Soldering Torch vs Brazing Torch: Which One Should You Buy?
The SuniqFyre head and the LEXIVON kit cover the soldering side, while the Aismrii hose set and the JZWELD handle cover the brazing side, and the listings split on flame, fuel, hose and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SuniqFyre Propane Torch Head, Upgraded 10,000 BTU9.7/10View on Amazon - 2
Propane Torch Hand Hose, Mapp Gas Torch,Hose9.5/10View on Amazon - 3
LEXIVON Butane Torch Multi-Function Kit9.5/10View on Amazon - 4
JZWELD Light Duty Welding Brazing Torch Kit9.5/10View on Amazon
Verdict. In this soldering torch vs brazing torch comparison, pick a soldering torch for precise work with a pencil flame or a bench kit, and a brazing torch for large diameter brazing with a vortex flame or for oxy-acetylene work. The SuniqFyre head leads the soldering side with a 10,000 BTU rating and a 3-year warranty, while the Aismrii set leads the brazing side with a 60-inch hose, a hook, a vortex flame and a rating for copper pipe up to 3/4 inch.
A copper joint that will not take solder and a brazing joint that will not flow both start with the same question: whether the torch puts enough heat where the joint needs it. The soldering side here is built around a focused pencil flame and a bench kit, while the brazing side is built around a vortex flame for large diameter brazing and a light duty oxy-acetylene handle. This soldering torch vs brazing torch comparison puts two listings from each side against each other, using what each listing states about flame, fuel, hose and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The Four Torches

SuniqFyre Propane Torch Head, Upgraded 10,000 BTU
A 10,000 BTU propane torch head with a built-in regulator, flame lock and 360-degree all-angle burn, rated for copper pipe up to 3/4 inch and backed by a 3-year warranty.
Pros
- 10,000 BTU output with a focused pencil flame for precise soldering
- 100% instant ignition with a built-in regulator and flame lock
- 360-degree all-angle burn, with continuous inverted burning for up to 30 minutes
- 3-year manufacturer warranty, the only stated warranty here
Cons
- Fuel cylinder is not included
- No hose is included or stated, so reach is limited to the cylinder
- At 1.48 pounds it is the heaviest listing here
- No working temperature is stated, only a 10,000 BTU rating

Propane Torch Hand Hose, Mapp Gas Torch,Hose
A propane torch hand set with a 1.5-meter hose, a vortex flame and a working temperature of 1300 °C on ordinary fuel, rated for copper pipes up to 3/4 inch.
Pros
- Vortex flame for large diameter brazing, with a working temperature of 1300 °C on ordinary fuel
- 1.5-meter hose listed as 60 inches, with a metal hook for hanging the cylinder
- CGA600 connection for propane, MAPP and MAP-PRO cylinders
- Rated for copper pipes up to 3/4 inch
Cons
- No warranty term is stated
- Gas cylinder is not included and must be bought separately
- Higher temperatures need oxygen for combustion assistance, which the kit does not include
- Not for extended use in enclosed spaces, per the listing

LEXIVON Butane Torch Multi-Function Kit
A 12-piece butane torch kit with an adjustable flame from 1/2 inch to 2 inches, a working temperature up to 2400° F and a refillable metal tank.
Pros
- Adjustable flame from 1/2 inch to 2 inches, with a working temperature up to 2400° F
- Up to 2-hours run time, with a refill listed at 15 seconds
- 100% metal refillable tank with an attachable base stand for hands-free use
- Ignition stopper built to meet U.S. CPSC child resistance standard requirements
Cons
- No warranty term is stated
- Butane is not included
- No stated BTU rating or pipe size in the listing
- The 125-Watt Equivalent rating in the title is not explained in the listing

JZWELD Light Duty Welding Brazing Torch Kit
A light duty brazing torch handle kit with 3 welding tips, 1 flint striker, a built-in flashback arrestor and check valves, for MC acetylene and industrial oxygen tanks.
