conduit run in shops and buildings. The Coeweule tool states no pipe sizes; it deburrs edges on metal, steel, copper, aluminum, resin, PVC, plastic and wood. Pick the RESHARK for plastic pipe in many sizes, a Klein for metal conduit, and the Coeweule for general edge deburring across materials.

Hand driven or drill driven

Only the Klein 85091 runs in a power drill chuck or quick-release adapter, which makes it the quickest reamer here for repeated conduit work. The Klein 85191 is a hand tool with a long cushion grip handle for torque, and the RESHARK and Coeweule tools are hand driven too. The RESHARK adds a square pocket on the back that a 1/2 inch ratchet drives on larger pipes, which cuts the effort on big diameters. If you ream conduit all day, drill drive saves your wrist; for occasional joints, a hand tool is enough.

Blades and spares

Every reamer here has a replaceable blade, but the spares differ. The Coeweule set includes 15 spare high speed steel blades with its red handle, the most spares here. The Klein 85091 includes one replaceable reaming blade, with more available as Cat. No. 19353. The RESHARK blade has reversible and replaceable dual cutting edges, so you flip it when one edge dulls. The Klein 85191 blade is replaceable and held in place with a 1/16 inch hex socket set screw. Check what comes in the box before you order, and keep a spare blade where you can find it.

Warranty and origin

Both Klein tools state a 1 year manufacturer warranty and are made in the USA. The RESHARK and the Coeweule tool state no warranty term, so they score zero on warranty. A stated warranty does not change how a reamer cuts, but it tells you the maker stands behind the tool for a year. Weigh that against size range and spares when the choice is close.

Use as directed. Deburring throws small chips, so wear eye protection and keep fingers clear of the blade. Clamp the pipe or conduit before you ream so it cannot spin. Keep the blade covered in storage. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Match the reamer to the pipe before you cut: the Klein tools ream 1/2, 3/4 and 1 inch conduit, and the RESHARK covers 0.5 to 4 inch pipe.
  • Seat the blade before you start: the Klein 85091 blade is held by improved bit retention, and the 85191 blade by a 1/16 inch hex socket set screw.
  • Set the RESHARK chamfer angle for the joint, light deburring or deep chamfering.
  • Clamp the pipe or conduit before reaming so it cannot spin.
  • Check the box on arrival: the Coeweule set should hold a handle and 15 spare blades.

FAQ for welders

How do you use a pipe reamer?

Set the reamer on the cut end and turn it so the blade shaves the burr off the inside edge. The RESHARK makes a chamfer with one clockwise rotation, and the Klein 85091 fits a power drill chuck for faster work. The Klein 85191 and the Coeweule tool are hand driven, so you turn them by the handle.

What is a PVC pipe reamer?

It is a tool that chamfers the cut end of plastic pipe so a fitting slides on and solvent spreads evenly. The RESHARK covers PVC, CPVC, ABS, PP and PE pipe in nine sizes from 0.5 to 4 inches. Its adjustable cutting angle sets a light deburr or a deep chamfer.

What conduit sizes do the Klein reamers fit?

Both Klein reamers fit 1/2, 3/4 and 1 inch thin-wall conduit, also called EMT. The 85191 is a hand screwdriver and reamer, while the 85091 fits a power drill chuck. Both are made in the USA and carry a 1 year manufacturer warranty.

Which reamer here includes spare blades?

The Coeweule set includes 15 spare high speed steel blades with its red handle. The Klein 85091 includes one replaceable reaming blade, with more available as Cat. No. 19353. The RESHARK blade is reversible and replaceable, and the Klein 85191 blade is replaceable too.

Related: types of deburring tools, and the sheet metal and tube hub. Also see our best copper deburring tool. Also see our deburring tool vs reaming pen.

Scoring, line by line

Each tool is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Pipe reamers have no electrical safety listing to state, so every tool here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Klein 85091 Power Reamer 9.7 30 21 21 n/a 2
Klein 85191 Conduit Reamer 9.6 28 21 20 n/a 2
RESHARK 9-in-1 PVC Reamer 9.6 29 20 21 n/a 0
Coeweule Deburring Tool 9.5 28 19 20 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides