Cowhide vs Pigskin Welding Gloves: Which Leather for Your Work?
A Tillman cowhide MIG glove and a Wells Lamont pigskin TIG glove compared on leather, cuff, lining, stitching and the one stated safety rating.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Wells Lamont TIG Welding Gloves, Pigskin Leather9.6/10View on Amazon - 2
John Tillman and Co Tillman Large 14" Gold9.5/10View on Amazon
Verdict. Pick the Tillman cowhide glove for MIG and general shop work: top grain cowhide palm, fleece lining and a 4-inch cuff, built for the heat of MIG. Pick the Wells Lamont pigskin glove for TIG and precision work: lighter-feeling grain pigskin, a 5-inch gauntlet cuff and a stated ANSI/ISEA abrasion level 4. Neither listing states a warranty term.
The bead is about to run and the question is what goes on your hands: cowhide vs pigskin welding gloves. The leather decides the feel, the cuff decides the coverage and the lining decides the heat you can stand. This comparison puts a Tillman cowhide MIG glove against a Wells Lamont pigskin TIG glove on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two gloves

Wells Lamont TIG Welding Gloves, Pigskin Leather
A grain pigskin TIG glove with a 5-inch gauntlet cuff, cotton lining, Kevlar stitching and a stated ANSI/ISEA abrasion level 4.
Pros
- ANSI/ISEA abrasion level 4 stated, abrasion marked Best
- Grain pigskin billed as lighter weight for precision TIG work
- 5-inch gauntlet cuff covers more forearm
- Fully cotton lined for heat protection
Cons
- Listing notes the gloves are not flame retardant
- Warranty mentions defects with no stated term

John Tillman and Co Tillman Large 14" Gold
A top grain cowhide MIG glove with a 4-inch cuff, fleece lining, Kevlar locking stitch and a seamless forefinger.
Pros
- Top grain cowhide palm with split reinforcements
- Fleece lined for hot or cold conditions
- Kevlar thread locking stitch with seamless forefinger
- 4-inch cuff with elastic back for fit
Cons
- No safety standard or abrasion rating stated
- No warranty term stated
Other welders and gear to compare
Wells Lamont Leather Welding GlovesCheck price on Amazon
Cowhide Welding GlovesCheck price on Amazon
SAFEGEAR Cowhide Leather Work Gloves with Keystone ThumbCheck price on Amazon
Black Stallion Unisex Adult Top Grain Leather Cowhide MigCheck price on Amazon
Cowhide Leather Work GlovesCheck price on Amazon
Caiman Premium Split Cowhide MIG/Stick Welding GlovesCheck price on Amazon
Side by side
| Glove | Gear Score | Leather | Cuff | Lining | Stitching | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| Wells Lamont 1053L Pigskin | 9.6/10 | Grain pigskin | 5 in gauntlet | Cotton, full | Kevlar (bullets) | 0.11 kg | Not stated |
| Tillman TIL50L Cowhide | 9.5/10 | Top grain cowhide | 4 in | Fleece | Kevlar locking stitch | 8 oz | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026. Neither listing states a warranty term.
Cowhide vs pigskin welding gloves: the leather difference
The Tillman side is cowhide through and through: a top grain cowhide palm the listing calls long lasting, with cowhide split reinforcements and a split cowhide back. The Wells Lamont side is grain pigskin on the palm and back, with split cowhide in the fabric mix per the spec table, and the listing calls the leather lighter weight for precise welding. On stated ratings the pigskin side leads: Wells Lamont states ANSI/ISEA abrasion level 4, marks abrasion resistance Best and puncture resistance High. The Tillman listing claims durability without a stated standard. One caution from the pigskin listing: it notes the gloves are not flame retardant, worth knowing on any glove sold for welding.
Cuffs, thumbs and fit
The Tillman wears a 4-inch cuff with an elastic back and closure, a wing thumb and a universal fit that the listing says fits with a positive sentiment. The Wells Lamont wears a longer 5-inch gauntlet cuff, a straight thumb and a pull-on closure in a relaxed large fit that the listing says fits true to size. The extra inch of cuff on the pigskin side covers more forearm; the elastic back on the cowhide side adjusts to the hand. Both are hand wash only.
