Best Welding Shirt for Plasma Cutting (2026): 5 Shirts Compared
Five flame-resistant welding shirts compared by fabric weight, arc rating, certification, closure and pockets for plasma cutting.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallUno Mejor FR Shirt9.7/10View on Amazon - 2
Best ContrastBOCOMAL Button-Down9.6/10View on Amazon - 3
Best Pearl SnapBOCOMAL Pearl Snap9.6/10View on Amazon - 4
Best Hi-VisDPSAFETY Hi-Vis Shirt9.5/10View on Amazon - 5
Best HeavyweightJust In Trend Western9.4/10View on Amazon
A plasma cut on the bench, sparks on the apron, and a shirt that has to take the heat without catching: that is the job the best welding shirt for plasma cutting is bought for. We compared five flame-resistant shirts by fabric weight, arc rating, certification, closure and pockets, using only what each listing publishes.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Uno Mejor FR Shirt: Most standards stated, FR buttons and threads, 100 washes Check price on Amazon
- Best Contrast BOCOMAL Button-Down: NFPA 2112 CAT 2, water stain resistant, tall sizes Check price on Amazon
- Best Pearl Snap BOCOMAL Pearl Snap: NFPA 2112 CAT 2, YKK pearl snaps, two cargo pockets Check price on Amazon
- Best Hi-Vis DPSAFETY Hi-Vis Shirt: CAT 2 arc rated, UL Certified, 6 oz lightweight Check price on Amazon
- Best Heavyweight Just In Trend Western: 9 oz heavyweight cotton FR, western snap style Check price on Amazon
The machines

FR Shirts for Men, 5.5OZ Welding Shirt
A flame-resistant work shirt with FR buttons and threads, a 5.5 oz cotton twill build and standards up to CAT II.
Pros
- Meets HRC2, NFPA 2112, NFPA 70E, ASTM F1506 and CAT II
- FR buttons and threads with a clear FR tag and UL details on the neck tag
- Prewashed and preshrunk, wrinkle-free for easy care
- Effective up to 100 washes, per the listing
Cons
- No warranty term is stated
- Reflective stripe is optional, not standard
- No size range is stated

BOCOMAL FR Shirts for Men Button Down Lightweight
A lightweight 6.5 oz flame-resistant welding shirt in 100% cotton with contrast styling and a water stain resistant finish.
Pros
- NFPA 2112 CAT 2, UL Certified and arc rated
- 6.5 oz 100% cotton, lightweight for long shifts
- Sizes from Small to 6X-Large including tall sizes
- Water stain resistant finish
Cons
- No warranty term is stated
- Single cargo pocket only
- No shirt-only weight is stated, only the 1.41 lb package
- Button closure only, no snap option stated

BOCOMAL FR Shirts Pearl Snaps Two Tone
A two-tone 6.5 oz flame-resistant work shirt with YKK pearl snaps and a plaid option.
Pros
- NFPA 2112 CAT 2, UL Certified and arc flash rated
- YKK pearl snaps on a two-tone printed or solid body
- 6.5 oz 100% cotton, lightweight
- Two cargo pockets
Cons
- No warranty term is stated
- No weight is stated
- No package dimensions are stated
- Sizes start at Medium, no Small stated

FR Shirts for Men, 6oz Hi Vis Flame Resistant
A lightweight 6 oz hi-vis flame-resistant shirt in 100% cotton with a CAT 2 arc rating.
Pros
- CAT 2 arc rated and UL Certified
- 6 oz 100% cotton, lightweight
- Long sleeve with a regular fit
- Sizes from XL to 5XL
Cons
- No warranty term is stated
- No pocket count is stated
- No closure type is stated
- No weight is stated

