Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Heavy Duty Metal Cutting Hole Saw (2026): 5 Picks Compared

Five hole saws and kits for cutting heavy metal, compared on size range, cutting depth, tooth design and the materials each maker lists.

Best Heavy Duty Metal Cutting Hole Saw (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1EZARC 30 Piece KitBest OverallEZARC 30 Piece Kit9.6/10View on Amazon
  2. 2DECKRKAT 4 Inch TCT Hole SawBest Single SawDECKRKAT 4 Inch TCT Hole Saw9.6/10View on Amazon
  3. 3dashap 20 Piece TCT KitBest TCT Kitdashap 20 Piece TCT Kit9.6/10View on Amazon
  4. 4Yougfin 18 Piece KitMost Compact KitYougfin 18 Piece Kit9.5/10View on Amazon

A bracket needs a round hole for a cable gland, a panel needs a clean opening for a switch, and a twist bit only wanders off the mark and leaves a ragged edge. The best heavy duty metal cutting hole saw cuts that hole with a steady pilot bit and teeth that hold an edge in hard metal.

This guide compares five hole saws and kits on what each listing states: size range, cutting depth, tooth design and the materials each maker names.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall EZARC 30 Piece Kit: 24 hole saw sizes from 3/4 to 4-1/2 inches, 8% cobalt M42 bi-metal, 4/6 TPI and a stated 1.89 inch cutting depth. Check price on Amazon
  • Best Single Saw DECKRKAT 4 Inch TCT Hole Saw: A single 4 inch TCT saw with a spring-loaded pilot bit and a 3/8 inch 3-flatted shank for stainless steel and other hard metal. Check price on Amazon
  • Best TCT Kit dashap 20 Piece TCT Kit: 20 carbide saws from 5/8 to 3-15/16 inches, stated to cut metal up to 28 mm thick. Check price on Amazon
  • Most Compact Kit Yougfin 18 Piece Kit: 18 M42 bi-metal saws from 3/4 to 2-1/2 inches with mandrels, drill bits and hex keys in a portable carrying case. Check price on Amazon

The machines

EZARC 30PCS Bi-Metal Hole Saw Kit, 3/4"-4-1/2"

EZARC 30PCS Bi-Metal Hole Saw Kit, 3/4"-4-1/2"

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30 piece M42 bi-metal kit with 24 hole saw sizes from 3/4 to 4-1/2 inches, 8% cobalt teeth, a 7/16 inch arbor and a stated 1.89 inch cutting depth.

Pros

  • 24 hole saw sizes from 3/4 to 4-1/2 inches in one case
  • M42 bi-metal with 8% cobalt and a 4/6 TPI variable tooth design
  • Stated cutting depth of 1.89 inches (48 mm)
  • Eject slots for chip removal, with a heavy-duty case, clear lid and size labels

Cons

  • The maker names thin metals only, alongside softwood, plywood, plastic sheets, drywall and PVC boards
  • Four pilot drills and one hex key shared across 24 saws
  • Needs a drill that fits a 7/16 inch arbor
  • No warranty term is stated
4" TCT Hole Saw for Hard Metal

4" TCT Hole Saw for Hard Metal

DECKRKAT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single 4 inch TCT hole saw with a spring-loaded pilot drill bit, a 3/8 inch 3-flatted shank and a stated 1 inch cutting length.

Pros

  • Tungsten carbide tipped teeth for stainless steel, high alloy steel, copper and other hard materials
  • Spring-loaded pilot drill bit for easy debris removal
  • 3/8 inch 3-flatted shank for drills and CNC drilling machines
  • Pre-oiled in a sturdy plastic case, with a hex wrench included

Cons

  • One size only at 4 inches, so other hole sizes need other saws
  • A 1 inch cutting length limits deeper cuts
  • Needs cutting oil as a lubricant, per the maker
  • No warranty term is stated
dashap 20Pcs TCT Carbide Hole Saw Kit with 4 Drill

dashap 20Pcs TCT Carbide Hole Saw Kit with 4 Drill

dashap9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 piece TCT carbide kit with saws from 5/8 to 3-15/16 inches, 4 drill bits and hex keys, stated to cut metal up to 28 mm thick.