Sizing, weight and origin
Size charts tell two different stories. The Tillman is a Large 14-inch glove with a universal fit the listing describes with positive fit sentiment; its table gives hand circumferences of 10 to 11 in for XL, 11 to 12 in for 2XL and 12 to 13 in for 3XL, with item dimensions of 8 x 4 x 0.5 in. The Wells Lamont is a Large with a relaxed fit the listing says fits true to size, and it is ambidextrous; its chart runs 9 to 9.5 in for XL, 9.5 to 10 in for 2X and 10 to 10.5 in for 3X, with item dimensions of 5.8 x 0.8 x 12.7 in. On weight, the Tillman lists 8 ounces and the Wells Lamont lists 0.11 kg, each in its own unit, so compare them as listed. On origin, the Tillman bullets say Made in the United States while its import designation reads Made in the USA or Imported; the Wells Lamont is listed as Imported.
Linings and stitching
The Tillman is fleece lined, which the listing says adds protection in hot or cold conditions, and sewn with Kevlar thread in a locking stitch, with a seamless forefinger the listing calls out for feel. The Wells Lamont is fully lined in cotton for heat protection and sewn with Kevlar thread per the bullets, though the spec table calls the stitching triple stitched. Both listings name Kevlar in the seam; neither names the thread weight. The Tillman weighs 8 ounces per the listing; the Wells Lamont lists 0.11 kg.
Palms, stretch and fabric class
Two more stated details separate them. The Tillman lists a reinforced palm style with a seamless forefinger, aimed at feel on the MIG gun, while the Wells Lamont lists a coated palm with added grip and a straight thumb. The Wells Lamont fabric type is stated as grain pigskin and split cowhide, so the pigskin side is not pigskin alone. The Tillman is cut and sewn leather throughout with a medium stretch and medium weight class; the Wells Lamont is cut and sewn with no stretch and a heavyweight fabric class.
Water, padding and the fine print
Neither glove is a wet-work glove. The Tillman listing states not water resistant outright. The Wells Lamont spec table is less clear: one field rates water resistance Best while another field, Water Resistance Level, says Not Water Resistant, so treat water protection on the pigskin side as uncertain. On vibration, the Wells Lamont lists padding as its dampening method; the Tillman table says that information was not found. The stitching has its own wrinkle: the Wells Lamont bullets say Kevlar thread throughout with fully welted seams, while the spec table says triple stitched, so the exact seam construction is uncertain even though Kevlar is named in both places. And the line worth repeating from the pigskin listing: the gloves are not flame retardant.
Before You Strike an Arc
- Check the cuff coverage before the first bead: 4 inches on the Tillman, a 5-inch gauntlet on the Wells Lamont.
- Both listings say hand wash only; let the gloves dry away from direct heat.
- The Wells Lamont listing notes the gloves are not flame retardant, so keep them clear of open flame.
- Confirm the size on arrival: the Tillman is a universal fit, the Wells Lamont is large with a relaxed fit.
FAQ for welders
Which is better for TIG welding, cowhide or pigskin?
Of these two, the Wells Lamont: its listing names TIG welding as the ideal use and calls the grain pigskin lighter weight for precision work. The Tillman listing names MIG welding as its recommended use.
Are pigskin welding gloves heat resistant?
The Wells Lamont listing claims heat protection with a full cotton lining, but it also notes the gloves are not flame retardant. Treat them as heat protection, not fire protection.
What does ANSI/ISEA abrasion level 4 mean?
It is the abrasion rating the Wells Lamont listing states, alongside abrasion resistance marked Best and puncture resistance marked High. The Tillman listing states no abrasion rating.
Can I machine wash welding gloves?
Not these two. Both listings state hand wash only, so keep them out of the machine.
Are either of these gloves waterproof?
No. The Tillman listing states not water resistant. The Wells Lamont table lists water resistance as Best in one field and Not Water Resistant in another, so its water protection is uncertain; do not count on either in wet conditions.
Do these gloves come with a warranty?
The Wells Lamont listing mentions manufacturer’s defects with no stated term, and the Tillman listing states no warranty at all. Neither earns warranty points.
Related: best welding gloves for farm work, best welding gloves for grinding and best welding gloves for plasma cutting.
Scoring, line by line
Each glove is scored on performance, build, value, safety and warranty, using only what the listing publishes. Only the Wells Lamont states a safety standard, ANSI/ISEA abrasion level 4, so the Tillman scores zero on safety. Neither listing states a warranty term, so both score zero on warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Wells Lamont 1053L Pigskin | 9.6 | 30 | 21 | 20 | 5 | 0 |
| Tillman TIL50L Cowhide | 9.5 | 29 | 21 | 20 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