Flame Resistant FR Welding Shirt - 100% C - 9 oz
A heavyweight 9 oz western-style flame-resistant shirt in 100% cotton with snap closure.
Pros
- 9 oz heavyweight 100% cotton FR fabric
- Western style with snap closure
- Two patch pockets
- 1.5 lb stated weight with machine wash care
Cons
- No arc rating or certification is stated
- No warranty term is stated
- Heavyweight class, heavier than the 6 oz and 6.5 oz picks
- Regular fit only, no relaxed or tall option stated
Other welders and gear to compare
FR Shirts for MenCheck price on Amazon
BOCOMAL FR Welding Shirts Triple Stitched Pearl Snap DownCheck price on Amazon
BOCOMAL Men's FR Shirts 6.25oz Lightweight Flame ResistantCheck price on Amazon
Fr Shirts for Men Lightweight Welding Long Sleeve Shirts MensCheck price on Amazon
FR Welding ShirtCheck price on Amazon
Spec sheet comparison
| Welding Shirt | Gear Score | Fabric | Rating | Closure | Pockets | Warranty |
|---|---|---|---|---|---|---|
| Uno Mejor FR Shirt | 9.7/10 | 5.5 oz cotton twill | HRC2, NFPA 2112 | Button | 2 patch | Not stated |
| BOCOMAL Button-Down | 9.6/10 | 6.5 oz cotton | NFPA 2112 CAT 2 | Button | 1 cargo | Not stated |
| BOCOMAL Pearl Snap | 9.6/10 | 6.5 oz cotton | NFPA 2112 CAT 2 | Pearl snap | 2 cargo | Not stated |
| DPSAFETY Hi-Vis Shirt | 9.5/10 | 6 oz cotton | CAT 2 | Not stated | Not stated | Not stated |
| Just In Trend Western | 9.4/10 | 9 oz cotton | Not stated | Snap | 2 patch | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 25 October 2026.
Buying guide: best welding shirt for plasma cutting
Fabric weight
Fabric weight runs from 5.5 oz on the Uno Mejor per its bullets to 9 oz on the Just In Trend, with the DPSAFETY at 6 oz and both BOCOMAL shirts at 6.5 oz. All five use 100% cotton, flame-resistant treated or stated as FR. A lighter shirt suits a hot shop, while the 9 oz western shirt suits cooler work. See our best vented welding shirt guide for hotter shops.
Arc rating and certification
Four listings state a rating and one states none. Both BOCOMAL shirts state NFPA 2112 CAT 2 with UL certification and an arc rating, the DPSAFETY states CAT 2 arc rated with UL certification, and the Uno Mejor states HRC2 with NFPA 2112, NFPA 70E, ASTM F1506 and CAT II. The Just In Trend states no rating or certification. Never read a rating as broader protection than the listing states: report the rating, check the tag on arrival, and match it to the job. See our best flame resistant shirt for welding guide for more rated shirts.
Closure and pockets
Closures split three ways: buttons on the Uno Mejor and the BOCOMAL button-down, YKK pearl snaps on the BOCOMAL pearl snap, and snaps on the Just In Trend. Pockets run from one cargo pocket on the BOCOMAL button-down to two cargo pockets on the pearl snap and two patch pockets on the Uno Mejor and Just In Trend. The Uno Mejor adds FR buttons and threads with a clear FR tag, which matters when a standard button would melt first.
Before You Strike an Arc
- Check the rating tag on arrival: the Uno Mejor carries a clear FR tag and UL details on the neck tag.
- Match the closure to the job: pearl snaps, buttons and snaps all appear here.
- Confirm the size range: the BOCOMAL button-down runs Small to 6X-Large with tall sizes, while the pearl snap starts at Medium.
- Note the contradiction on the Uno Mejor: bullets say 5.5 oz, the spec table says 7.5 oz.
- Wash per the listing: all five list machine wash care.
FAQ for welders
Which shirts here carry an arc rating?
The Uno Mejor with HRC2, NFPA 2112, NFPA 70E, ASTM F1506 and CAT II, both BOCOMAL shirts with NFPA 2112 CAT 2 and UL certification, and the DPSAFETY with CAT 2 arc rated and UL certification. The Just In Trend states no rating.
What fabric weights do these shirts come in?
The Uno Mejor at 5.5 oz per its bullets, the DPSAFETY at 6 oz, both BOCOMAL shirts at 6.5 oz, and the Just In Trend at 9 oz.
Which shirts have pearl snaps?
The BOCOMAL pearl snap with YKK pearl snaps. The Uno Mejor and BOCOMAL button-down use buttons, and the Just In Trend uses snaps.
Do any of these shirts state a warranty term?
None of the five listings states a warranty term, so warranty scores nothing here.
Which shirt weighs the least by stated fabric weight?
By fabric weight, the Uno Mejor at 5.5 oz per its bullets, then the DPSAFETY at 6 oz and both BOCOMAL shirts at 6.5 oz. The Just In Trend is 9 oz.
Also see our welding safety gear guides. Also see our welding jacket for plasma cutting guide.
Scoring, line by line
The Gear Score weighs performance, build, value, safety and warranty. For a welding shirt, safety means a stated arc rating or certification: four listings state one, from CAT 2 to the Uno Mejor full set of HRC2, NFPA 2112, NFPA 70E, ASTM F1506 and CAT II, while the Just In Trend states none. No listing states a warranty term. How we pick explains the weights.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Uno Mejor FR Shirt | 9.7 | 30 | 21 | 21 | 9 | 0 |
| BOCOMAL Button-Down | 9.6 | 29 | 21 | 21 | 8 | 0 |
| BOCOMAL Pearl Snap | 9.6 | 29 | 20 | 21 | 8 | 0 |
| DPSAFETY Hi-Vis Shirt | 9.5 | 27 | 20 | 20 | 7 | 0 |
| Just In Trend Western | 9.4 | 26 | 20 | 20 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




