Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Sheet Metal Marker (2026): 5 Long Nib Picks for the Shop

Five long nib markers for sheet metal layout, compared on nib reach, pack size, colors, ink and the extras each one brings to the bench.

Best Sheet Metal Marker (2026): 5 Long Nib Picks for the Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Mkobon 15 PackBest OverallMkobon 15 Pack9.6/10View on Amazon
  2. 2LYXMYGS 20 PackBest Value PackLYXMYGS 20 Pack9.6/10View on Amazon
  3. 3Nicpro 6 PackMost ColorsNicpro 6 Pack9.6/10View on Amazon
  4. 4Zrpot 10 PackRuler on the SideZrpot 10 Pack9.6/10View on Amazon

Layout work on sheet metal comes down to a line you can see and trust: a cut line across a panel, a drill point inside a hole, a bend mark along an edge. A short marker stops at the surface, and a faint line disappears under handling and shop dust. The best sheet metal marker reaches into the hole, lays a bold line on light and dark metal, and leaves a mark that stays put until the part is cut, drilled or bent.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Mkobon 15 Pack: A 20 mm nib, five colors, an ABS shell, a pocket clip and a side ruler, the most complete marker here. Check price on Amazon
  • Best Value Pack LYXMYGS 20 Pack: 20 markers in five colors with a 20 x 1.5 mm nib, the largest pack here. Check price on Amazon
  • Most Colors Nicpro 6 Pack: Six colors including yellow, with a 20 x 1.5 mm nib and quick dry, waterproof ink. Check price on Amazon
  • Ruler on the Side Zrpot 10 Pack: A 60 mm ruler along the side, a 20 mm nib, and 10 markers in five colors. Check price on Amazon

The machines

Mkobon 15 Pcs Long Nib Marker Pens with 20 mm Long

Mkobon 15 Pcs Long Nib Marker Pens with 20 mm Long

Mkobon9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15 marker pack with a 20 mm long nib, five colors, an ABS shell, a pocket clip and a side ruler, made for deep holes and tight corners.

Pros

  • 20 mm long head reaches deep holes, narrow gaps and screw recesses
  • Five colors, 3 of each, for color coding by job or by cut
  • ABS shell with a pocket clip and a side ruler
  • Quick dry, waterproof ink that marks light and dark surfaces

Cons

  • 15 markers is fewer than the 20 marker pack here
  • No yellow in the five color set
  • Fine point lays a thin line that can be hard to read at a distance
  • ABS shell is plastic rather than metal
LYXMYGS 20 PCS Long Nib Marker Pens,20mm Long Head

LYXMYGS 20 PCS Long Nib Marker Pens,20mm Long Head

LYXMYGS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 marker pack with a 20 x 1.5 mm nib in five colors, the most markers of any pack here, for shops that mark every day.

Pros

  • 20 markers, the largest pack here, with spares of each color
  • 20 x 1.5 mm nib fits narrow gaps and small spaces
  • Quick dry, waterproof ink that resists fading
  • Marks aluminum, metal, concrete, glass, wood and plastic

Cons

  • No yellow in the five color set
  • No ruler on the marker for short measurements
  • Thin 1.5 mm nib lays a narrow line that can be hard to see from a distance
  • PP body is light plastic rather than metal
Nicpro 6 PCS Long Nib Marker Pens with 20mm Long

Nicpro 6 PCS Long Nib Marker Pens with 20mm Long

Nicpro9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 marker pack in six colors, the only pack here with yellow, with a 20 x 1.5 mm nib for deep reach marking on metal and tile.

Pros

  • Six colors including yellow, the most colors here
  • 20 x 1.5 mm nib reaches drill holes, frame joints and tight gaps
  • Waterproof pigment resists moisture, dust and smudging
  • Vivid lines on light and dark materials

Cons

  • Six markers is the smallest pack here
  • Six markers in six colors, so no spare of the color used most
  • No ruler on the marker
  • Six markers run out sooner than the larger packs here when marking is daily work
10 Pcs Long Nib Marker 20mm Long Head Deep Hole

10 Pcs Long Nib Marker 20mm Long Head Deep Hole

Zrpot9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 marker pack with a 20 mm nib and a 60 mm ruler along the side, in five colors with 2 of each, for metal, drilling and layout.

Pros

  • 60 mm ruler along the side helps with short measurements
  • 20 mm long nib reaches nail and screw holes in frames and lumber
  • Five colors, 2 of each, for color coding
  • Quick dry, waterproof ink that resists fading

Cons

  • No yellow in the five color set
  • 10 markers is fewer than the 15 and 20 marker packs here
  • 60 mm ruler covers short marks only
  • PP body is light plastic rather than metal
LYXMYGS 10 PCS Long Nib Marker Pens,20mm Long Head

LYXMYGS 10 PCS Long Nib Marker Pens,20mm Long Head

LYXMYGS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 marker pack with a 20 x 1.5 mm nib in five colors, for marking and drilling positions on metal and other shop surfaces.

Pros

  • 20 x 1.5 mm nib fits narrow gaps and small spaces
  • Five colors in one pack for color coding
  • Quick dry, waterproof ink that resists fading
  • Marks aluminum, metal, concrete, glass, wood and plastic

Cons

  • 10 markers is fewer than the 15 and 20 marker packs here
  • No yellow in the five color set
  • No ruler on the marker
  • PP body is light plastic rather than metal

Spec sheet comparison

Model Gear Score Pack size Colors Nib Material Extras Warranty
Mkobon 15 Pack 9.6/10 15 5 colors, 3 of each 20 mm ABS shell Pocket clip, side ruler None stated
LYXMYGS 20 Pack 9.6/10 20 5 colors 20 x 1.5 mm PP None stated None stated
Nicpro 6 Pack 9.6/10 6 6 colors 20 x 1.5 mm Not stated None stated None stated
Zrpot 10 Pack 9.6/10 10 5 colors, 2 of each 20 mm PP 60 mm ruler None stated
LYXMYGS 10 Pack 9.5/10 10 5 colors 20 x 1.5 mm PP None stated None stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026.

Buying guide: how to pick the best sheet metal marker

Nib reach

Every marker here has a 20 mm long nib, made to reach into deep holes, narrow gaps and screw recesses. The LYXMYGS and Nicpro markers state a 20 x 1.5 mm nib, a thin, round tip that fits between narrow gaps. Reach matters most when the mark has to land inside a drilled hole or a folded edge rather than on a flat face.

Color and contrast

Four markers here come in five colors, black, white, red, blue and green, while the Nicpro pack adds yellow for a sixth color. White shows on dark metal, black shows on light sheet, and bright colors help when parts are labeled by job or by cut. Pick the color against the metal in front of you, not against the pack.

Ink that stays put

Every marker here uses quick dry, waterproof ink that resists fading, smudging and wear, as the makers state. That matters when a marked sheet waits on the bench, gets handled, or sits in a damp shop. Let the mark dry before stacking sheets or wiping the surface.

Pack size

Packs here hold 6, 10, 15 or 20 markers. A larger pack suits a shop that marks every day and wants spares of each color, while a small pack suits a single job or a tool belt. The Mkobon pack holds 3 of each color, the Zrpot pack holds 2 of each, and the Nicpro pack holds 6 markers in 6 different colors.

Ruler and clip

The Mkobon marker has a side ruler and a pocket clip, and the Zrpot marker has a 60 mm ruler along the side. A ruler on the marker helps with short measurements at the bench, and a clip keeps the marker on a pocket or a tool belt instead of rolling off the bench. Neither feature changes the mark itself, so weigh them after reach, color and ink.

Use as directed. Sheet metal edges stay sharp after cutting, so handle marked sheets with care and keep the work area clear of offcuts. Cap each marker after use and store markers with the caps on so the nibs stay ready.

Before You Strike an Arc

  • Check that the nib reaches the hole or gap before marking the part.
  • Pick a color that shows clearly on the metal in front of you.
  • Let each mark dry before handling or stacking the sheet.
  • Check the cap clicks shut after use so the nib stays ready.
  • Keep a spare of the color you reach for most.

For more options, see our sheet metal tube guides.

FAQ for welders

What is a sheet metal marker?

A sheet metal marker is a permanent marker with a long nib, made to mark metal for cutting, drilling and layout. Every marker here has a 20 mm long nib that reaches into deep holes, narrow gaps and screw recesses, and quick dry, waterproof ink that marks light and dark surfaces.

How far can a long nib marker reach?

The nibs here are 20 mm long, and the LYXMYGS and Nicpro markers state a 20 x 1.5 mm nib. That reach fits inside drilled holes, frame joints and tight gaps where a standard marker tip cannot go. Measure the hole depth against the stated nib length before ordering.

Do these markers work on dark metal?

Yes. Every pack here includes a white marker, and the makers state vivid marks on light and dark surfaces. Use white on dark sheet and black on light sheet, and keep a bright color in the pack for labels that have to stand out.

Will the marks wash off?

The makers state quick dry, waterproof ink that resists water, fading and wear. Marks stay clear in damp shop conditions and under handling, as the makers state. For a mark that must come off later, plan on the ink being permanent.

How many markers come in a pack?

Packs here hold 6, 10, 15 or 20 markers. The Mkobon pack holds 15 markers, the LYXMYGS packs hold 10 or 20, the Nicpro pack holds 6, and the Zrpot pack holds 10. Larger packs give spares of each color for a busy shop.

What colors do these markers come in?

Four packs here come in five colors: black, white, red, blue and green. The Nicpro pack adds yellow for six colors. Color coding helps when parts are labeled by job, by cut, or by the next step in the build.

Related: best paint markers for metal, best blue layout fluid, metal scribe vs soapstone marker, and layout fluid vs soapstone.

Scoring, line by line

Each marker is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No marker here states a safety certification or a warranty term, so every marker here scores zero on safety and warranty, and the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Mkobon 15 Pack 9.6 30 21 21 n/a 0
LYXMYGS 20 Pack 9.6 29 20 22 n/a 0
Nicpro 6 Pack 9.6 29 21 20 n/a 0
Zrpot 10 Pack 9.6 29 20 20 n/a 0
LYXMYGS 10 Pack 9.5 29 20 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides