Wilton 11104 Review: Pros, Cons & Who It’s For
A Wilton 11104 review from the listing: a 4 in. cast iron bench vise with a 120° swivel base, its specs, listing gaps and who it suits.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Wilton General Purpose Bench Vise, 4" Jaw Width9.6/10View on Amazon - 2
Wilton Low-Profile Drill Press ViseView on Amazon - 3
Wilton Mechanics Bench ViseView on Amazon - 4
Wilton Super-Junior Clamp-On ViseView on Amazon
When you are clamping angle iron for a bevel, holding flat bar steady for fit-up, or securing small brackets while you grind off mill scale, a dependable bench vise is what keeps the work from slipping. Bench vises on welding and fabrication benches take steady abuse from clamping pressure, grinder vibration, and spatter. This Wilton 11104 review examines Wilton’s 4 in. general-purpose bench vise to see what its published specifications mean for home fabricators and garage shops. We have not used this vise ourselves; this review is based on Wilton’s Amazon listing for the 11104 and the specs published there.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The vise

Wilton General Purpose Bench Vise, 4" Jaw Width
A 4 in. bench vise built from 30,000 PSI gray cast iron with a 3 in. max jaw opening, 2-1/4 in. throat depth, 120° swivel base with double lockdowns, replaceable serrated steel jaws, and a lifetime warranty.
Pros
- Body cast from 30,000 PSI gray iron with an anvil work surface
- Swivel base rotates 120° with double lockdowns for positioning
- Replaceable hardened steel jaw inserts with machine serrations
- Backed by a lifetime warranty against manufacturing defects
Cons
- Conflicting weights listed: 16 lbs net weight versus 15 pounds item weight
- Listing does not state mounting hole dimensions or include mounting hardware
- Lacks integrated pipe jaws for clamping round tubing and conduit
Other welders and gear to compare
Wilton Low-Profile Drill Press ViseCheck price on Amazon
Wilton Mechanics Bench ViseCheck price on Amazon
Wilton Super-Junior Clamp-On ViseCheck price on Amazon
Wilton 11104 review: the short verdict
The Wilton 11104 is a compact bench vise built from 30,000 PSI gray cast iron, designed for light-duty metal fabrication, general shop maintenance, and assembly tasks. It features a 4 in. jaw width, a 3 in. maximum jaw opening, and a 2-1/4 in. throat depth, which suits smaller stock, brackets, and bench-top fabrication projects.
Key listed features anchor its appeal. The swivel base rotates 120° with double lockdowns, giving you flexibility to angle workpieces for grinder or torch access. The hardened steel jaw inserts are machine serrated for a firm grip and replaceable when worn. Wilton backs the vise with a lifetime warranty against manufacturing defects.
The main drawbacks come from listing contradictions and material limits. The spec table lists the style as Industrial, yet the bullet points state it is intended for light-duty use, home shops, and weekend projects. The listing also gives conflicting weights: 16 lbs net weight in the spec table and 15 pounds item weight in the details. Gray cast iron at 30,000 PSI tensile strength handles steady clamping, but it will not tolerate heavy sledgehammer blows or severe bending forces.
Key specs
| Model | Jaw Width | Max Opening | Throat Depth |
|---|---|---|---|
| Wilton 11104 | 4 in. | 3 in. | 2-1/4 in. |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 14 October 2026. Jaw width is the span across the clamping face, max opening is the widest gap between open jaws, and throat depth is the clearance from the top of the jaws down to the slide body.
What the Wilton 11104 does well
Cast iron body for everyday clamping
The body is cast from 30,000 PSI gray cast iron. For general metalworking, positioning parts for a tack weld, or holding flat stock while cutting, this material provides rigid clamping without excessive flex. Gray iron absorbs vibration well when filing, deburring, or wire-wheeling small fabrications. As long as you respect the light-duty rating and avoid heavy pounding, the casting provides a solid foundation on a welding table for a home shop.
Swivel base with double lockdowns
The base rotates through 120° of movement, providing angle adjustment when beveling or welding small assemblies. Wilton includes double lockdowns on the swivel base, securing the ring at two points to resist twisting under lateral working loads. Once locked down, the vise holds its angle while you fit joints or clean up cut edges with an angle grinder for welding prep.
Replaceable serrated jaw inserts
The clamping faces feature hardened steel jaw inserts with machine serrations. These serrations bite into mill scale, angle iron, and bar stock to keep pieces from twisting when you apply torque. Because the inserts are replaceable, you can unbolt them if they wear down or replace them with soft aluminum or copper caps when clamping finished parts that cannot tolerate surface marks. Our overview of types of welding clamps explains when a fixed bench vise works better than portable clamping tools.
Anvil work surface and lifetime warranty
Behind the fixed jaw, the casting includes an anvil work surface designed for light forming, peening rivets, and flattening small brackets. Backing up the tool is Wilton’s lifetime warranty against manufacturing defects, which gives buyers peace of mind regarding factory quality. In a market crowded with disposable hardware, brand backing with a stated warranty term adds real value for a home workshop.
