Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Torch Tips: Types and Replacement Guide

MIG contact tips, cutting tips and gas welding tips compared, with how to match each one to its torch and when to swap a worn tip.

Welding Torch Tips: Types and Replacement Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Light Duty Welding/Brazing Torch Kit for Victor JLight Duty Welding/Brazing Torch Kit for Victor J9.6/10View on Amazon
  2. 22PK 2-1-101 Acetylene Cutting Torch Tips2PK 2-1-101 Acetylene Cutting Torch Tips9.5/10View on Amazon
  3. 3VEVOR Air Acetylene Torch Kit 149in Hose 2 TipsVEVOR Air Acetylene Torch Kit 149in Hose 2 Tips9.5/10View on Amazon
  4. 4Welding Knight MB15 15AK MIG Welding Torch KitWelding Knight MB15 15AK MIG Welding Torch Kit9.5/10View on Amazon

A MIG gun that sputters and spits, a cutting torch that leaves a ragged edge, a brazing joint that will not wet out: a worn or wrong tip sits behind each of these. Welding torch tips are the consumable parts at the working end of the torch, the contact tips, cutting nozzles and gas welding tips that shape the arc or the flame and feed wire or gas to the joint. This guide explains the types, how to match a tip to a torch, and when to swap a worn tip, with kits below that cover MIG, cutting and gas welding work.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Light Duty Welding/Brazing Torch Kit for Victor J

Light Duty Welding/Brazing Torch Kit for Victor J

ADsunves9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A light duty oxy-acetylene welding and brazing kit with a J-28 handle, 3 W-J series tips, a flashback arrestor, a striker and a tip cleaner.

Pros

  • Built-in flashback arrestor blocks reverse gas flow
  • 3 W-J series welding tips in sizes 0, 1 and 2
  • Fits MC acetylene tanks with CGA-200 valves and oxygen tanks with CGA-540 valves
  • Striker and tip cleaner included in the kit

Cons

  • No warranty term is stated
  • Light duty only, per the listing title
  • No bore size or thickness range is stated for the tips
2PK 2-1-101 Acetylene Cutting Torch Tips

2PK 2-1-101 Acetylene Cutting Torch Tips

Pidnsrozo9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Acetylene cutting tips in the 1-101 series for Victor-style heavy duty torches, with a torch cleaner named in the kit.

Pros

  • 4 cutting tips covering sizes 0-1-101 through 3-1-101
  • Copper alloy tips with precision-machined orifices
  • Tight-sealing connection stated to prevent gas leakage
  • Heat-resistant base protects the torch from overheating

Cons

  • No warranty term is stated
  • No cutting thickness figures are stated
  • Torch cleaner is named in the title but not described in the bullets
VEVOR Air Acetylene Torch Kit 149in Hose 2 Tips

VEVOR Air Acetylene Torch Kit 149in Hose 2 Tips

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An air acetylene torch kit with a 149 inch hose, 2 brass welding tips and a CGA200 regulator for brazing and welding tasks.

Pros

  • 149 inch flame-resistant rubber hose
  • 2 brass welding tips, A-3 and A-11, with quick-detach switching
  • CGA200 regulator and torch handle included
  • Listed for automotive repairs, piping and metal furniture

Cons

  • Not suitable for B-type gas cylinders, per the listing
  • No warranty term is stated
  • No tip size range beyond A-3 and A-11 is stated
  • No duty or pressure figures are stated
Welding Knight MB15 15AK MIG Welding Torch Kit

Welding Knight MB15 15AK MIG Welding Torch Kit

Welding Knight9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14 piece MIG torch kit for MB15 15AK torches: 10 copper contact tips in 0.035 inch, 2 gas nozzles and 2 gas diffusers.

Pros

  • 10 copper contact tips in 0.035 inch for 0.9 mm wire
  • 2 gas nozzles and 2 gas diffusers complete the kit
  • Made for MB15 15AK MIG/MAG torches as a direct replacement
  • Counts are consistent across the title and the bullets

Cons

  • No warranty term is stated
  • Nozzle and diffuser material is not stated
  • Fits MB15 15AK torches only, per the listing
  • Only one wire size, 0.035 inch, is covered

Welding torch tips: the types that matter

MIG contact tips, cutting tips and gas welding tips cover most shop work, and each family fits a different torch. A MIG contact tip feeds wire through the gun and carries current to the wire, so its bore must match the wire size. A cutting tip shapes the preheat flame and the oxygen jet that cuts steel. A gas welding tip shapes the flame for welding, brazing and heating, and it screws onto a torch handle built for that gas mix.

