Best Metal Fabrication Shears (2026): 4 Shears Compared
Four metal fabrication shears compared on cutting capacity, power, head rotation and warranty, with every figure taken from the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWild Edge Electric Shear9.6/10View on Amazon - 2
Best Cordless PowerPropeLannt Cordless Shear9.6/10View on Amazon - 3
Best DeWalt FitDEMIMA Cordless Shear9.5/10View on Amazon - 4
Best Manual ShearKASTFORCE KF5014 Shear9.4/10View on Amazon
A sheet of steel waits on the bench, marked for a duct, a patch panel or a bracket, and the best metal fabrication shears are the tool that turns the mark into a clean edge without a grinder showering sparks. Four shears are compared here: two cordless, one corded electric and one manual hand shear, scored on what each listing states. The Wild Edge leads on stated capacity and warranty, while the PropeLannt leads on cordless torque and safety features.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Wild Edge Electric Shear: 5.0 amp motor, 14 gauge cut, 360 degree swivel head, 1-year warranty Check price on Amazon
- Best Cordless Power PropeLannt Cordless Shear: 400Nm brushless motor, 14 gauge cut, safety lock, LED light Check price on Amazon
- Best DeWalt Fit DEMIMA Cordless Shear: 800W brushless motor, 2300 RPM, 3 mm cut, 360 degree head Check price on Amazon
- Best Manual Shear KASTFORCE KF5014 Shear: throatless rotary hand shear, 16 gauge, benchtop design Check price on Amazon
The machines

Wild Edge Electric Metal Shear
A 5.0 amp electric shear with a 360 degree swivel head, variable speed from 0 to 2700 strokes per minute, and a 1-year warranty.
Pros
- Cuts 14 gauge sheet metal and 15 gauge stainless steel
- Variable speed from 0 to 2700 strokes per minute
- 360 degree swivel head cuts circles, curves and irregular shapes
- Two-finger trigger and lock-on button for control
Cons
- No LED work light is stated
- Cuts stainless only to 15 gauge, thinner than its 14 gauge steel rating
- Double-cut blade leaves curled pieces 1/4 inch wide to clear
- No stated cutting thickness in millimeters

Cordless Metal Shears Compatible with Milwaukee
A cordless shear for Milwaukee 18V batteries with a 400Nm brushless motor, 360 degree pivoting head, anti-mishap safety lock and LED light.
Pros
- 400Nm brushless motor cuts 14 gauge steel
- Anti-mishap safety lock prevents accidental activation
- IP54-rated housing resists debris
- 360 degree pivoting head with LED work light
Cons
- Battery not included, tool only
- Fits Milwaukee 18V batteries only
- No warranty term is stated
- No weight or size is stated

DEMIMA Cordless Metal Shears for Dewalt 20V
A cordless shear for DeWalt 20V batteries with an 800W brushless motor, 2300 RPM, 230 ft-lbs of torque and a 360 degree rotatable alloy head.
Pros
- 800W brushless motor with 2300 RPM and 230 ft-lbs of torque
- 360 degree rotatable alloy head reaches tight spots
- Variable speed trigger with two cutting modes
- LED work light and 3 mm maximum cutting thickness
Cons
- Battery not included, tool only
- Fits DeWalt 20V batteries only
- No warranty term is stated
- No weight or size is stated

