Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Brazing Torch Tips: Types and Sizes Guide

Brazing torch tips come in one-flame, rosebud and multi-flame patterns, and the right one depends on the joint size, the metal thickness and the torch handle it must fit.

Brazing Torch Tips: Types and Sizes Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Flame King FK4500CGA High Intensity Propane Torch Head forFlame King FK4500CGA High Intensity Propane Torch Head for9.7/10View on Amazon
  2. 2BLUEFIRE MRS-7014B Trigger Start Gas Welding Torch Head forBLUEFIRE MRS-7014B Trigger Start Gas Welding Torch Head for9.6/10View on Amazon
  3. 3Propane Torch HeadPropane Torch Head9.6/10View on Amazon

A copper joint that will not take solder, a cracked bracket that needs a hot, even heat, or a small steel repair that calls for a focused flame all come down to the same small part: the tip on the end of the torch. Brazing torch tips shape the flame that heats the joint, and the wrong pattern leaves part of the joint cold while the rest overheats. This guide explains the patterns, the sizes and the handle fits, so the tip on the bench matches the work in hand.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

What brazing torch tips do

A torch tip meters fuel gas and oxygen into a flame of a set shape and size. The bore sets the gas flow, and the head sets how the flame spreads across the joint. A fine brazing tip throws a small, tight flame at one spot, while a heating tip spreads the flame wide so a broad area comes up to heat together. Most tips in the listings here are copper or copper alloy, and the tip is a consumable: the orifice wears, the flame goes ragged, and a fresh tip restores the pattern.

Brazing torch tips: sizes and what they cover

Size numbers run from fine to heavy, and the listings tie each size to a thickness range. The Pidnsrozo W-J set for Victor J Series handles holds sizes 1, 2 and 3: size 1 suits welding 2-10mm thin plates and fine brazing, size 2 suits joining 10-20mm metal parts, and size 3 covers heating and joining 20-30mm workpieces. At the fine end, the Pidnsrozo W-1 (on Amazon) set fits Victor 100 Series handles in sizes 000, 00 and 0, though the title names 000, 00 and 0 while the bullets describe sizes 1, 2 and 3, so check the size stamped on the tip before ordering.

The TYPE17-2 tip, listed by Pidnsrozo and by Uniweld, welds up to 1/8 inch metal and brazes 1 inch copper tubing. The Uniweld MTF-5 Cap’n Hook tip also brazes up to 1 inch copper tubing with five flames that wrap around the pipe. The A-32 air-acetylene tip soft solders copper tubing from 4 to 6 inches and silver brazes from 1-1/2 to 4 inches. Match the tip to the thickest part of the joint: a large tip on a small joint overheats the work, and a small tip on a heavy joint never brings it up to heat.

Flame patterns: rosebud, multi-flame and swirl

A rosebud tip trades a tight flame for spread. The Pidnsrozo 4-MFA-1 rosebud tip (on Amazon) for Victor 100C, WH26 and WH260 handles uses evenly spaced flame orifices to throw a high-temperature swirl flame across a wide area, which suits heating, straightening and brazing jobs where the whole joint must come up to heat at once. The tip is heat-resistant copper and weighs 0.1 pounds.

A multi-flame tip splits the gas across several outlets so the pipe heats from all sides at once. The Pidnsrozo MTF-5 (on Amazon) lists five flames at 5600 degrees Fahrenheit for Uniweld 71 and WH550 handles, built from brass and stainless steel. The Uniweld MTF-5 Cap’n Hook tip adds a hooked stainless steel tip that protects against bending, a brass mixer and nut, and a one year warranty. The A-32 air-acetylene tip needs no oxygen tank, connects with a quick-connect fitting to G-4 or PLF-A5 handles, and its orifice screw comes out for cleaning. It weighs 0.46 pounds.

Side by side

Standard welding tip Rosebud heating tip Multi-flame brazing tip Air-acetylene tip
Flame One tight, focused flame Wide swirl flame from spaced orifices Five flames around the joint One swirl flame, no oxygen tank
Handle fit Victor J Series or 100 Series, by size Victor 100C, WH26 or WH260 Uniweld 71 or WH550 G-4 or PLF-A5, quick connect
Copper pipe brazing Up to 1 inch with a TYPE17-2 tip Broad heating, not fine brazing Up to 1 inch with the MTF-5 Silver braze 1-1/2 to 4 inches
Thin plate welding 2 to 10 mm with a size 1 W-J tip Not a fine welding tip Light welding work Not a thin-plate welding tip
Fuel Oxy-acetylene Oxy-acetylene Oxy-acetylene Air-acetylene

The table shows the trade at a glance: tight flames suit small joints, wide flames suit broad heat, and the handle fit decides which tips are even an option. A tip that will not thread onto the handle in the shop is no use, whatever its flame pattern promises.

