Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Mini Lathe Inserts: 5 Carbide Packs Compared

Five carbide mini lathe insert packs compared on insert style, coating, pack count, thickness and the workpiece materials each maker names.

Best Mini Lathe Inserts: 5 Carbide Packs Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Maclix CCMT + DCMT 20-PackBest OverallMaclix CCMT + DCMT 20-Pack9.6/10View on Amazon
  2. 2ASZLBYM RCMT + Holder KitBest With HolderASZLBYM RCMT + Holder Kit9.6/10View on Amazon
  3. 3Maclix TCMT 20-PackBest TCMT RefillsMaclix TCMT 20-Pack9.6/10View on Amazon
  4. 4Zouzmin CCMT 50-PackMost InsertsZouzmin CCMT 50-Pack9.6/10View on Amazon

A mini lathe turning steel or stainless will eat a dull edge fast, and the best mini lathe inserts are the packs that match your holder, your workpiece material and the finish you need. We compared what each maker states: insert style, coating, pack count, thickness and the materials each pack is made for. Every pick here is a carbide turning insert pack for small lathe work, scored on stated figures only.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Maclix CCMT + DCMT 20-Pack: Two styles in one case, with the widest stated use split Check price on Amazon
  • Best With Holder ASZLBYM RCMT + Holder Kit: Round inserts plus a 12 mm holder and wrench in the box Check price on Amazon
  • Best TCMT Refills Maclix TCMT 20-Pack: Stated fit for S08K and S10K-STFCR11 boring bars Check price on Amazon
  • Most Inserts Zouzmin CCMT 50-Pack: 50 CCMT inserts for steel and stainless turning Check price on Amazon

The machines

Maclix 10pcs CCMT060204/CCMT21.51+10pcs

Maclix 10pcs CCMT060204/CCMT21.51+10pcs

Maclix9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Twenty cemented carbide inserts, ten CCMT and ten DCMT, with a TISIN coating and a plastic storage case.

Pros

  • Two insert styles in one pack: CCMT for finishing and DCMT for semi-finishing and boring, as the maker states
  • Cemented carbide matrix at 3/32 inch (2.38 mm) thickness with chip breakers
  • Maker names steel, stainless steel, cast iron and non-ferrous materials
  • Plastic case included for storage

Cons

  • Inserts only; no tool holder is included in the pack
  • Ten inserts per style is a small count for shops that turn daily
  • No warranty term is stated
  • Will not suit holders made for TCMT or RCMT inserts
ASZLBYM 11PCS RCMT060204 MO R3 Round Carbide

ASZLBYM 11PCS RCMT060204 MO R3 Round Carbide

ASZLBYM9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Eleven round RCMT carbide inserts with a 12 mm shank holder and T8 wrench, coated in CVD Al2O3 TICN.

Pros

  • Holder and T8 wrench included, the only pack here with a tool holder
  • Round RCMT inserts at 0.236 inch diameter with 7 degree clearance, as stated
  • CVD Al2O3 TICN coating named by the maker
  • Holder shank stated at 1/2 inch (12 mm) with 100 mm overall length

Cons

  • Only eleven inserts in the pack, the lowest insert count here
  • Round inserts suit round-insert holders only, not CCMT or DCMT holders
  • No warranty term is stated
  • Kit is built around one holder size, 12 mm shank, so other tool posts need a different holder
20pcs TCMT110204 / TCMT21.51 Carbide Turning

20pcs TCMT110204 / TCMT21.51 Carbide Turning

Maclix9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Twenty TCMT cemented carbide inserts with a TISIN coating for STFCR11 boring bar holders, in a plastic case.

Pros

  • Holder fit stated: S08K and S10K-STFCR11 turning tool holders
  • Cemented carbide matrix at 3/32 inch (2.38 mm) thickness with chip breakers
  • Maker names steel, stainless steel, cast iron and non-ferrous materials
  • Plastic case included for storage

Cons

  • One insert style only; no CCMT or DCMT inserts in the pack
  • Inserts only; no tool holder is included in the pack
  • Twenty inserts is a small count next to the 50-piece pack here
  • Will not suit holders made for CCMT, DCMT or RCMT inserts
Zouzmin 50PCS CCMT21.51 CCMT060204 Carbide Turning

Zouzmin 50PCS CCMT21.51 CCMT060204 Carbide Turning

zouzmin9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Fifty solid carbide CCMT inserts with a multilayer coating for stainless steel and steel turning work.

Pros

  • 50 inserts in the pack, the highest count here
  • Solid carbide with multilayer coating, as the maker states
  • Thickness stated at 3/32 inch with 1/64 inch radius, single sided
  • Diamond shape with chipbreaker for turning and finishing

Cons

  • One insert style only; no DCMT, TCMT or round inserts in the pack
  • Maker names stainless steel and steel only, a narrower material list than the Maclix packs
  • Inserts only; no tool holder is included in the pack
  • No storage case is named in the pack contents
Zouzmin CCMT21.51 CCMT060204 DCMT21.51 DCMT070204

Zouzmin CCMT21.51 CCMT060204 DCMT21.51 DCMT070204

zouzmin9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Twenty multilayer coated carbide inserts in CCMT and DCMT styles for steel, stainless, cast iron and non-ferrous work.

Pros

  • Two insert styles, CCMT and DCMT, in one 20-piece pack
  • Maker names stainless steel, steel, cast iron and non-ferrous materials
  • Thickness stated at 3/32 inch with 1/64 inch radius, single sided
  • Solid carbide with multilayer coating, as the maker states

Cons

  • Inserts only; no tool holder is included in the pack
  • Twenty inserts total, well under the 50-piece CCMT pack here
  • No storage case is named in the pack contents
  • Will not suit holders made for TCMT or RCMT inserts

Spec sheet comparison

Insert pack Gear Score Styles Count Coating Thickness
Maclix CCMT + DCMT 20-Pack 9.6/10 CCMT + DCMT 20 TISIN 3/32 in
ASZLBYM RCMT + Holder Kit 9.6/10 RCMT round 11 + holder CVD Al2O3 TICN 0.094 in
Maclix TCMT 20-Pack 9.6/10 TCMT 20 TISIN 3/32 in
Zouzmin CCMT 50-Pack 9.6/10 CCMT 50 Multilayer coated 3/32 in
Zouzmin CCMT + DCMT 20-Pack 9.5/10 CCMT + DCMT 20 Multilayer coated 3/32 in

All specs here repeat what the maker rates and the listing prints, copied down 21 November 2026.

Buying guide: choosing the best mini lathe inserts

Insert style decides the holder

CCMT, DCMT, TCMT and RCMT are different insert shapes, and each one fits only the holder pocket made for it. The Maclix TCMT 20-Pack states its fit directly: S08K and S10K-STFCR11 turning tool holders. The ASZLBYM kit sidesteps the match by including its SRDCN 1212H06 holder with a 12 mm shank. The other packs name insert styles without holder fit, so check the designation on your holder before you order. For holder options, see our best turning tool holder guide.

Coating and carbide as stated

Coating names differ by maker. The Zouzmin packs state a multilayer coating on solid carbide. The Maclix packs state a TISIN coating on a cemented carbide matrix. The ASZLBYM round inserts state a CVD Al2O3 TICN coating on carbide. No maker here states cutting speeds or feeds, so compare the coating and carbide wording as written and match it to the holder and material you run. If you are weighing carbide against high-speed steel for small work, see our carbide vs HSS lathe bits comparison.

Pack count and what is in the box

Counts run from eleven inserts in the ASZLBYM kit to fifty in the Zouzmin CCMT 50-Pack, with the other three packs at twenty. Only the ASZLBYM kit includes a holder and a T8 wrench; the rest are inserts only. The Maclix packs include a plastic case, and the ASZLBYM kit ships in a plastic container. The Zouzmin packs name no case in the pack contents, so plan your own storage if you order those.

Workpiece materials the makers name

Material lists are stated, not assumed. The Maclix packs and the Zouzmin 20-Pack name steel, stainless steel, cast iron and non-ferrous materials. The Zouzmin 50-Pack names stainless steel and steel. The ASZLBYM kit names cast iron, steel parts and stainless steel. Match your workpiece to the list the maker gives for that pack, and treat any material not named as unconfirmed for that insert.

Use as directed. Wear eye and face protection at the lathe, clamp the work firmly, keep gloves away from rotating parts and keep guards in place. Check that each insert seats flat in its holder pocket before you start the spindle, and stop the machine before changing inserts.

Before You Strike an Arc

  • Match the insert designation on the pack to the holder pocket before ordering: CCMT, DCMT, TCMT and RCMT styles here do not interchange.
  • Check the stated thickness against your holder: 3/32 inch (2.38 mm) is the figure the makers state across these packs.
  • Confirm what is in the box on arrival: only the ASZLBYM kit names a holder and wrench; the other packs name inserts, with cases on the Maclix packs.
  • Wear safety glasses at the lathe and keep the work area ventilated, as the ASZLBYM maker states for its kit.

FAQ for welders

Which insert styles are in these packs?

The packs cover four styles: CCMT and DCMT in the Maclix and Zouzmin mixed packs, CCMT alone in the Zouzmin 50-Pack, TCMT in the Maclix 20-Pack, and round RCMT in the ASZLBYM kit. Each style fits only the holder made for it.

Do any packs include a tool holder?

Only the ASZLBYM kit includes a holder, the SRDCN 1212H06 with a 12 mm shank, plus a T8 wrench. The Maclix and Zouzmin packs are inserts only, so you need a matching holder already on the lathe.

What materials do the makers name for these inserts?

The Maclix packs and the Zouzmin 20-Pack name steel, stainless steel, cast iron and non-ferrous materials. The Zouzmin 50-Pack names stainless steel and steel, and the ASZLBYM kit names cast iron, steel parts and stainless steel.

What thickness do the inserts state?

The CCMT, DCMT and TCMT inserts state 3/32 inch thickness, given as 2.38 mm by the Maclix makers. The round RCMT inserts state 0.094 inch, also given as 2.38 mm, with a 0.236 inch diameter and 7 degree clearance angle.

Which pack has the most inserts?

The Zouzmin CCMT 50-Pack, with fifty CCMT inserts. The Maclix packs and the Zouzmin mixed pack hold twenty each, and the ASZLBYM kit holds eleven round inserts plus the holder and wrench.

Related: metalworking machines, lathes and mills and best lathe cutting tools. Also see our best CNC lathe tools. Also see our types of lathe tools. Also see our metal lathe for beginners. Also see our best lathe cut off tool.

Scoring, line by line

Each pack is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Carbide inserts carry no safety certification to state, so every pack here scores zero on that criterion, and no maker here states a warranty term; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Maclix CCMT + DCMT 20-Pack 9.6 30 21 21 n/a 0
ASZLBYM RCMT + Holder Kit 9.6 28 21 22 n/a 0
Maclix TCMT 20-Pack 9.6 28 21 21 n/a 0
Zouzmin CCMT 50-Pack 9.6 27 20 22 n/a 0
Zouzmin CCMT + DCMT 20-Pack 9.5 26 19 20 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides