Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Q Size Gas Cylinder: Dimensions and Sizing Guide

A Q size gas cylinder is sized by the cubic feet of gas it holds, and this guide compares the cylinders by capacity, size, weight, valve and gas so you can match one to your MIG or TIG work.

Q Size Gas Cylinder: Dimensions and Sizing Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR 60 Cu. Ft DOT Nitrogen Cylinder AluminumVEVOR 60 Cu. Ft DOT Nitrogen Cylinder Aluminum9.6/10View on Amazon
  2. 240 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder40 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder9.6/10View on Amazon
  3. 3New 125 cu ft Steel Inert Gas Cylinder with CGA580New 125 cu ft Steel Inert Gas Cylinder with CGA5809.6/10View on Amazon
  4. 420 cu ft Steel Argon Cylinder - CGA580 Valve20 cu ft Steel Argon Cylinder - CGA580 Valve9.5/10View on Amazon

A cart full of steel, a MIG gun in hand, and a regulator with nowhere to connect: the missing piece is the cylinder. A Q size gas cylinder is a size designation for a welding gas cylinder, and the number that matters most is its capacity in cubic feet. This guide explains how cylinder sizes are listed, what the size, weight, valve and gas mix mean for your work, and how the cylinders in this guide compare so you can match one to your MIG or TIG setup.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

VEVOR 60 Cu. Ft DOT Nitrogen Cylinder Aluminum

VEVOR 60 Cu. Ft DOT Nitrogen Cylinder Aluminum

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60 cu ft aluminum cylinder with a CGA 580 valve, a 0 to 600 PSI adjustment range and a 650 PSI relief valve, at 24.4 lb with a carry handle.

Pros

  • 6061-T6 aluminum body at 24.4 lb, light for a 60 cu ft cylinder
  • 0 to 600 PSI stepless adjustment with a 650 PSI relief valve built in
  • CGA 580 valve with a one-way check structure and dual seals
  • DOT stamped with a fresh manufacture date, plus a portable handle

Cons

  • Ships empty, so a fill at a gas supplier is needed before use
  • Sold as a nitrogen cylinder, so a buyer wanting a prefilled argon mix should look elsewhere
  • No warranty term is stated
  • 27.17 inches tall, so check it fits your cart or truck
40 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder

40 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder

Weldfabulous9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 40 cu ft cylinder filled with 75% argon and 25% CO2, with a CGA 580 valve and a 10 year date stamped on the tank.

Pros

  • Arrives full with 75% argon and 25% CO2, ready to feed a MIG welder
  • 10 year date stamped on the tank, within 2 years of the stamped date
  • CGA 580 valve, the same connection as the other cylinders here
  • Meets DOT and ISO regulations, with the DOT number stamped on the tank

Cons

  • 40 cu ft runs out sooner than the larger cylinders here
  • Ships only to the Continental US (Lower 48 States)
  • No warranty term is stated
  • No handle is listed, so it is carried by the body
New 125 cu ft Steel Inert Gas Cylinder with CGA580

New 125 cu ft Steel Inert Gas Cylinder with CGA580

Varies9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 125 cu ft steel cylinder with a CGA 580 valve and 2265 PSI service pressure, certified within 12 months and shipped empty.

Pros

  • 125 cu ft, the largest capacity here, so the longest time between fills
  • 2265 PSI service pressure with a CGA 580 valve and 3/4 inch NGT inlet thread
  • Certification within 12 months and DOT approved
  • Takes helium, nitrogen, argon or a CO2 and nitrogen mix

Cons

  • 63.0 lb steel body, the heaviest cylinder here
  • Ships empty, so a fill is needed before use
  • Cylinder color may vary, gray, cranberry or black, so the color is not a choice
  • 7 inches in diameter and 41 inches tall, so it needs a tall cart or a fixed spot
20 cu ft Steel Argon Cylinder - CGA580 Valve

20 cu ft Steel Argon Cylinder - CGA580 Valve

Varies9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact 20 cu ft steel argon cylinder with a CGA 580 valve, 2015 PSI service pressure and a 5.25 inch diameter for mobile and small shop work.

Pros

  • 5.25 inches in diameter and 18 inches tall, the smallest cylinder here
  • 13.67 lb tare weight, light enough to carry to a job site
  • CGA 580 valve that also works with nitrogen, helium, neon and a CO2 and nitrogen mix
  • 2015 PSI service pressure in a DOT approved steel body

Cons

  • 20 cu ft is the smallest capacity here, so the most frequent refills
  • Ships empty and needs a fill at a local supplier before use
  • Helium is in short supply, and the maker says to find a helium filler in your area before purchase
  • No handle is listed, so it is carried by the body

What a Q size gas cylinder is

Welding suppliers list gas cylinders by the volume of gas they hold, in cubic feet, and by a size name such as Q. The capacity tells you how much gas is in the cylinder, while the diameter and height tell you whether it fits your cart, truck or shop corner. All four cylinders in this guide use a CGA 580 valve, so the same regulator fits each one, and the choice comes down to capacity, size, weight and gas.

