Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Pipe Cutter with Reamer (2026): 4 Picks Compared

Four pipe cutters with reamers compared by cut range, reamer type, materials stated and warranty, for copper and tube work in the shop.

Best Pipe Cutter with Reamer (2026): 4 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TOLESA Pipe Cutter SetBest OverallTOLESA Pipe Cutter Set9.7/10View on Amazon
  2. 2Reonite Tube Cutter SetMost Complete KitReonite Tube Cutter Set9.6/10View on Amazon
  3. 3DURATECH Tubing CutterLifetime WarrantyDURATECH Tubing Cutter9.5/10View on Amazon
  4. 4SEDY Tube Cutter SetAlloy Steel SetSEDY Tube Cutter Set9.5/10View on Amazon

The tube is marked, the fitting is ready, and the cut end still carries a burr that keeps the joint from seating clean. A pipe cutter with a reamer on board cuts the tube and cleans the edge with the same tool, so the fit-up goes faster. This guide compares the best pipe cutter with reamer picks by cut range, reamer type, materials stated and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall TOLESA Pipe Cutter Set: Two cutters cover 1/8 to 2 inches, SKD wheels, and stainless steel among the stated materials Check price on Amazon
  • Most Complete Kit Reonite Tube Cutter Set: Two cutters, an inner-outer reamer, a deburring tool and a toolbox in one set Check price on Amazon
  • Lifetime Warranty DURATECH Tubing Cutter: Single cutter for 1/8 to 1-1/4 inch tube with a fold-away reamer and a lifetime warranty Check price on Amazon
  • Alloy Steel Set SEDY Tube Cutter Set: Two alloy steel cutters for 1/8 to 2 inches with a high-speed steel deburring tool Check price on Amazon

The machines

TOLESA Pipe Cutter Tool Heavy Duty 1/8''-2''

TOLESA Pipe Cutter Tool Heavy Duty 1/8''-2''

TOLESA9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A two-cutter set for 1/8 to 2 inch tube with SKD wheels, a separate pipe reamer and a deburring tool.

Pros

  • SKD cutter wheels with 6 ball bearing rollers for a firm grip
  • Stainless steel is among the stated materials, with copper, aluminum, brass and PVC
  • Two cutters cover 3/16 to 2 inches and 1/8 to 3/4 inch for tight spaces
  • Separate deburring tool and pipe reamer are included in the set

Cons

  • No warranty term is stated
  • The range is split across two cutters, so larger tube needs the heavy-duty cutter
  • The mini cutter stops at 3/4 inch, below the 7/8 inch minis here
  • The reamer and deburring tool are separate pieces, not built into the cutter
Reonite 4 Piece Professional Tube Cutter Set

Reonite 4 Piece Professional Tube Cutter Set

Reonite9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 piece set with two cutters, an inner-outer reamer, a deburring tool and a toolbox for copper and tube work.

Pros

  • Inner-outer reamer and deburring tool in premium steel are included
  • 6-roller bearing design keeps tubing centered while rotating
  • Toolbox is included for carrying and storage
  • Removable protective cap covers the cutting wheel in storage

Cons

  • The main cutter range starts at 1/4 inch, so the smallest tube needs the mini cutter
  • No warranty term is stated
  • Stainless steel is not among the materials stated for this set
  • The set dimensions are stated at 9.84 by 6.0 by 2.0 inches, bulky for a small tool bag
DURATECH Tubing Cutter, Cuts from 1/8" to 1-1/4"

DURATECH Tubing Cutter, Cuts from 1/8" to 1-1/4"

DURATECH9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single tubing cutter for 1/8 to 1-1/4 inch soft metal tube with a fold-away reamer and a spare wheel in the handle.

Pros

  • Fold-away reamer is built into the cutter for deburring after the cut
  • Extra replacement wheel stores in the handle; pry off the cap to swap
  • Lifetime warranty is stated
  • Enlarged grip knob and ball bearing rollers for firm clamping

Cons

  • Cut range stops at 1-1/4 inch OD, the narrowest top end here
  • Stated materials are soft and thin-wall metals; stainless steel is not stated
  • Single cutter only, with no mini cutter for tight spaces
  • The spare wheel sits under the handle cap, so the cap must come off to swap wheels
Ultimate Tube Cutter Set

Ultimate Tube Cutter Set

SEDY9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A two-cutter alloy steel set for 1/8 to 2 inch tube with six bearings and a high-speed steel deburring tool.

Pros

  • Two cutters cover 3/16 to 2 inches and 1/8 to 7/8 inch
  • Heat-treated alloy steel construction, stated as rust-free
  • Six independent bearings for smoother, more precise cutting
  • High-speed steel deburring tool is included

Cons

  • The set states a deburring tool; a pipe reamer is not stated
  • Stated materials stop at copper, aluminum and PVC
  • The large cutter starts at 3/16 inch, so 1/8 inch tube needs the mini cutter
  • Two cutters cover overlapping ranges, so one cutter may sit unused on many jobs

Spec sheet comparison

Model Gear Score Cut range Reamer Materials stated Warranty
TOLESA Pipe Cutter Set 9.7/10 1/8 to 2 in (two cutters) Pipe reamer and deburring tool Stainless steel, copper, aluminum, brass, PVC Not stated
Reonite Tube Cutter Set 9.6/10 1/4 to 2 in and 1/8 to 7/8 in Inner-outer reamer and deburring tool Copper, aluminum, brass, PVC Not stated
DURATECH Tubing Cutter 9.5/10 1/8 to 1-1/4 in OD Fold-away reamer Copper, brass, aluminum, plastic Lifetime
SEDY Tube Cutter Set 9.5/10 3/16 to 2 in and 1/8 to 7/8 in Deburring tool Copper, aluminum, PVC Not stated

Ratings in this table are the makers’ own claims taken from each product page (21 November 2026).

