Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Deburring Tool vs Reaming Pen: Which One Should You Buy?

A drill-driven deburring tool and two hand reaming pens compared on blades, materials, drive and warranty, with a clear pick for each side.

Deburring Tool vs Reaming Pen: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1PLATINUMEDGE Deburring External Chamfer ToolPLATINUMEDGE Deburring External Chamfer Tool9.7/10View on Amazon
  2. 2For Milwaukee Tool 48-22-4255 Reaming PenFor Milwaukee Tool 48-22-4255 Reaming Pen9.6/10View on Amazon
  3. 3for Milwaukee Tool 48-22-4255 Reaming Penfor Milwaukee Tool 48-22-4255 Reaming Pen9.6/10View on Amazon

Verdict. Pick the deburring tool side when the burr is on the outside of a bolt, rod or pipe end and you have a drill on the bench. Pick a reaming pen when the burr is inside copper or PVC tube and you want a hand tool.

A burred bolt end stops a nut cold, and a burred copper tube end keeps a fitting from seating. The deburring tool vs reaming pen question comes down to where the burr sits: outside the stock or inside the tube. This comparison puts one deburring tool against two reaming pens.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The three tools

PLATINUMEDGE Deburring External Chamfer Tool

PLATINUMEDGE Deburring External Chamfer Tool

PLATINUMEDGE9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A drill-driven deburring tool with 3 carbide blades and a 1/4-inch hex shank for 1/8 to 3/4 inch stock.

Pros

  • 3 YG8 tungsten carbide blades for steel
  • Fits 1/8 to 3/4 inch stock, rod and screws
  • 1/4-inch hex shank for drills and impact drivers
  • Runs at 0 to 400 RPM

Cons

  • Needs a drill or impact driver
  • Fits 1/8 to 3/4 inch stock only
  • Drill speed capped at 400 RPM
  • Chamfers outside edges only, not inside a tube
For Milwaukee Tool 48-22-4255 Reaming Pen

For Milwaukee Tool 48-22-4255 Reaming Pen

Szbjliq9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hand reaming pen for copper and PVC with a heat-treated, black oxide coated blade, sized at 4.0 by 3.0 by 1.0 inches.

Pros

  • Heat-treated black oxide blade for longer life
  • All-metal construction for jobsite durability
  • Stated size at 4.0 by 3.0 by 1.0 inches
  • Made for the Milwaukee 48-22-4255 pen

Cons

  • Copper and PVC only
  • Hand-powered, with no drill drive
  • No pocket clip stated, unlike the YJNHE-FA pen
  • No warranty term is stated
for Milwaukee Tool 48-22-4255 Reaming Pen

for Milwaukee Tool 48-22-4255 Reaming Pen

YJNHE-FA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hand reaming pen for copper tubing and PVC pipes with a heat-treated black oxide blade and an anti-slip clip.

Pros

  • Heat-treated black oxide blade for longer life
  • All-metal construction for tough jobsite use
  • Anti-slip clip for pocket or tool bag carry
  • Made for the Milwaukee 48-22-4255 pen

Cons

  • Copper and PVC only
  • Hand-powered, with no drill drive
  • Reams inside tube only, not outside edges
  • No warranty term is stated

Side by side

PLATINUMEDGE Deburring Tool Szbjliq Reaming Pen YJNHE-FA Reaming Pen
Gear Score 61 58 57
Side Deburring tool Reaming pen Reaming pen
Fits 1/8 to 3/4 in (3 to 19 mm) Copper and PVC Copper tubing and PVC pipes
Blades 3 YG8 tungsten carbide Heat-treated, black oxide Heat-treated, black oxide
Shank / carry 1/4 in hex shank Not stated Anti-slip clip
Drive Drill, 0 to 400 RPM Hand Hand
Materials Steel, copper, brass, aluminum, wood, PVC Copper, PVC Copper, PVC
Weight 0.02 lb 0.15 lb Not stated
Size 3 x 11 x 3 cm 4.0 x 3.0 x 1.0 in Not stated
Warranty Not stated Not stated Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026. None of the three listings states a CSA, UL or ETL listing or a warranty term.

What each side does

The PLATINUMEDGE tool is an external chamfer tool. It shears the burred edge off a damaged bolt, threaded rod, screw or pipe end so a nut threads on smoothly. The two reaming pens remove burrs from the inside of copper tubing and PVC pipes. That split, outside edge or inside bore, is where the deburring tool vs reaming pen choice starts.

Blades and materials

The PLATINUMEDGE tool carries 3 YG8 tungsten carbide blades, and the maker lists stainless, hardened and mild steel, copper, brass, aluminum, fiberglass, wood and PVC. Both reaming pens carry a heat-treated, black oxide coated blade, listed for copper and PVC only. The carbide blades cover the widest material list here; see our types of deburring tools guide.

Drive and carry

The PLATINUMEDGE tool runs on a drill at 0 to 400 RPM through a 1/4-inch hex shank, fitting most drills and impact drivers. The reaming pens are hand tools: the YJNHE-FA pen has an anti-slip clip for pocket or tool bag carry, while the Szbjliq pen states no clip.

Weight and size

The Szbjliq pen states weight and size: 0.15 lb and 4.0 by 3.0 by 1.0 inches. The PLATINUMEDGE tool states weight and size as 0.02 lb and 3 by 11 by 3 cm, plus a fit range of 1/8 to 3/4 inch, or 3 to 19 mm. The YJNHE-FA pen states no weight or dimensions.

Warranty

None of the three listings states a warranty term, so the choice rests on the stated blades, materials and fit.

How to choose the deburring tool vs reaming pen

Outside edges go to the deburring tool; inside bores go to a reaming pen. Threaded rod and bolts go to the drill-driven tool; the pens are listed for copper and PVC tube.

Choose the deburring tool if

  • You clean up damaged bolts, rod and pipe ends with a drill.
  • You work stainless, hardened or mild steel, copper and brass.
  • You want a 1/4-inch hex shank for most drills and impact drivers.
  • You need to fit stock from 1/8 to 3/4 inch in one tool.

Choose a reaming pen if

  • You ream the inside of copper tubing and PVC pipes.
  • You want a pocket tool with no drill to carry.
  • You want an anti-slip clip, as the YJNHE-FA pen states.
  • You want the weight and size stated, as the Szbjliq pen does.

FAQ for welders

What is the difference between a deburring tool and a reaming pen?

A deburring tool like the PLATINUMEDGE chamfers the outside edge of bolts, threaded rod and pipe ends on a drill. A reaming pen removes burrs from the inside of copper tubing and PVC pipes by hand.

Can a reaming pen deburr steel pipe?

The two pens here are listed for copper and PVC only, with no steel use stated. The PLATINUMEDGE tool is the one listed for steel, including stainless, hardened and mild steel, among other materials.

What size stock does the PLATINUMEDGE deburring tool fit?

It fits 1/8 to 3/4 inch round stock, or 3 to 19 mm, including bar stock, threaded rod, screws and pipe, on a 1/4-inch quick-release hex shank at 0 to 400 RPM.

Which reaming pen should I buy?

Both pens are for the Milwaukee 48-22-4255, with the same blade and all-metal build. The Szbjliq states a weight of 0.15 lb and 4.0 by 3.0 by 1.0 inch dimensions; the YJNHE-FA states an anti-slip clip. Pick the clip for pocket carry; pick the Szbjliq for stated weight and size.

Related: best copper deburring tool, best tube cutter set under 40, best rotary file for metal, and the sheet metal and tubing hub.

Scoring, line by line

The three tools are scored on performance, build, value, safety listing and warranty, with the weights on our How We Pick page. No listing states a CSA, UL or ETL listing or a warranty term, so no safety or warranty points were given.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
PLATINUMEDGE Deburring Tool 9.7 30 22 21 n/a 0
Szbjliq Reaming Pen 9.6 28 21 21 n/a 0
YJNHE-FA Reaming Pen 9.6 28 21 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

Before you strike an arc. Wear eye protection, clamp the work, and keep gloves away from a spinning chamfer tool. Check the 1/4-inch hex shank seats in your drill before you pull the trigger, and check the reaming pen blade on arrival.

More buying guides