Pros
- Built-in flashback arrestor and check valves against flashback and backflow
- 3 welding tips and 1 flint striker included in the kit
- Fits MC acetylene tanks with CGA-200 valves and industrial oxygen tanks with CGA-540 valves
- Lowest weight of the four listings at 1.2 pounds
Cons
- Fits only 3/8 inch-24 Type A hose fittings; twin hoses with 9/16 inch-18 Type B fittings will not fit
- Will not fit disposable oxygen and fuel gas canisters
- No stated working temperature or flame rating in the listing
- Torch handle only, with no hose stated in the listing
Other welders and gear to compare
Propane Torch HeadCheck price on Amazon
MAPP/MAP/PROPANE Gas TorchCheck price on Amazon
Flame King FK8500CGA High Intensity Propane Torch Head forCheck price on Amazon
Flame King High Intensity Propane Torch Head with Bendable &Check price on Amazon
Brass Oxygen MAPP/Propane Welding TorchCheck price on Amazon
Bernzomatic FlameCommander Propane TorchCheck price on Amazon
Side by side
| Product | Flame and heat | Fuel | Hose and reach | Copper pipe | Weight | Warranty |
|---|---|---|---|---|---|---|
| SuniqFyre Propane Torch Head | 10,000 BTU pencil flame | Propane, MAPP, MAP-PRO, CGA600 | No hose stated | Up to 3/4 in | 1.48 pounds | 3-year manufacturer warranty |
| Aismrii Propane Torch Hand Hose | Vortex flame, 1300 °C | Propane, MAPP, MAP-PRO, CGA600 | 1.5 m, 60 in hose with hook | Up to 3/4 in | 1.3125 pounds | Not stated |
| LEXIVON Butane Torch Kit | Flame 1/2 in to 2 in, up to 2400° F | Butane, refillable tank | No hose, handheld kit | Not stated | 1.3 pounds | Not stated |
| JZWELD Light Duty Brazing Torch Kit | Light duty, no flame rating stated | Acetylene CGA-200, oxygen CGA-540 | No hose stated | Not stated | 1.2 pounds | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 13 November 2026. The SuniqFyre listing states a CSA certification, the Aismrii listing states CE and ISO9001 certifications, and the LEXIVON listing states a CPSC child resistance standard.
Soldering Torch vs Brazing Torch: Flame and Heat
The SuniqFyre head is rated at 10,000 BTU, up from 8,000 BTU in the maker’s earlier version, with a focused pencil flame and instant ignition. The LEXIVON kit adjusts its flame from 1/2 inch to 2 inches, with a working temperature up to 2400° F. On the brazing side, the Aismrii set uses a vortex flame at 1300 °C on ordinary fuel, and the JZWELD kit is a light duty set with 3 welding tips and no stated flame rating. The two sides state heat in different units, so the listings leave a direct heat comparison unclear; the split is the pencil flame for delicate soldering against the vortex flame for large diameter brazing.
Fuel and Fittings
The SuniqFyre head and the Aismrii set both use a standard CGA600 connection and take propane, MAPP and MAP-PRO cylinders. The LEXIVON kit runs on butane from a refillable metal tank, with up to 2-hours run time and a refill the maker lists at 15 seconds. The JZWELD handle is the odd one out: it fits only MC acetylene tanks with CGA-200 valves and industrial oxygen tanks with CGA-540 valves, not disposable oxygen and fuel gas canisters. Its hose fittings are 3/8 inch-24 Type A, and twin hoses with 9/16 inch-18 Type B fittings will not fit. See our Mapp gas vs propane brazing torch guide for the fuel side of the choice.
Weight and Build
The JZWELD kit has the lowest weight here at 1.2 pounds, and the LEXIVON kit follows at 1.3 pounds. The Aismrii set lists 1.3125 pounds, and the SuniqFyre head lists 1.48 pounds. The SuniqFyre head is built around a cast aluminum connector housing, a solid brass control valve and a heavy-duty stainless steel combustion tube. The LEXIVON kit uses a 100% metal refillable tank, and the Aismrii set adds a metal hook to hang the cylinder. The JZWELD handle carries a built-in flashback arrestor and check valves.