KASTFORCE KF5014 Sheet Metal Shear Throatless
A throatless rotary hand shear with a long handle and benchtop design, cutting mild steel sheet up to 16 gauge or 1.5 mm.
Pros
- Throatless rotary design allows unlimited cutting depth
- Long handle gives controlled movement for straight and curved cuts
- Compact benchtop design for small sheet metal projects
- No battery or outlet needed
Cons
- Manual, so cutting speed depends on the operator
- Cuts only to 16 gauge, thinner than the 14 gauge electric picks
- No spare blade or cutting wheel is stated in the box
- No LED work light is stated
Spec sheet comparison
| Shear | Gear Score | Power | Max cut | Head | Weight | Warranty |
|---|---|---|---|---|---|---|
| Wild Edge Electric Shear | 9.6/10 | 5.0 amp electric | 14 ga steel, 15 ga stainless | 360 degree swivel | 4.8 pounds | 1 year |
| PropeLannt Cordless Shear | 9.6/10 | Cordless, Milwaukee 18V | 14 ga steel | 360 degree pivoting | Not stated | Not stated |
| DEMIMA Cordless Shear | 9.5/10 | Cordless, DeWalt 20V, 800W | 3 mm | 360 degree rotatable | Not stated | Not stated |
| KASTFORCE KF5014 Shear | 9.4/10 | Manual hand shear | 16 ga / 1.5 mm mild steel | Throatless rotary | 5.39 pounds | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (22 November 2026).
Buying guide: the best metal fabrication shears
Cordless or corded
Two shears here are cordless and two are not. The DEMIMA runs on DeWalt 20V batteries and the PropeLannt on Milwaukee 18V batteries, both tool only, so the battery platform decides the pick. The Wild Edge is a 5.0 amp electric shear, and the KASTFORCE is a manual hand shear that needs no power at all. See the best metal nibbler for another way to cut sheet.
Cutting capacity
The Wild Edge and PropeLannt both state a 14 gauge steel cut, while the DEMIMA states a maximum of 3 mm and the KASTFORCE states 16 gauge or 1.5 mm for mild steel. The Wild Edge also states 15 gauge stainless steel. Match the stated capacity to the thickest metal on the job, and remember the KASTFORCE is a hand shear, so its pace is the operator’s.
Head rotation
Three shears state a 360 degree head: the Wild Edge swivels, the PropeLannt pivots and the DEMIMA rotates, all for circles, curves and tight spots. The KASTFORCE takes a different path with a throatless rotary mechanism that allows unlimited cutting depth. A rotating head matters most on roofing and ductwork, where the cut rarely runs straight.
Weight and handling
Only two listings state a weight: the Wild Edge at 4.8 pounds and the KASTFORCE at 5.39 pounds. The Wild Edge lists an ergonomic over-mold grip and a two-finger trigger with a lock-on button, while the KASTFORCE lists a long handle for controlled movement. Neither cordless shear states a weight, so balance cannot be compared from the listings.
Battery platform
Both cordless shears are tool only. The DEMIMA lists DeWalt 20V Max batteries DCB200, DCB201, DCB203, DCB204, DCB205 and DCB206, and the PropeLannt lists Milwaukee 18V batteries. Check the battery on the shelf before ordering, since neither box includes one. For cutting with a different tool, see cutting torch vs plasma cutter.
Use as directed. Clamp the work, wear eye and face protection, and keep gloves away from the cutting head. Keep cords clear of the cut line, and never exceed the stated cutting capacity. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Check the battery platform first: the DEMIMA takes DeWalt 20V batteries and the PropeLannt takes Milwaukee 18V batteries, both tool only.
- Check the stated capacity against the metal on the bench: 14 gauge for the Wild Edge and PropeLannt, 3 mm for the DEMIMA, 16 gauge for the KASTFORCE.
- Fit the head to the cut: the three electric shears state a 360 degree head, and the KASTFORCE uses a throatless rotary mechanism.
- Check on arrival that the blade, trigger and lock work before the first cut.
FAQ for welders
What gauge can these shears cut?
The Wild Edge and PropeLannt state 14 gauge steel, the DEMIMA states 3 mm, and the KASTFORCE states 16 gauge or 1.5 mm mild steel. The Wild Edge also states 15 gauge stainless steel.
Which shears here are cordless?
The DEMIMA, which runs on DeWalt 20V batteries, and the PropeLannt, which runs on Milwaukee 18V batteries. Both are tool only, with no battery included.
Do any of these shears state a warranty?
Only the Wild Edge, with a 1-year warranty stated. The other three state no warranty term.
Which shear has a safety lock?
The PropeLannt, which states an anti-mishap safety lock to prevent accidental activation, plus an IP54-rated housing.
Can the KASTFORCE cut thick steel?
No. It states a 16 gauge, 1.5 mm capacity for mild steel sheet, thinner than the 14 gauge cut the electric picks state.
Related: best sheet metal tools, best metal nibbler, manual sheet metal nibbler, and the sheet metal and tubing hub. Also see our best sheet metal hammer. Also see our plasma cutter safety.
Scoring, line by line
Each shear is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For a shear, safety means a stated safety lock, housing rating or certification; only the PropeLannt names one. Only the Wild Edge states a warranty, 1 year.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Wild Edge Electric Shear | 9.6 | 32 | 22 | 21 | 0 | 3 |
| PropeLannt Cordless Shear | 9.6 | 30 | 21 | 21 | 6 | 0 |
| DEMIMA Cordless Shear | 9.5 | 29 | 21 | 20 | 0 | 0 |
| KASTFORCE KF5014 Shear | 9.4 | 26 | 20 | 19 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