  • MIG contact tips. The Welding Knight kit carries 10 copper contact tips in 0.035 inch for 0.9 mm wire, with 2 gas nozzles and 2 gas diffusers for MB15 15AK torches.
  • Cutting tips. The Pidnsrozo set covers the 1-101 series in sizes 0-1-101, 1-1-101, 2-1-101 and 3-1-101 for Victor-style heavy duty torches.
  • Gas welding and brazing tips. The ADsunves kit carries W-J series tips in sizes 0, 1 and 2, while the VEVOR kit (on Amazon) carries 2 brass tips, A-3 and A-11, on a 149 inch hose.

Welding torch tips side by side

Product Gear Score Tips in the kit Notes
ADsunves J-28 W-J Series 9.6/10 3 welding tips Flashback arrestor, striker and tip cleaner included
Pidnsrozo 2-1-101 9.5/10 4 cutting tips in sizes 0-3 Listing names 2PK in the title and 4 pieces in the bullets
VEVOR Air Acetylene Kit 9.5/10 2 welding tips 149 inch hose with CGA200 regulator
Welding Knight MB15 15AK 9.5/10 10 contact tips Plus 2 gas nozzles and 2 gas diffusers

The table lines up the kits in this guide by Gear Score, with the tip count and the note that sets each kit apart. The ADsunves kit leads on its flashback arrestor and its complete set of accessories, while the Welding Knight kit scores on a clear, consistent listing even though it states no safety feature.

The gear for each torch tip job

Each kit below handles one part of the work above: MIG wire feed, acetylene cutting, or gas welding and brazing.

How to match a tip to your torch

Fit comes before price or pack size. Check these points against your torch before ordering:

  • Match the series. MB15 15AK kits fit MB15 15AK torches, 1-101 series tips fit Victor-style heavy duty torches, and W-J series tips fit the J-28 handle.
  • Match the wire. A 0.035 inch contact tip suits 0.9 mm wire, the pairing the Welding Knight listing states.
  • Match the fittings. The J-28 handle uses 3/8-24 type A hose fittings, fits MC acetylene tanks with CGA-200 valves, and fits industrial oxygen tanks with CGA-540 valves.
  • Match the cylinder. The VEVOR kit is not suitable for B-type gas cylinders, per its listing.
  • Count the pieces on arrival. The Pidnsrozo listing names 2PK in the title, 4 pieces in the bullets and 1 item in the spec table, so confirm what arrived against the order.

When to swap a worn tip

The Welding Knight listing states that regular replacement of consumables is necessary to help improve welding efficiency and prevent undesirable conditions that result in unfused welds. Treat tips as wear parts and keep spares on hand: the kits here carry spares in the box, from 10 contact tips in the Welding Knight kit to the spare cutting tips in the Pidnsrozo set. Swap a tip when the bore wears oval, the arc wanders, or the flame will not hold steady, and check the nozzle and diffuser at the same time, since a worn nozzle changes gas coverage even with a fresh tip.

FAQ for welders

What size contact tip fits 0.035 inch wire?

A 0.035 inch tip. The Welding Knight kit pairs 0.035 inch copper contact tips with 0.9 mm wire for MB15 15AK torches, and the bore must match the wire so the tip feeds smoothly and carries current cleanly.

Do 1-101 cutting tips fit a Victor torch?

The Pidnsrozo tips (on Amazon) are made for Victor-style heavy duty torches in the 1-101 series, in sizes 0-1-101, 1-1-101, 2-1-101 and 3-1-101. Check your torch against that series before ordering, since a tip from another series will not seat the same way.

What does a flashback arrestor do?

It blocks reverse gas flow and isolates high-temperature flame, which keeps a flashback from reaching the hose and regulators. The ADsunves kit builds one into the J-28 handle, and it is the strongest safety feature stated in any kit in this guide.

Can one torch kit cover welding and brazing?

Yes, with the right gas mix and tips. The VEVOR air acetylene kit is listed for welding, brazing and a variety of metalworking tasks, and the ADsunves kit is listed for welding, brazing and heating work. Match the tip to the job: a welding tip shapes the flame for brazing, while a cutting tip shapes the oxygen jet for cutting.

How often should MIG contact tips be replaced?

There is no fixed interval in these listings. The Welding Knight listing states that regular replacement of consumables is necessary to help improve welding efficiency and prevent undesirable conditions that result in unfused welds, so keep spares in the box and swap a tip when the arc or the bead starts to suffer.

Related: MIG welding contact tips, MIG welding gun parts, gasless vs gas MIG welder, and the welding consumables hub.

More buying guides

Welding Consumables ·

Brazing Torch Tips: Types and Sizes Guide

Brazing torch tips come in one-flame, rosebud and multi-flame patterns, and the right one depends on the joint size, the metal thickness and the…

Welding Consumables ·

Oxy-Acetylene Torch Tips: Sizes and Uses

Oxy-acetylene torch tips come in cutting, welding, rosebud and brazing types, and the right one depends on the torch series, the tip size and…