Buying guide: choosing the best pipe cutter with reamer

Cut range and tube size

Cut range is the outside diameter the wheel can reach. The TOLESA set covers 1/8 to 2 inches across two cutters, a heavy-duty cutter for 3/16 to 2 inches and a mini cutter for 1/8 to 3/4 inch. The Reonite set pairs a 1/4 to 2 inch cutter with a 1/8 to 7/8 inch mini, and the SEDY set pairs 3/16 to 2 inches with 1/8 to 7/8 inch. The DURATECH is a single cutter for 1/8 to 1-1/4 inch tube. Match the range to the tube on your bench before you buy.

Reamer and deburring tool

A reamer cleans the burr from the cut edge so the tube seats into a fitting. The DURATECH reamer folds away into the cutter body. The TOLESA set includes a separate pipe reamer and a deburring tool. The Reonite set includes a deburring tool and an inner-outer reamer. The SEDY set states a deburring tool made of high-speed steel. A built-in reamer stays with the cutter; separate tools can be set down and lost in a busy shop.

Materials and cutting wheel

Wheel and roller design decide how steady the cut runs. The TOLESA uses SKD cutter wheels with 6 ball bearing rollers and states stainless steel among its materials. The Reonite uses a 6-roller bearing design and states copper, aluminum, brass and PVC. The SEDY uses six independent bearings and heat-treated alloy steel, and states copper, aluminum and PVC. The DURATECH uses a premium steel wheel with ball bearing rollers and states copper, brass, aluminum and plastic. Buy for the tube material you cut most, and check the stated materials on each card.

Spare wheel and storage

Cutting wheels wear, and a spare keeps the tool working. The DURATECH stores an extra replacement wheel in the handle; pry off the cap for a quick swap. The Reonite set comes with a toolbox and a removable protective cap that covers the cutting wheel in storage. The TOLESA set comes in gift packaging with the deburring tool and reamer as separate pieces. Check what is in the box on arrival against the card for each pick.

Use as directed. Keep fingers clear of the cutting wheel while you turn the cutter, and support long tube so it does not drop when the cut parts. Deburr the cut edge before you fit the tube, and store the cutter with the wheel covered where a cap is supplied. See our Safety Disclaimer.

Before You Strike an Arc

  • Check the tube outside diameter against the cutter range on the card before the first cut.
  • Confirm which reamer or deburring tool is in the box: fold-away, separate, or inner-outer.
  • On the DURATECH, pry off the handle cap and confirm the spare wheel is inside.
  • On the Reonite set, check the toolbox holds both cutters, the deburring tool and the inner-outer reamer.
  • Deburr a scrap cut first and check the edge seats into your fitting before you cut the good tube.

FAQ for welders

What size pipe cutter do I need for copper tube?

Match the cutter range to the tube outside diameter. The DURATECH covers 1/8 to 1-1/4 inch, and the sets here reach 2 inches with their large cutters. The mini cutters cover 1/8 to 3/4 inch on the TOLESA and 1/8 to 7/8 inch on the Reonite and SEDY sets.

What does the reamer do on a pipe cutter?

The reamer removes the burr left inside the cut edge so the tube seats cleanly. The DURATECH reamer folds away into the body, the TOLESA includes a separate pipe reamer, and the Reonite includes an inner-outer reamer. The SEDY set states a deburring tool for refining the edge after cutting.

Can these pipe cutters cut stainless steel?

The TOLESA states stainless steel among its materials, with SKD cutter wheels. The Reonite, DURATECH and SEDY cards state copper and aluminum, with brass and PVC or plastic also stated. Check the materials on each card against the tube you plan to cut.

Do these pipe cutters come with a warranty?

The DURATECH states a lifetime warranty. The TOLESA, Reonite and SEDY listings state no warranty term, so their warranty score here is zero. Check the warranty line on each card before you order.

Related: best tube cutter set, tube cutter vs pipe cutter, best copper deburring tool, and the sheet metal and tubing hub. Also see our best mini tube cutter. Also see our types of deburring tools. Also see our pipe reamer for copper. Also see our best pipe reamer tool.

Scoring, line by line

Each cutter is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Pipe cutters have no electrical safety listing to state, so every pick here scores zero on that criterion; the ranking comes from the other four. Only the DURATECH states a warranty term, a lifetime warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TOLESA Pipe Cutter Set 9.7 32 21 22 n/a 0
Reonite Tube Cutter Set 9.6 30 21 21 n/a 0
DURATECH Tubing Cutter 9.5 23 19 18 n/a 3
SEDY Tube Cutter Set 9.5 28 20 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides