Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cutting Torch vs Plasma Cutter: Which One Should You Buy?

A cutting torch and a plasma cutter both cut steel, but one runs on gas and the other on electricity, so the choice comes down to thickness, setup and where the cutting happens.

Cutting Torch vs Plasma Cutter: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Plasma Cutter torchPlasma Cutter torch9.6/10View on Amazon
  2. 2ARCCAPTAIN iControl CUT60 Pro Plasma Cutter MachineARCCAPTAIN iControl CUT60 Pro Plasma Cutter Machine9.8/10View on Amazon
  3. 3Bestarc AG60P Pilot Arc Plasma Cutting TorchBestarc AG60P Pilot Arc Plasma Cutting Torch9.5/10View on Amazon
  4. 4ARCCAPTAIN 65A Plasma Cutter MachineARCCAPTAIN 65A Plasma Cutter MachineView on Amazon
  5. 5ARCCAPTAIN iControl CUT55 MP [Non-HF] Plasma Cutter MachineARCCAPTAIN iControl CUT55 MP [Non-HF] Plasma Cutter MachineView on Amazon
  6. 6RX WELD V-Style Cutting TorchRX WELD V-Style Cutting TorchView on Amazon
  7. 7ARCCAPTAIN Medium Duty Oxy Acetylene Cutting Torch with CheckARCCAPTAIN Medium Duty Oxy Acetylene Cutting Torch with CheckView on Amazon
  8. 8TOAUTO Heavy Duty Cutting TorchTOAUTO Heavy Duty Cutting TorchView on Amazon
  9. 9SÜA 36" Heavy Duty Straight Cutting Torch 90° HeadSÜA 36" Heavy Duty Straight Cutting Torch 90° HeadView on Amazon

A cutting torch vs plasma cutter choice comes down to what you cut and where you cut it. A cutting torch uses an oxygen and acetylene flame to heat steel so a jet of oxygen can cut it, and it suits thick steel and outdoor work without a power supply. A plasma cutter runs an electric arc through compressed air, and it suits thin sheet and clean cuts in the shop. This guide compares the methods, and the torch examples below are all cutting torches; no plasma cutter listing is in the data, so the plasma side is described by the method, not by a listing.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The difference in one paragraph

A cutting torch burns acetylene in oxygen to make a flame that heats the steel, and then a jet of pure oxygen oxidizes the hot steel and blows the molten metal away. A plasma cutter runs an electric arc through compressed air to melt and blow away a narrow line of metal, and it needs a power supply and an air supply. The torch suits thick steel and outdoor work without power, and the plasma cutter suits thin sheet and clean cuts in the shop.

Side by side

Cutting torch Plasma cutter What it means
Power source Oxygen and acetylene from cylinders Electricity and compressed air A torch needs gas cylinders; a plasma cutter needs power and air
Cutting capacity RX WELD: cuts 3/4 in steel with the included tip; up to 8 in steel with a different tip Cuts thin sheet well; thicker steel needs a larger machine The torch reaches thicker steel with the right tip
Setup Torch handle, cutting attachment and tip; connect oxygen and acetylene tanks Cutter, power lead and air supply Both need a gas or power source before the first cut
Outdoor work Works outdoors without a power supply Needs power and air, so field use needs a generator and compressor The torch suits farm and field work
Cut quality Wider cut with more heat; needs cleanup Narrower cut with less heat on thin metal Plasma leaves a cleaner edge on thin sheet
Safety features Check valves; built-in flashback arrestors on one torch Safety features vary by machine RX WELD recommends flashback arrestors; only the JZWELD torch lists them as built in
In the box Handle, attachment, tips and check valves Cutter, torch, consumables and air hose Compare the full kit, not just the torch or the cutter
Best for Thick steel, farm work and auto repair Thin sheet, auto body and clean cuts Pick the torch for thick steel and the plasma cutter for thin sheet

The table above compares the methods side by side, with the torch side drawn from the listings below.

The torches in this guide

The torch examples rank by stated capability. The ARCCAPTAIN set leads on versatility: it cuts 6 in carbon steel, welds up to 2 in, and includes a torch handle, attachment, check valves, cutting and welding nozzles, a tip cleaner and a lighter, with a 180-Day warranty. The JZWELD torch follows: a 21 in torch with built-in flashback arrestors and check valves, plus 1-1-101 and 2-1-101 tips that cut 3/4 in to 38.1 mm steel. The RX WELD torch cuts 3/4 in steel with the included tip and up to 8 in steel with a different tip, and it includes check valves. The Victor kit states the least: a medium duty torch handle and cutting attachment with no burner hose included.

Cutting torch vs plasma cutter: when each one wins

A cutting torch wins on thick steel and outdoor work. The RX WELD torch cuts 3/4 in steel with the included tip and up to 8 in steel with a different tip, and the ARCCAPTAIN set cuts 6 in carbon steel. A torch needs no power supply, only oxygen and acetylene cylinders, so it works on a farm or a job site without electricity.

A plasma cutter wins on thin sheet and clean cuts in the shop. It runs an electric arc through compressed air, so it needs a power supply and an air supply, and it leaves a narrower cut with less heat on thin metal. If the work is mostly thin sheet and auto body panels, the plasma cutter is the cleaner choice.

How to tell what a torch supports

Check the tip series and the hose size before ordering. The RX WELD and ARCCAPTAIN torches use Series 3 Type 101 tips, and the JZWELD torch uses ST-900FC Series tips with 1-1-101 and 2-1-101 cutting tips. The RX WELD torch fits 9/16 in-18 hoses, and the JZWELD torch has an outlet nipple and nut in the same size. A torch that lists welding nozzles, like the ARCCAPTAIN set with welding nozzles in sizes 0, 2 and 4, also welds.

Which gas does a cutting torch use?

A cutting torch uses oxygen and acetylene from cylinders, and the RX WELD torch works with acetylene and oxygen. The ARCCAPTAIN set supports multiple gases and connects to oxygen and acetylene tanks, and the torch is lit and adjusted to a neutral flame before the cut. Check the listing for the gas the torch supports, and follow the ignition and cutting procedure the maker gives.

Can one torch cut and weld?

Yes, with the right nozzles. The ARCCAPTAIN set cuts 6 in carbon steel and welds up to 2 in, and it includes cutting nozzles and welding nozzles in sizes 0, 2 and 4, so it cuts, welds, brazes and solders. A cutting torch that lists only a cutting tip, like the RX WELD torch with its 1-3-101 cutting tip, is a cutting tool, so check the listing for welding nozzles before counting on it to weld.

FAQ for welders

Can a cutting torch cut the same steel as a plasma cutter?

Yes, for thick steel a cutting torch is the stronger choice. The RX WELD torch cuts 3/4 in steel with the included tip and up to 8 in steel with a different tip, and the ARCCAPTAIN set cuts 6 in carbon steel. A plasma cutter suits thinner steel and cleaner cuts, so the choice comes down to the thickness of the steel and where the cutting happens.

Does a cutting torch need a power supply?

No. A cutting torch runs on oxygen and acetylene from cylinders, and none of the torch listings in this guide needs electricity. That is why a torch suits farm and field work away from a power supply, while a plasma cutter needs power and air.

What size tip should a cutting torch use?

Match the tip to the thickness. The included 1-3-101 tip cuts 3/4 in steel, and the JZWELD 1-1-101 tip cuts 3/4 in steel while the 2-1-101 tip cuts 25.4 to 38.1 mm steel. For thicker steel, buy a different tip size, like the 6-1-101 tip that cuts up to 8 in steel.

Are flashback arrestors required on a cutting torch?

One listing recommends them. RX WELD recommends flashback arrestors for maximum protection, and the JZWELD torch has built-in flashback arrestors and check valves. The ARCCAPTAIN torch has a check valve with a double-sealing ring design, and the RX WELD torch includes check valves.

Can a plasma cutter replace a cutting torch for thick steel?

Not for the thickest steel in this comparison. A cutting torch cuts up to 8 in steel with a different tip, and the ARCCAPTAIN set cuts 6 in carbon steel. A plasma cutter suits thin sheet and clean cuts in the shop, so keep the torch for thick steel and farm work.

Related: best plasma cutter, cutting torch tip sizes, oxy acetylene torch types, and the plasma cutters hub. Also see our plasma cutter safety.

More buying guides