Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Welding Gloves for Farm Work (2026): 3 Picks Compared

Three gloves for welding around the farm compared: split and full-grain cowhide, cut-resistant liners and heat ratings, with Gear Scores.

Best Welding Gloves for Farm Work (2026): 3 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Schwer PM3401Best OverallSchwer PM34019.6/10View on Amazon
  2. 2WZQH Leather Work GlovesBest Heat RatingWZQH Leather Work Gloves9.5/10View on Amazon
  3. 3Black Stallion 97SWLBest Drivers GloveBlack Stallion 97SWL9.4/10View on Amazon

The fence needs mending, the gate hinge needs a bead, and the same hands that run the wire also run the welder. Farm welding is short beads between chores, not production shifts, which is what the best welding gloves for farm work are for. These three gloves cover the range: full-grain and split cowhide for sparks and heat, and a cut-resistant liner for sharp metal. For each one we list what the listing states and say plainly what it does not.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Schwer PM3401: ANSI A9 cut-resistant liner, full-grain cowhide, reinforced fingertips and palm Check price on Amazon
  • Best Heat Rating WZQH Leather Work Gloves: ANSI/ISEA heat level 4 rating, split cowhide with cotton lining, 6 sizes with adjustable wrist Check price on Amazon
  • Best Drivers Glove Black Stallion 97SWL: Grain cowhide palm with Kevlar stitching and reinforced palm, welding listed as a recommended use Check price on Amazon

The machines

Schwer Pro Max ANSI A9 Cut Resistant Leather Work

Schwer Pro Max ANSI A9 Cut Resistant Leather Work

Schwer9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A full-grain cowhide work glove with an ANSI A9 certified cut-resistant liner, reinforced fingertips and palm, and an adjustable hook and loop cuff.

Pros

  • ANSI/ISEA 105 Cut Level A9 certified liner
  • 100% full-grain cowhide with reinforced fingertips and palm
  • Adjustable hook and loop cuff keeps debris out
  • Seams positioned away from the palm for dexterity

Cons

  • Outer leather layer is not cut-resistant, per the listing
  • No warranty term stated on the listing
  • Allow for the liner when sizing, per the listing
  • Single pair, not a bulk pack
WZQH Leather Work Gloves for Men

WZQH Leather Work Gloves for Men

WZQH9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A split cowhide work glove with a soft cotton fiber lining, reinforced palm and adjustable wrist, with a stated ANSI/ISEA heat level of 4.

Pros

  • ANSI/ISEA heat level 4 rating stated
  • 100% split cowhide with soft cotton fiber lining
  • Reinforced palm with adjustable wrist
  • 6 sizes from XSmall to 2XLarge

Cons

  • No safety certification stated, only the heat rating
  • No warranty term stated on the listing
  • Not water resistant, per the spec table
  • Size measured manually with possible slight error, per the listing
Black Stallion Men's Versatile Grain Cowhide Palm

Black Stallion Men's Versatile Grain Cowhide Palm

Black Stallion9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A grain cowhide palm drivers glove with Kevlar stitching, a reinforced palm and an elastic wristband, with welding as a recommended use.

Pros

  • Grain cowhide palm with Kevlar stitching
  • Reinforced palm with elastic wristband
  • Welding listed as a recommended use
  • 5.6 oz listed weight, snug fit

Cons

  • No safety certification or rating stated
  • Warranty description states no warranty
  • Unlined, so less insulation than lined picks
  • Not water resistant, per the spec table

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Material Liner Pack Safety stated Warranty
Schwer PM3401 9.6/10 Full-grain cowhide A9 cut-resistant knit 1 pair ANSI A9 certified Not stated
WZQH Leather Work Gloves 9.5/10 Split cowhide Cotton fiber 1 pair Heat level 4 Not stated
Black Stallion 97SWL 9.4/10 Grain cowhide palm Unlined 1 pair Not stated No warranty

All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026. A figure from one listing describes that listing only.