Side by side

VEVOR 60 Cu. Ft. Nitrogen Cylinder Weldfabulous 40 Cu. Ft. Argon CO2 125 Cu. Ft. Steel Inert Gas Cylinder 20 Cu. Ft. Steel Argon Cylinder
Capacity 60 cu ft 40 cu ft 125 cu ft 20 cu ft
Size 7.28 x 7.28 x 27.17 in Not stated 7 x 41 in 5.25 x 18 in
Weight 24.4 lb 30.0 lb 63.0 lb 13.67 lb tare
Valve CGA 580 CGA 580 CGA 580 CGA 580
Gas Nitrogen 75% argon, 25% CO2 Helium, nitrogen, argon, CO2/nitrogen mix Argon, nitrogen, helium, neon, CO2/nitrogen mix
Ships Empty Full Empty Empty

The 40 cu ft cylinder is the only one that arrives full; the rest ship empty and need a fill at a local gas supplier. Capacities and dimensions are listed as the maker states them.

How to pick the size

Start with capacity. The cylinders in this guide hold 20, 40, 60 and 125 cu ft, and a larger cylinder means fewer trips for a fill. Then check the size and weight against your cart and how far you carry it: the smallest here is 5.25 inches across and 18 inches tall at a 13.67 lb tare weight, while the tallest is 7 inches across and 41 inches tall at 63.0 lb, and the widest is the 60 cu ft cylinder at 7.28 inches across. Then match the gas to the work: the 75% argon and 25% CO2 cylinder arrives full and ready to feed a MIG welder, while the argon cylinder suits TIG and MIG work, and the 125 cu ft cylinder takes helium, nitrogen, argon or a CO2 and nitrogen mix for inert gas uses. Every cylinder here ships with a CGA 580 valve, so check that your regulator matches that connection before ordering.

Q size gas cylinder picks

Once you know the capacity and size you need, the cylinder itself is the next step: these are the cylinders in this guide, ranked by Gear Score, each with the job it handles.

Cylinder safety and handling

A gas cylinder holds gas under pressure, so treat it with respect. Store cylinders upright and chained so they cannot fall, keep them away from heat and out of the path of sparks and hot metal, and check the stamped date on the tank before you accept a cylinder. A cylinder that ships empty needs a fill at a gas supplier, and the valve connection, CGA 580 on every cylinder here, must match your regulator. If a cylinder is damaged or the valve leaks, leave it alone and ask the supplier what to do.

FAQ for welders

What does Q size mean on a gas cylinder?

Q is a size name welding suppliers use for a gas cylinder, and the capacity in cubic feet is the figure that tells you how much gas it holds. The cylinders in this guide are listed by capacity, from 20 cu ft to 125 cu ft, with the diameter and height given for the cylinders where the maker states them. When you order, match the size name and the capacity to what your supplier stocks.

What valve does a Q size gas cylinder use?

Every cylinder in this guide uses a CGA 580 valve, which is the standard connection for inert shielding gas. That means one CGA 580 regulator fits any of them, whether the cylinder holds argon, a 75% argon and 25% CO2 mix, nitrogen or another inert gas. Check the valve on your cylinder matches your regulator before you connect it.

How heavy is a Q size gas cylinder?

It depends on the cylinder. The cylinders in this guide weigh from a 13.67 lb tare weight for the 20 cu ft steel cylinder to 63.0 lb for the 125 cu ft steel cylinder, while the 60 cu ft aluminum cylinder weighs 24.4 lb. Check the weight and the height against your cart before you order, and remember that a full cylinder weighs more than an empty one.

Does a gas cylinder ship full or empty?

The 40 cu ft cylinder arrives full, while the other cylinders in this guide ship empty and need a fill at a local compressed gas supplier. An empty cylinder is refillable, so you buy the cylinder once and fill it again when it runs out. Check whether your supplier fills the size you buy before you order.

Can one cylinder run both MIG and TIG?

Yes, if the gas suits both jobs. The 20 cu ft argon cylinder is listed for TIG and MIG welding. The 75% argon and 25% CO2 mix feeds a MIG welder and is not a TIG shielding gas, so match the gas to the process your machine and wire call for.

Related: welding consumables, best welder for beginners, and how to choose a MIG welder. Also see the best flux core welder guide.

More buying guides

Welding Consumables ·

Types of Gas Cylinder Used in Welding

The types of gas cylinder used in welding run from small refillable propane tanks for hand torches to large high-pressure cylinders for argon, oxygen,…

Welding Consumables ·

Gas Cylinder Valve Types for Welding

Gas cylinder valve types come down to the fitting on the cylinder: CGA580 and CGA320 inlets for welding gases, a type-1 connection for propane,…