Limitations
- Conflicting weight listings: the spec table lists a net weight of 16 lbs, while the product details list an item weight of 15 pounds. Buyers comparing bench weight or mounting load should note this discrepancy.
- Industrial label contradicts light-duty rating: the spec table assigns an Industrial style name, but the listing bullet points explicitly classify the vise for light-duty use, home shops, and weekend projects. It is not built for heavy fab shops.
- Gray cast iron limits: gray cast iron at 30,000 PSI tensile strength is brittle under severe impact. Pounding heavy plate or striking the anvil with a heavy hammer can fracture the casting.
- No mounting hardware or pattern stated: the listing includes only the bench vise itself. It does not state mounting hole spacing, hole diameter, or bolt sizes, so you must measure the base before drilling your benchtop.
- Limited swivel range and no pipe jaws: the base rotates only 120° rather than swinging full circle or parallel to the bench edge, and the listing does not include pipe jaws for holding round tubing.
How we scored it
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Wilton 11104 | 9.6 | 28 | 19 | 21 | n/a | 4 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
The Gear Score weighs performance, build, value, safety and warranty based on published listing data, as detailed in our shop equipment reviews. The Wilton 11104 scores solidly on performance for general bench tasks and earns a strong mark for its stated lifetime warranty. Build is held back by the conflicting weight numbers and the light-duty cast iron construction. Safety scores zero because safety standards and certifications apply to electrical machinery and PPE rather than manual bench vises, so none are listed.
Who should buy the Wilton 11104, and who should skip it
Buy it if
- You need a compact 4 in. bench vise for home shop repairs, light metal fabrication, and weekend projects.
- You want a 120° swivel base with double lockdowns for adjustable working angles on small assemblies.
- You value replaceable serrated jaws and a stated lifetime warranty against manufacturing defects.
- Your work involves clamping flat bar, small angle iron, and brackets rather than heavy structural beams.
Skip it if
- You run a heavy commercial fabrication business requiring ductile iron or forged steel construction.
- You need to swing long stock completely parallel to the bench edge, which requires a wider swivel arc than 120°.
- You require built-in pipe jaws to clamp conduit and round pipe without slipping.
- You want a dedicated heavy-duty vise; see our best welding vise for table guide for heavier options.
Before You Strike an Arc
- Inspect the casting and slide channels upon arrival for shipping cracks, casting flaws, or uneven machine surfaces.
- Mount the base securely to a solid metal table or hardwood bench using through-bolts that match the base holes, because mounting hardware is not included.
- Loosen the double lockdowns on the swivel base to confirm the assembly pivots smoothly across its 120° rotational range before tightening.
- Check the hardened steel jaw inserts with a square to ensure the serrated faces meet evenly when closed under handle torque.
- Clean factory packing oil off the jaw faces and anvil area before tacking nearby, so heat does not burn residual grease.
Alternatives
- Heavier shop vise: if you need a larger clamping capacity from the same maker, our Wilton WS8 review covers a heavy-duty shop vise.
- Comparable compact model: our Yost LV-4 review evaluates another compact bench vise option for home garages.
- Drill press clamping: if you need work-holding specifically for drilling operations, check our best drill press vise guide.
- Portable fabricator clamps: when securing metal directly to a fixture table, consider best heavy duty welding clamps instead of a fixed vise.
FAQ for welders
Is the Wilton 11104 suitable for welding and metal fabrication?
The Wilton 11104 handles light welding fit-up, holding flat bar, and securing small assemblies for tack welds. Because it is cast from 30,000 PSI gray iron rather than forged steel or ductile iron, heavy pounding with a sledgehammer can crack the body. Keep striking work light on the anvil and use it primarily for holding parts steady.
Can you replace the jaws on the Wilton 11104?
Yes. The listing states that the 11104 includes replaceable hardened steel jaw inserts with machine serrations. If the teeth wear down or you need smooth copper or aluminum jaw caps to prevent marring finished metal, you can unbolt the inserts and swap them.
How far does the Wilton 11104 swivel?
The listing states that the swivel base rotates 120° and secures with double lockdowns. This rotation provides partial angle adjustment for torch or grinder clearance. It does not rotate full circle or parallel to the bench edge, so check bench clearance before drilling mounting holes.
What is the warranty on the Wilton 11104?
Wilton provides a lifetime warranty against manufacturing defects on the 11104 bench vise. This covers defects in materials and factory workmanship under normal shop use. It does not cover damage caused by abuse, such as hammering on the spindle handle with a cheater pipe.
Does the Wilton 11104 include mounting hardware?
No. The listing states that the included component is only the bench vise itself. You will need to supply mounting bolts, washers, and nuts suited to your specific workbench thickness and hole pattern.
Related: best welding vise for table, Wilton WS8 review, Yost LV-4 review, and the welding tables and carts hub.