Buying guide: the best welding gloves for farm work

Leather type

All three are cowhide: the Schwer lists 100% full-grain cowhide, the WZQH lists 100% split cowhide with a soft cotton fiber lining, and the Black Stallion lists grain cowhide palms. Full-grain is the tougher hide; split is the softer, more flexible one.

Cut and heat ratings

Only two listings state safety ratings. The Schwer lists an ANSI/ISEA 105 Cut Level A9 certified knit liner, with the note that the outer leather layer is not cut-resistant and the liner provides the A9 rating. The WZQH lists an ANSI/ISEA heat level of 4 with high temperature, abrasion, puncture and cut resistance claimed. The other one states no rating, so compare it on materials and construction instead.

Fit and sizing

Glove size matters as much as leather. The WZQH lists 6 sizes from XSmall to 2XLarge with an adjustable wrist and a 9.06 in glove length, the Schwer lists an adjustable hook and loop cuff, and the Black Stallion lists an elastic wristband in large. The Schwer listing advises allowing for the added cut-resistant liner when sizing. Measure your hand against the listing’s size chart rather than guessing.

Single pairs

The Schwer, WZQH and Black Stallion all sell as single pairs. A single pair suits the welder who wants the best-fitting glove for the job.

Before You Strike an Arc

  • Check the fit first: the Schwer listing advises sizing up for the cut-resistant liner, and the WZQH lists 6 sizes with an adjustable wrist.
  • Know what the rating covers: the Schwer’s A9 rating is in the liner, not the outer leather, per the listing.
  • Inspect on arrival: look for loose stitching and thin spots, especially on the reinforced palm of the Black Stallion.
  • Match the glove to the task: cowhide for welding and grinding, with the WZQH listing thorn proof construction for farm and garden work.
  • Care: the WZQH lists machine wash, the others list hand wash; the Schwer adds leather conditioner periodically.

FAQ for welders

Can I use regular work gloves for welding?

For tacking and light farm welding, a heavy cowhide work glove like the WZQH is what many farm welders reach for. For serious arc time, a dedicated welding glove with gauntlet cuffs protects the wrists better than any of these short-cuff picks.

What does ANSI A9 mean?

It is a cut-resistance rating under the ANSI/ISEA 105 standard, with A9 near the top of the scale. The Schwer listing certifies its knit liner to A9 and notes the outer leather is not cut-resistant.

Are these gloves good for fencing work?

The cowhide picks are: the WZQH lists thorn proof and puncture resistant construction. The Schwer’s A9 liner suits sharp metal and wire.

How do I size welding gloves?

Follow the listing’s size chart. The WZQH offers 6 sizes, the Schwer advises allowing for its liner, and adjustable wrists on the WZQH and Schwer help dial the fit.

Can I wash leather work gloves?

The WZQH lists machine wash; the Black Stallion and Schwer list hand wash, with the Schwer adding mild soap, air drying and periodic leather conditioner.

Related: the best welding helmet for beginners picks and our welding safety gear hub.

Scoring, line by line

Each pick is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page. Only the Schwer listing states a safety certification, the ANSI A9 cut rating, and only the WZQH listing states a heat rating, so only those two score on safety. No listing states a warranty with a concrete term, so all score zero on warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Schwer PM3401 9.6 30 21 20 7 0
WZQH Leather Work Gloves 9.5 28 20 20 3 0
Black Stallion 97SWL 9.4 26 20 19 0 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

More buying guides

Welding Safety Gear ·

Best Welding Sleeves for Farm Work (2026)

Three sleeves for farm work: leather heat-resistant welding sleeves, leather-patch cut sleeves and HPPE cut sleeves with a thumb hole, compared by protection, fit…

Welding Safety Gear ·

Best Welding Boots for Farm Work (2026)

Best welding boots for farm work: five steel and composite toe boots compared on toe type, water resistance, closure and heat ratings.

Welding Safety Gear ·

Best Welding Jacket for Farm Work (2026)

Best welding jacket for farm work: five FR cotton and leather jackets compared on certification, fabric weight, closure and care.