What Is in the Box
The LEXIVON kit is a 12-piece set with an attachable base stand for hands-free use. The Aismrii set ships with a torch head, a 1.5-meter hose and a hook, and the gas cylinder is bought separately. The JZWELD kit includes 3 welding tips and 1 flint striker. The SuniqFyre head is a torch head only, and the fuel cylinder is not included. None of the four listings includes a gas cylinder in the box.
Warranty
Only the SuniqFyre listing states a warranty: a 3-year manufacturer warranty, which is the main reason it scores highest here. The LEXIVON, Aismrii and JZWELD listings state no warranty term, so no warranty score is given for those three.
Choose a Soldering Torch If
- You want a focused pencil flame for delicate soldering.
- You want a butane kit with a stand for bench work.
- You solder plumbing copper pipe up to 3/4 inch.
- A stated warranty matters to you.
Choose a Brazing Torch If
- Your joints are large diameter copper pipe that need a vortex flame.
- You want a long hose so the cylinder can hang from a hook while you work.
- You already run MC acetylene and industrial oxygen tanks.
- You want a flashback arrestor and check valves built into the handle.
FAQ for welders
Which torch should you pick for soldering copper pipe?
For copper pipe up to 3/4 inch, the SuniqFyre head is the soldering-side listing here, with a pencil flame, a 10,000 BTU rating and a 3-year warranty. The LEXIVON kit suits smaller bench work with its adjustable flame and base stand.
Can a soldering torch braze?
The listings do not draw a clean line. The soldering-side LEXIVON kit lists a working temperature up to 2400° F, while the brazing-side Aismrii set lists 1300 °C on ordinary fuel, stated in different units, so temperature alone does not separate the two sides here. The Aismrii set is built for large diameter brazing with a vortex flame, while the LEXIVON kit is built for soldering and small work.
What fuel does each torch use?
The SuniqFyre head and the Aismrii set take propane, MAPP and MAP-PRO cylinders through a CGA600 connection. The LEXIVON kit runs on butane from its refillable tank. The JZWELD handle needs an MC acetylene tank with a CGA-200 valve and an industrial oxygen tank with a CGA-540 valve.
Does any torch here include a gas cylinder?
No. The SuniqFyre head, the LEXIVON kit and the Aismrii set all state that the fuel cylinder is not included, and the JZWELD kit lists only the handle, 3 welding tips and 1 flint striker in the package.
Which torch has the longest hose?
The Aismrii set, with a 1.5-meter hose listed as 60 inches, plus a metal hook. The other three listings state no hose length.
Related: Mapp gas vs propane brazing torch, brazing torch vs cutting torch, propane vs acetylene for brazing, butane vs propane torch, and flux coated vs bare brazing rod.
Scoring, line by line
All four torches are scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SuniqFyre Propane Torch Head | 9.7 | 30 | 21 | 20 | 8 | 4 |
| Aismrii Propane Torch Hand Hose | 9.5 | 29 | 20 | 20 | 5 | 0 |
| LEXIVON Butane Torch Kit | 9.5 | 28 | 20 | 20 | 5 | 0 |
| JZWELD Light Duty Brazing Torch Kit | 9.5 | 27 | 19 | 19 | 7 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.
Before you strike an arc. Work with good ventilation, clear anything flammable from the area, and keep an extinguisher close. Keep the cylinder upright during use and avoid extended use in enclosed spaces, as the Aismrii listing states. Check that the hose fittings match the handle before connecting gas, and confirm the cylinder valve matches the torch: CGA600 for the SuniqFyre head and the Aismrii set, CGA-200 and CGA-540 for the JZWELD handle. Wear eye protection and leather gloves.