Pros

  • 20 carbide tipped saws from 5/8 to 3-15/16 inches
  • Stated to cut metal up to 28 mm thick, including stainless steel, iron and aluminum
  • Double-circle design for chip removal and cooling
  • The maker offers a reply within 24 hours for questions

Cons

  • Cutting depth is not stated, only a maximum metal thickness of 28 mm
  • Four drill bits shared across 20 saws
  • Needs coolant for best performance, per the maker
  • Largest saw is 3-15/16 inches, smaller than the largest size in this guide
dashap 27PCS Hole Saw Kit with Drill Bits

dashap 27PCS Hole Saw Kit with Drill Bits

dashap9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 27 piece tungsten carbide set with 23 hole saws from 5/8 to 3-15/16 inches, drill bits, hex keys and an ejection spring, in a red carrying box.

Pros

  • 23 hole saws from 5/8 to 3-15/16 inches in one red carrying box
  • Ejection spring pushes slugs out of the cup
  • Stated to cut 3 mm stainless steel, 15 mm iron plate and 15 mm aluminum alloy
  • Fits rechargeable drills, portable hand drills, bench drills and electric drills, per the maker

Cons

  • Cutting depth is not stated
  • Needs oil or coolant while drilling at high speeds, per the maker
  • Largest saw is 3-15/16 inches, smaller than the largest size in this guide
  • A 27 piece set needs more storage space than a single saw
Yougfin Hole Saw Kit, 18-Piece Hole Saw Set

Yougfin Hole Saw Kit, 18-Piece Hole Saw Set

Yougfin9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18 piece M42 bi-metal kit with hole saws from 3/4 to 2-1/2 inches, mandrels, drill bits and hex keys in a portable carrying case.

Pros

  • M42 high-speed steel cutting edge on bi-metal cups
  • Offset slots for easy plug removal from the cup
  • Serrated edge stated to cut with less vibration
  • Portable carrying case keeps 18 pieces organized

Cons

  • Suits thin metals only among metals, with plastic, wood-based items, plywood, drywall and soft plaster also named
  • Smallest size range here, 3/4 to 2-1/2 inches
  • No cutting depth is stated
  • No maximum metal thickness is stated

Spec sheet comparison

Model Gear Score Sizes Max cut Pieces Type
EZARC 30 Piece Kit 9.6/10 3/4 to 4-1/2 in, 24 sizes 1.89 in depth 30 M42 bi-metal, 8% cobalt
DECKRKAT 4 Inch TCT Hole Saw 9.6/10 4 in (100 mm) 1 in length 1 TCT carbide
dashap 20 Piece TCT Kit 9.6/10 5/8 to 3-15/16 in, 20 sizes 28 mm metal 20 saws, 4 bits TCT carbide
dashap 27 Piece Kit 9.5/10 5/8 to 3-15/16 in, 23 sizes 3 mm stainless, 15 mm iron 27 Tungsten carbide
Yougfin 18 Piece Kit 9.5/10 3/4 to 2-1/2 in Not stated 18 M42 bi-metal

All specs here repeat what the maker rates and the listing prints, copied down 21 November 2026.

How to pick the best heavy duty metal cutting hole saw

Size range

Size range decides whether one kit covers the holes the shop cuts. The EZARC kit holds 24 sizes from 3/4 to 4-1/2 inches, the widest span here. Both dashap kits run from 5/8 to 3-15/16 inches, with 23 saws in the 27 piece kit and 20 saws in the 20 piece kit. Yougfin covers 3/4 to 2-1/2 inches, and the DECKRKAT saw cuts a single size, 4 inches, so it suits a reader who cuts that hole often.

Cutting depth and thickness

Depth decides whether the saw gets through the metal in a pass. EZARC states a cutting depth of 1.89 inches (48 mm), and DECKRKAT states a cutting length of 1 inch. The dashap 20 piece kit states it cuts metal up to 28 mm thick, and the dashap 27 piece kit states 3 mm stainless steel, 15 mm iron plate and 15 mm aluminum alloy. Yougfin states no cutting depth.

Tooth design and material

Three picks use tungsten carbide tipped teeth: the DECKRKAT saw and both dashap kits. Two picks use M42 bi-metal: EZARC adds 8% cobalt with a 4/6 TPI variable tooth design, and Yougfin uses a high-speed steel cutting edge. Carbide suits hard metal such as stainless steel and high alloy steel, while bi-metal suits mixed shop work across metal, wood and plastic as the makers list it. EZARC adds all-access eject slots, the dashap 27 piece kit uses an ejection spring, Yougfin uses offset slots, and the dashap 20 piece kit uses a double-circle design, all aimed at clearing chips and plugs from the cup.

Shank, arbor and pilot bits

The shank or arbor must fit the drill. DECKRKAT uses a 3/8 inch 3-flatted shank, the dashap 27 piece kit uses a 1/4 inch shank, and EZARC uses a 7/16 inch arbor. DECKRKAT adds a spring-loaded pilot drill bit, EZARC includes 4 pilot drills, and both dashap kits include 4 drill bits. Check the shank size against the drill chuck before ordering.

Cases and storage

A case keeps teeth from chipping in a drawer and keeps sizes in order. DECKRKAT ships pre-oiled in a sturdy plastic case, the dashap 27 piece kit comes in a red carrying box, and Yougfin comes in a portable carrying case. EZARC uses a heavy-duty case with a latch, dedicated slots for each tool and a clear lid with size labels. Keep the case latched and the saws dry between jobs.

Use as directed. Clamp the work before cutting, wear eye protection, keep guards in place and keep hands clear of the spinning cup, with no gloves near rotating parts. Use cutting oil or coolant as the maker directs and start slow with the pilot bit. See the OSHA machine guarding guidance and our Safety Disclaimer.

Before You Strike an Arc

  • Check the shank or arbor fits the drill, and check the pilot bit and hex key are tight before the first cut.
  • Clamp the work, keep guards in place, wear eye protection and keep gloves away from rotating parts.
  • Use the drill type the maker names, such as a bench drill or a portable hand drill.
  • Have cutting oil or coolant ready when the maker calls for it.
  • Check the case on arrival and confirm the sizes and pieces match what the maker lists.

FAQ for welders

What size hole saw do I need for cutting metal?

Measure the hole the fitting or fastener needs, then pick a saw at that diameter. The kits here cover 5/8 to 4-1/2 inches across the guide, with the EZARC kit holding the widest span at 24 sizes from 3/4 to 4-1/2 inches. A single saw suits a reader who cuts the same hole often, while a kit suits a shop that cuts many sizes.

Can a hole saw cut stainless steel?

Yes, when the maker lists stainless steel for that saw. The DECKRKAT saw and both dashap kits list stainless steel, and the dashap 27 piece kit states 3 mm stainless steel. Start slow with the pilot bit and use cutting oil or coolant as the maker directs.

What is the difference between TCT and bi-metal hole saws?

TCT means tungsten carbide tipped teeth, as on the DECKRKAT saw and both dashap kits, and it suits hard metal such as stainless steel and high alloy steel. Bi-metal means a high-speed steel cutting edge on a bi-metal cup, as on the Yougfin kit, with EZARC adding 8% cobalt and a 4/6 TPI variable tooth design. Carbide suits hard metal work, while bi-metal suits mixed materials as the makers list them.

Do I need cutting oil when cutting metal with a hole saw?

Yes for the saws here that call for it. DECKRKAT directs cutting oil as a lubricant to prevent burning or breaking the bit, the dashap 27 piece kit directs oil or coolant at high speeds, and the dashap 20 piece kit directs coolant for best performance. Keep oil or coolant at the bench and add it as the maker directs.

How deep can a hole saw cut?

It depends on the saw. EZARC states a cutting depth of 1.89 inches (48 mm), DECKRKAT states a cutting length of 1 inch, and the dashap 20 piece kit states metal up to 28 mm thick. Yougfin and the dashap 27 piece kit state no cutting depth.

Related: best hole saw for metal, best hole saw for stainless steel, cobalt vs bi-metal hole saw, and the metal saws hub. Also see our best hole saw arbor. Also see our best hole saw for sheet metal. Also see our best cutting fluid for steel. Also see our metalworking machines hub.

Scoring, line by line

Each saw is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety standard or a warranty term, so every pick scores zero on safety and warranty, and the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
EZARC 30 Piece Kit 9.6 30 21 21 n/a 0
DECKRKAT 4 Inch TCT Hole Saw 9.6 29 21 20 n/a 0
dashap 20 Piece TCT Kit 9.6 28 20 21 n/a 0
dashap 27 Piece Kit 9.5 28 19 20 n/a 0
Yougfin 18 Piece Kit 9.5 27 19 20 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides