Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Magnetic Plasma Cutter Guide: What It Does and How to Use It

A magnetic plasma cutter guide holds itself to steel and steers the torch along a straight or round path, and this guide covers the kinds, the sizes and how to use one.

Magnetic Plasma Cutter Guide: What It Does and How to Use It
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ARCCAPTAIN iControl CUT60 Pro Plasma Cutter MachineARCCAPTAIN iControl CUT60 Pro Plasma Cutter Machine9.8/10View on Amazon
  2. 2YESWELDER CUT-65DS PLUS Plasma CutterYESWELDER CUT-65DS PLUS Plasma Cutter9.7/10View on Amazon
  3. 3YESWELDER 45PCS Plasma Cutting Torch Consumables Set TipYESWELDER 45PCS Plasma Cutting Torch Consumables Set Tip9.7/10View on Amazon

A round flange or a long straight cut on plate steel is hard to hold steady by hand, and a wobble in the torch shows in the edge. A magnetic plasma cutter guide gives the torch a path to follow and holds itself to the steel with magnets, so the cut stays true without clamps in the way. This guide explains what the tool does, the kinds you can buy, and how to set it up and use it.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

What a magnetic plasma cutter guide does

A magnetic plasma cutter guide is a straight edge, a circle compass or a rail that sticks to steel with magnets and steers the torch along a set line. The magnet base holds the guide on flat plate, and the WeldingStop circle guide (on Amazon) is listed with a base that locks onto vertical or overhead steel and holds through cutting vibration. The torch rides against the edge or in a holder on the rail, which keeps the standoff steady and the line straight or round.

Most of these guides serve plasma cutting, and the straight edge kind also suits a burning torch and layout work. A guide will not fix a dull tip or a wrong setting, but it takes the wobble out of a long cut.

Kinds of magnetic guide

Circle guides cut round shapes. A pivot point sits at the center of the circle, a guide wheel runs around it, and the magnetic base holds the whole compass still. The WeldingStop compass and the Cocoarm guide (on Amazon) cover circles from 10 to 100 cm, which the maker also gives as 3.9 to 39.4 in, and the Cocoarm guide lists the top end as 39.3 inch. Six magnets hold the base down, and a scale on the guide helps set the diameter.

Straight guides are a raised blade on a magnetic body. The Jackson Safety 24 inch guide has three 30-pound pull magnets cast into the body, a 2 inch wide blade on a raised plane, and a weight of 2.2 pounds. The Curv-O-Mark+ guide from the same maker uses three rare-earth magnets in a 6063 aluminum body and weighs 1.61 pounds. The raised blade keeps the torch tip clear while it holds the cutting path straight.

Linear rail guides are a rail the torch travels along. The VAXYOR rail runs 62cm and carries two magnetic bases, while the Generic 100cm (on Amazon) rail uses a strong magnetic base and a high-precision guide rail. On the VAXYOR rail, the torch holder slides along the rail, so the torch moves in a straight line without a hand guiding it. Some rails use a samarium cobalt magnet, which the maker states holds its magnetism under high heat.

Side by side

Circle guide Straight guide Linear rail guide
Cut shape Circles Straight lines Straight lines
Size 10 to 100 cm 24 inch blade 62cm or 100cm rail
How it holds Six magnets Three magnets Magnetic bases (two on VAXYOR)
Torch fit AG-60, SG-55 or P80, by model Burning torch and plasma cutter P80 on the VAXYOR rail
Body material Carbon steel or alloy, by model 6063 aluminum (Curv-O-Mark+) Steel and alloy, by model
Guide wheel or holder Guide wheel with height adjustment Raised blade Sliding torch holder (VAXYOR rail)

A circle guide is the pick for round work, a straight guide is the pick for layout and short straight cuts, and a rail is the pick for long straight runs. Pick the kind that matches the cut, then check the torch fit before you order.

How to use a magnetic circle guide

Set the diameter on the scale first, then set the pivot at the center of the circle you want. Put the magnetic base on clean steel and press it down until it holds, then set the guide wheel height so the torch sits at the right standoff. Move the torch around the pivot in a steady pass and let the wheel carry the line.

Check the fit before you start. The WeldingStop compass is made for AG-60 and SG-55 torches, and the Cocoarm guide is made for a P80 torch, so a torch that does not match will not sit right in the holder. A circle guide needs a flat surface for the base, so it suits plate and sheet rather than pipe or round stock.

How to use a magnetic straight guide or rail

Set the guide on the line you want to cut and press the magnetic base onto clean steel. Rest the torch against the raised blade of a straight guide, or seat the torch in the sliding holder of a rail guide. Move along the edge in a steady pass and keep the tip against the guide for the full length of the cut.

A rail guide needs no switch and no clamps, so setup is quick: place it, check the hold, and cut. If the steel is dirty or painted, wipe the spot under the magnets clean first, since a magnet grips bare steel best.

What to check before you cut

Check the magnet hold before you strike the arc. Press the base down and give it a firm tug; if it moves, clean the steel and set it again. Check that the torch fits the holder or the guide wheel, and that the air supply and ground clamp are set as your cutter manual asks. Our best air compressor for plasma cutter guide and our best ground clamp for plasma cutter picks cover the gear that feeds the cut.

Cut with ventilation and eye protection, and keep gloves on when you handle hot plate. Clear dry grass and anything flammable from the area. If the cut will not go through, see our why a plasma cutter is not cutting through guide before you change settings.

For more options, see our plasma cutters guides.

FAQ for welders

Will a magnetic plasma cutter guide stick to stainless steel?

It sticks to ferromagnetic steel, which is the surface the makers describe. Some stainless grades are magnetic and some are not, so check the hold on a scrap piece of the same steel before you cut. If the base will not hold, clamps are the safer route.

What torches fit a magnetic circle guide?

It depends on the guide. The WeldingStop compass is made for AG-60 and SG-55 torches, and the Cocoarm guide is made for a P80 torch. Check the torch fit in the guide you buy, since a torch that does not match will not sit right in the holder.

How big a circle can a magnetic circle guide cut?

The WeldingStop compass and the Cocoarm guide cover circles from 10 to 100 cm, which the maker also gives as 3.9 to 39.4 in, and the Cocoarm guide lists the top end as 39.3 inch. Set the diameter on the scale and check the pivot before you cut.

Can I use a magnetic guide on a vertical surface?

Some guides can. The WeldingStop circle guide is listed with a magnetic base that locks onto vertical or overhead steel and holds with no slip under cutting vibration. Check the hold before you cut, and do not trust a base that shifts when you tug it.

Do I still need to mark the cut line?

Marking still helps. A straight guide doubles as a layout edge, so you can mark the line and cut it with the same tool, and a circle guide needs the center marked so you can set the pivot.

Related: how to use a CNC plasma table, plasma cutter vs angle grinder for cutting steel, best home hobby plasma cutter, and our best portable plasma cutter picks.

More buying guides