Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Welding Gloves for Plasma Cutting (2026)

Three welding gloves for plasma cutting compared on heat and cut ratings, length, leather type and the warranty each listing states.

Best Welding Gloves for Plasma Cutting (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Superior 370GFKL TIG GlovesBest OverallSuperior 370GFKL TIG Gloves9.6/10View on Amazon
  2. 2TOPDC 16in Welding GlovesBest Heat ProtectionTOPDC 16in Welding Gloves9.6/10View on Amazon
  3. 3BEETRO TIG Gloves 2-PackBest ValueBEETRO TIG Gloves 2-Pack9.5/10View on Amazon

Plasma cutting throws sparks, hot metal and UV light at your hands, so the glove matters as much as the torch. This guide picks the best welding gloves for plasma cutting from three gloves, scored on what each listing states about heat and cut ratings, length, leather type and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Superior 370GFKL TIG Gloves: TIG gloves with ANSI A2 cut, ANSI 3 heat and level 3 puncture protection in goatskin with a KEVLAR liner. Check price on Amazon
  • Best Heat Protection TOPDC 16in Welding Gloves: 16-inch gloves rated to 1000℉ with a 3-layer leather, foil and cotton build and Kevlar stitching. Check price on Amazon
  • Best Value BEETRO TIG Gloves 2-Pack: Two pairs of goatskin and cowhide TIG gloves with DP-KEV stitching and a flame-retardant build. Check price on Amazon

The machines

Superior Glove Endura 370GFKL Leather TIG Work

Superior Glove Endura 370GFKL Leather TIG Work

Superior Glove9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Leather TIG gloves with ANSI A2 cut, ANSI 3 heat and level 3 puncture protection in goatskin with a KEVLAR liner.

Pros

  • ANSI A2 cut resistance, 625 grams rated
  • ANSI 3 heat protection and spark resistance
  • Puncture resistance level 3
  • Goatskin with KEVLAR liner for dexterity

Cons

  • No warranty term stated
  • Gauntlet is shorter than the 16 in TOPDC
  • Medium shown; size up or down by hand width
  • Premium positioning
TOPDC Welding Gloves 16Inch 1000℉ Heat Resistant

TOPDC Welding Gloves 16Inch 1000℉ Heat Resistant

TOPDC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

16-inch welding gloves rated to 1000℉ with a 3-layer leather, foil and cotton build and Kevlar stitching.

Pros

  • 1000℉ extreme heat rating
  • 16 in length with 7.5 in protective sleeve
  • 3-layer: leather, foil core, cotton lining
  • Kevlar stitching with double reinforcements

Cons

  • Warranty description states NO
  • Bulkiest here; less dexterity
  • Pull-on only, no wrist adjustment
  • Black-brown only in the 16 in
BEETRO Working Gloves 2 Pairs

BEETRO Working Gloves 2 Pairs

BEETRO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two pairs of goatskin and cowhide TIG gloves with DP-KEV stitching, flame-retardant build and elastic wrists.

Pros

  • Two pairs in the box
  • Goatskin and cowhide leather
  • DP-KEV stitching, flame retardant
  • Elastic wrist keeps out dirt and debris

Cons

  • No heat or cut rating stated
  • No warranty term stated
  • 0.37 kg pair needs a fit check
  • White goatskin shows dirt fast

Other welders and gear to compare

Spec sheet comparison

Model Verdict Heat rating Cut rating Length Warranty
Superior 370GFKL Top pick ANSI 3 ANSI A2 Gauntlet Not stated
TOPDC 16 in Best heat 1000℉ Not stated 16 in Not stated
BEETRO 2-pack Best value Flame retardant Not stated Extended wrist Not stated

Ratings in this table are the makers’ own claims taken from each product page (19 October 2026).

Buying guide: best welding gloves for plasma cutting

Heat rating vs cut rating

Plasma cutting needs both. The TOPDC states 1000℉ heat resistance with a foil core, the most heat stated here. The Superior 370GFKL states ANSI 3 heat protection with spark resistance plus ANSI A2 cut resistance and puncture level 3, the most complete rating set here. The BEETRO states no ratings at all: fine for light duty, but you are trusting the leather, not a number.

Length and coverage

Sparks do not stop at the wrist. The TOPDC runs 16 inches with a 7.5-inch sleeve for full forearm defense. The Superior 370GFKL uses extended gauntlet cuffs for the wrist, and the BEETRO adds an extra-length cowhide wrist. For plasma work above a bench, longer wins.

Leather type and dexterity

Goatskin is the dexterity leather: the Superior 370GFKL and BEETRO use it for the fine touch that TIG and plasma torch work need. The TOPDC uses split cowhide for toughness, with a seamless index finger for grip. Kevlar stitching (TOPDC) or a KEVLAR liner (Superior) adds cut and wear resistance where the thread takes the abuse. Fit matters most: the TOPDC offers 4 sizes, and the Superior sizes by hand width from 2XS to 3XL.

What the listings do not say

No listing here states a warranty term: the TOPDC’s spec table reads NO, and the rest are silent. Treat gloves as consumables: inspect them before each session and retire any pair with holes, thin palms or failed stitching.

Use as directed. Gloves reduce risk; they do not make plasma cutting safe by themselves. Wear eye and face protection rated for the arc, keep the work area clear of flammables, and never cut without ventilation. See the OSHA welding overview and our site safety disclaimer.

Before You Strike an Arc

  • Match the glove to the heat: 1000℉ on the TOPDC, ANSI 3 heat on the Superior 370GFKL.
  • For overhead or vertical cutting, the 16-inch TOPDC protects the forearm.
  • Size by the listing’s chart: hand widths 2 to 5.5 inches on the Superior.
  • Gloves are consumables: retire any pair with holes or failed stitching.

FAQ for welders

What gloves do I need for plasma cutting?

Leather gloves with heat resistance and wrist-to-forearm coverage. The 16-inch TOPDC and the ANSI-rated Superior 370GFKL lead here; the BEETRO 2-pack covers lighter duty with dexterity.

Are TIG gloves good for plasma cutting?

For the torch hand, yes: TIG gloves like the Superior 370GFKL and BEETRO give the dexterity to guide the torch. Pair them with longer coverage if sparks reach the forearm.

What does ANSI A2 cut resistance mean?

It is a standardized cut-resistance level: the Superior 370GFKL is rated ANSI A2 with 625 grams of cut resistance, plus ANSI 3 heat and puncture level 3. Ratings let you compare gloves on numbers, not adjectives.

How long should welding gloves be?

Long enough to cover the wrist and then some. The TOPDC runs 16 inches with a 7.5-inch sleeve; gauntlet cuffs on the Superior cover the wrist. Short gloves leave the wrist exposed to sparks.

When should I replace welding gloves?

When the leather thins, holes appear or stitching fails. No listing here states a warranty term, so inspect before each session and treat gloves as consumables.

Related: the best leather welding gloves and the best home hobby plasma cutter.

Scoring, line by line

Each glove is scored on five criteria: performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states an electrical safety listing, so every glove scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Superior 370GFKL TIG Gloves 9.6 30 22 18 n/a 0
TOPDC 16in Welding Gloves 9.6 29 22 19 n/a 0
BEETRO TIG Gloves 2-Pack 9.5 26 20 21 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides