Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Size K Gas Cylinder: Dimensions, Fit and Storage

A size K gas cylinder is the large shop cylinder that feeds MIG shielding gas, and this guide explains the size, the fit, the storage and the rent-or-buy choice.

Size K Gas Cylinder: Dimensions, Fit and Storage
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Gas Cylinder Safety CapGas Cylinder Safety Cap9.7/10View on Amazon
  2. 280 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder Tank CGA 58080 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder Tank CGA 5809.6/10View on Amazon
  3. 3Pack of 2Pack of 29.5/10View on Amazon

The torch is set, the MIG gun is loaded with solid wire, and the regulator is waiting for a cylinder. That cylinder is often a size K gas cylinder, a large shop cylinder that feeds shielding gas to a MIG welder. This guide explains what the K size means, how it compares with the small propane cylinders sold for camping, what it runs, and how to store it upright and strapped in the shop.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

What a size K gas cylinder is

Gas cylinders come in letter sizes, and K is a large shop size. A size K gas cylinder is a tall steel cylinder that holds gas for welding, and it stands on the shop floor or rides on a welding cart next to the machine. The letter does not name the gas inside: the same K size can hold argon, carbon dioxide, a mix of argon and carbon dioxide, or other welding gases, and the label on the shoulder of the cylinder names the gas. What the letter tells you is the size class, so the supplier, the cart and the bracket all match the same cylinder.

The height, diameter and gas volume of a K cylinder vary by maker and gas, so this guide gives no figure for them. What is stated is the hardware around the cylinder: a wall bracket made for tanks in 7 or 9 inch diameters, and a strap to hold a cylinder upright. Measure your own cylinder and check the figures on its label before you buy hardware for it.

Size K side by side

Size K cylinder Small propane cylinder What changes
Size class Large shop cylinder 16 oz camping cylinder K holds far more gas
Wall bracket fit 7 or 9 inch tanks Not stated Measure the tank first
Securing strap 54 inch strap with the bracket Not stated Strap the cylinder upright
Bracket size 9.0 x 6.0 x 2.0 in Not stated Wall mounting saves floor space
Weight Not stated 1.0 lb listed Heavy; a cart or a bracket holds it upright
Pack Single cylinder Pack of 6 Small cylinders come in packs
Typical use MIG shielding gas in the shop Camp stoves and small burners Match the gas to the job

The bracket and strap figures are for a wall bracket made for tanks of 7 or 9 inch diameter, with a 54 inch securing strap. The small cylinder figures are for Bernzomatic 16 oz propane cylinders, sold as a pack of 6 with a listed weight of 1.0 lb.

What a K cylinder runs

A K cylinder usually feeds a MIG welder. The shielding gas flows from the cylinder through a regulator and a hose to the gun, where it shields the molten puddle from air while you weld. For mild steel the common choice is a mix of argon and carbon dioxide, often sold as C25, and straight carbon dioxide also sees shop use. Aluminum usually runs on pure argon. The gas your wire and machine manual recommend is the gas to use, and the flow rate comes from the machine manual or the door chart, not from a rule of thumb.

A K cylinder also feeds a TIG welder, which usually runs on argon, and it can feed a plasma cutter that takes compressed gas. Check the gas and the fitting your machine calls for before you order a cylinder, and see our best shielding gas for MIG welding and argon vs CO2 shielding gas guides.

How to tell a K from the smaller sizes

The simplest tell is the job it does. A K cylinder feeds a shop welder and lives on the floor or a cart. A 16 oz propane cylinder feeds a camp stove or a small burner and fits in a hand. The shoulder label names the gas and the size, and the supplier paperwork names the size too. A wall bracket made for 7 or 9 inch diameter tanks fits tanks of those diameters, so measure the cylinder and match the bracket to it.

  • Shoulder label. The gas and the size are stamped or labeled on the shoulder of the cylinder. Read that label before you order gas or hardware.
  • Valve and fitting. Different gases use different valve threads, so a regulator that fits one gas may not fit another. See our gas cylinder valve types guide.
  • Cart or bracket. A K cylinder needs a cart or a wall bracket with a strap. Our best welding cart guide covers carts that hold a machine and a cylinder.

Storing and moving a K cylinder

A full K cylinder is heavy, tall and under pressure, so treat it like shop equipment, not a spare part. Store it upright, chained or strapped to a wall bracket or a cart, with the safety cap on when it is not in use. A wall bracket made for a single cylinder of 7 or 9 inch diameter, with a 54 inch strap, holds the cylinder upright; a bracket of that kind measures 9.0 by 6.0 by 2.0 inches. Keep cylinders away from heat and out of the path of traffic, and never drop a cylinder or use a cylinder as a roller. See our gas cylinder safety cap guide.

Rent or buy

Most shops rent or lease large cylinders from a welding supplier and swap the empty for a full one, rather than owning the cylinder outright. Owning makes sense when you weld often and the supplier sells cylinders in your area. See our rent vs buy a welding gas cylinder guide for the trade-off, and our small vs large welding gas cylinder guide if you are choosing between sizes.

Before you rent or buy, check the valve thread and the gas your machine needs, and ask the supplier what size the exchange program stocks. A K cylinder is the common shop size, so most suppliers stock it, but confirm the size on the paperwork before you leave with a cylinder.

FAQ for welders

What gas goes in a size K cylinder?

The K is a size, not a gas. The same K size can hold argon, carbon dioxide, a mix of argon and carbon dioxide, or other welding gases. Read the gas name on the shoulder label before you connect a regulator.

How tall is a K cylinder?

The height varies by maker and gas, so no single figure covers every K cylinder. Measure the cylinder you have, or ask the supplier for the height of the size it stocks.

Can I lay a K cylinder on its side?

No. Store and use a K cylinder upright, chained or strapped to a wall bracket or a cart. A cylinder that falls can break its valve, and a broken valve turns the cylinder into a hazard.

Do I need a regulator for a K cylinder?

Yes. The gas flows from the cylinder through a regulator and a hose to the gun. See our best gas regulator for MIG welding guide for the regulator side.

Is a K cylinder the same as a 16 oz propane cylinder?

No. A 16 oz propane cylinder is a small camping cylinder, sold as a pack of 6, while a K cylinder is a large shop cylinder for welding gas. They take different valves, different regulators and different hardware.

Related: gas cylinder valve types, best welding cart, best gas regulator for MIG welding, and the welding consumables hub. Also see our small vs large welding gas cylinder guide.

More buying guides

Welding Consumables ·

Types of Gas Cylinder Used in Welding

The types of gas cylinder used in welding run from small refillable propane tanks for hand torches to large high-pressure cylinders for argon, oxygen,…

Welding Consumables ·

Gas Cylinder Valve Types for Welding

Gas cylinder valve types come down to the fitting on the cylinder: CGA580 and CGA320 inlets for welding gases, a type-1 connection for propane,…