Matching a tip to a torch handle

Handle fit is where most wrong orders happen. W-J tips fit Victor J Series light-duty handles only, and will not fit Victor 100 or 300 Series handles. W-1 tips fit Victor 100 Series handles only, and will not fit 300 Series or J Series handles. The 4-MFA-1 rosebud tip fits Victor 100C, WH26 and WH260 handles. MTF-5 and TYPE17-2 tips fit Uniweld 71 and WH550 handles, and the A-32 tip fits G-4 or PLF-A5 handles with a quick-connect fitting.

Check the thread and the handle model before ordering. The Uniweld TYPE17-2 (on Amazon) needs only hand tightening on the tip nut, so tip changes need no extra tools. Keep a spare of the size used most, since a worn tip is the usual cause of a flame that will not hold steady.

Fuel gases

Most of the tips here run on oxy-acetylene. The Uniweld TYPE17-2 listing also names acetylene, propane, MAP//Pro and natural gas, and the Pidnsrozo W-J listing names acetylene and natural gas. The A-32 runs on air and acetylene with no oxygen tank, which suits work on site. Fuel choice changes the flame, not the joint: the filler metal and the flux still decide whether the joint holds, and the tip still decides where the heat goes.

Care, wear and spares

Copper tips wear at the orifice, and a worn orifice throws a ragged flame. Clean the tip with a tip cleaner made for the orifice size, and never ream the hole larger to clear it. The A-32 tip helps here: its orifice screw removes for cleaning. Store tips where the threads and orifices cannot pick up dirt, and check the seal at the handle before lighting up.

The Pidnsrozo W-J listing claims a service life extended by more than 30 percent over similar products, which the maker puts down to high-purity copper and precision machining. Treat that as the maker’s claim. The Uniweld MTF-5 carries a one year warranty, and the Uniweld TYPE17-2 carries 2 years from the manufactured date code or 1 year from the date of sale. The Pidnsrozo listings state no warranty term. Eye protection belongs at the torch whenever the flame is lit; see the guide to welding goggles for brazing for shade and fit.

For more options, see our welding consumables guides.

FAQ for welders

What size brazing torch tip suits the joint?

Match the tip to the thickest part of the joint. In the W-J range, size 1 covers 2-10mm thin plates, size 2 covers 10-20mm parts, and size 3 covers 20-30mm workpieces. A TYPE17-2 or MTF-5 tip brazes up to 1 inch copper tubing, while the A-32 soft solders 4 to 6 inch tubing and silver brazes 1-1/2 to 4 inch tubing.

Can a brazing torch tip weld steel?

Some can, within limits. The TYPE17-2 tip welds up to 1/8 inch metal, and the W-J size 1 tip welds 2-10mm thin plates. A rosebud tip is a poor choice for welding: its wide flame heats too broad an area for a controlled weld puddle.

What is a rosebud torch tip for?

A rosebud tip heats a broad area evenly, for bending, straightening, preheating and brazing large joints. The 4-MFA-1 spreads its flame through evenly spaced orifices, which brings a wide joint up to heat together instead of scorching one spot.

Do brazing torch tips fit any torch handle?

No. Tips fit a handle family. W-J tips fit Victor J Series handles only, W-1 tips fit Victor 100 Series handles only, the 4-MFA-1 fits Victor 100C, WH26 and WH260 handles, MTF-5 and TYPE17-2 tips fit Uniweld 71 and WH550 handles, and the A-32 tip fits G-4 or PLF-A5 handles.

Can a propane torch braze instead of oxy-acetylene?

Yes, with the right tip and filler. The A-32 air-acetylene tip needs no oxygen tank, and the Uniweld TYPE17-2 listing names propane among its fuel gases. A propane setup heats more slowly than oxy-acetylene on heavy joints. See the guide to the best propane torch for brazing for setups built around that fuel.

Related: the best low temp brazing rod guide and the best copper welding rods roundup.

More buying guides

Welding Consumables ·

Best Brazing Torch Holder (2026)

Four magnetic and table-edge torch holders for TIG, MIG and plasma torches, scored on magnet strength, torch fit and build, with honest notes on…