Best Shop Press (2026): 5 Hydraulic H-Frame Picks
Five hydraulic H-frame shop presses for a home shop, compared on capacity, working height, press plates, frame and the relief valve each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 12 Ton9.6/10View on Amazon - 2
Biggest CapacityMaxsa 20 Ton9.5/10View on Amazon - 3
Best 6 TonMAXSA 6 Ton9.5/10View on Amazon - 4
Best 12 Ton ValueDEXSO 12 Ton9.5/10View on Amazon
A bearing that will not budge, a bent bracket that needs straightening, a bushing that has to seat square: these are the jobs that call for steady pressure instead of a hammer. This guide compares the picks for the best shop press for a home shop, all hydraulic H-frame presses, scored on capacity, frame, plates and relief valve, from what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR 12 Ton: A 12 ton press with a 0.2 inch carbon steel frame, a relief valve at 12 tons, two movable plates and a 1.6 to 27.8 inch working height. Check price on Amazon
- Biggest Capacity Maxsa 20 Ton: The only 20 ton press here, rated at 40,000 lbs, with work blocks and triangular base supports for the heaviest pressing jobs. Check price on Amazon
- Best 6 Ton MAXSA 6 Ton: An automatic relief valve at 6 tons, a 4 level adjustable work table, a jack fixing limiter and four support plates under the table. Check price on Amazon
- Best 12 Ton Value DEXSO 12 Ton: A 12 ton jack with dual manganese steel springs, two detachable plates and three height holes on each side. Check price on Amazon
The machines

VEVOR Hydraulic 12 Ton H-Frame Garage Floor
A 12 ton H-frame press with a stated 0.2 inch carbon steel body, a relief valve at 12 tons, two movable plates and a working height of 1.6 to 27.8 inches.
Pros
- Relief valve releases pressure at 12 tons, matching the rated capacity
- Stated 0.2 inch carbon steel body with a triangular base for stability
- Working height adjusts from 1.6 to 27.8 inches on a pin system
- Two movable stamping plates hold small parts during pressing
Cons
- No warranty term is stated in the listing
- No work blocks are listed, only the two movable plates
- At 86.0 lb it is heavy to move once it is set up
- The 54.3 inch length needs a clear stretch of floor

MAXSA 6 Ton Hydraulic Shop Press
A 6 ton H-frame press with an automatic relief valve, a 4 level adjustable work table, two press plates and four support plates under the table.
Pros
- Automatic relief valve releases excess pressure at 6 tons
- Four level adjustable work table fits different workpiece sizes
- Jack fixing limiter and four support plates lock the frame in alignment
- Two press plates hold small parts firmly in place
Cons
- 6 tons is the smallest capacity in this guide
- No work blocks are listed, only the two press plates
- The 24.02 inch depth takes more floor depth than the other presses here
- No warranty term is stated in the listing

DEXSO 12 Ton H-Frame Hydraulic Shop Press
A 12 ton H-frame press with a 12 ton jack, dual manganese steel springs, two detachable plates and three height holes on each side.
Pros
- 12 ton jack with dual manganese steel springs for steady pressure
- Rapid oil return reduces the effort needed between presses
- Two detachable plates hold small components in place
- Three adjustable holes on each side for height changes
Cons
- At 85.98 lb it is heavy to move once it is set up
- No work blocks are listed, only the two detachable plates
- Three height holes per side give fewer settings than the 4 level MAXSA table
- The 53.15 inch length needs a clear stretch of floor

DEXSO 6 Ton H-Frame Hydraulic Shop Press, Red
A 6 ton H-frame press with a 6 ton jack, dual manganese steel springs, two detachable plates and three height holes on each side.
Pros
- 6 ton jack with dual manganese steel springs for steady pressure
- Built-in safety valve activates at 6 tons
- Two detachable plates hold small components in place
- Three adjustable holes on each side for height changes
Cons
- 6 tons is the smallest capacity in this guide
- No work blocks are listed, only the two detachable plates
- Three height holes per side give fewer settings than the 4 level MAXSA table
- At 50.71 lb it needs a flat floor and centered work to stay steady under load

Hydraulic Press 20 Ton Hydraulic Shop Press
A 20 ton H-frame press rated at 40,000 lbs, with work blocks, triangular base supports and a flat-pack carton for transport.
Pros
- 20 ton capacity, rated at 40,000 lbs, the highest here
- Work blocks hold the workpiece square between crossbeam and base
- Triangular base supports and heavy-gauge carbon steel frame
- Flat-pack carton of 56.1 by 10 by 5.5 inches is easy to carry and store
Cons
- Arrives flat packed and needs assembly, with two people recommended
- No relief valve is listed, unlike the other four presses here
- At 108 lb it is the heaviest press here and the hardest to move
- The 56.0 inch length needs the most floor space here
Other welders and gear to compare
VEVOR Hydraulic Shop PressCheck price on Amazon
12-Ton Hydraulic Shop PressCheck price on Amazon
HPDMC 30 Ton H-Frame Hydraulic Shop Press with Floor PressCheck price on Amazon
MAXSA 20 Ton H-Frame Hydraulic Shop PressCheck price on Amazon
IDEALHOUSE 20 Ton Hydraulic Shop PressCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Capacity | Working height | Press plates | Frame | Weight | Relief valve |
|---|---|---|---|---|---|---|---|
| VEVOR 12 Ton | 9.6/10 | 12 tons | 1.6 to 27.8 in | 2 movable plates | H-frame, 0.2 in carbon steel | 86.0 lb | At 12 tons |
| MAXSA 6 Ton | 9.5/10 | 6 tons | 4 levels, heights not stated | 2 press plates | H-frame, carbon steel | 52.91 lb | At 6 tons |
| DEXSO 12 Ton | 9.5/10 | 12 tons | 3 holes per side, heights not stated | 2 detachable plates | H-frame | 85.98 lb | Stated at 6 tons |
| DEXSO 6 Ton | 9.5/10 | 6 tons | 3 holes per side, heights not stated | 2 detachable plates | H-frame | 50.71 lb | At 6 tons |
| Maxsa 20 Ton | 9.5/10 | 20 tons, 40,000 lbs | Not stated | Work blocks included | H-frame, carbon steel | 108 lb | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 18 November 2026.
Buying guide: choosing the best shop press
Capacity
Capacity is the first choice. The 6 ton presses suit bushings, bearings and ball joints, the 12 ton presses cover heavier bending and straightening, and the Maxsa 20 Ton is rated at 40,000 lbs. Match capacity to the largest job you expect, and never exceed the rated capacity.
Working height and adjustment
Working height decides which parts fit under the ram. The VEVOR states a range of 1.6 to 27.8 inches on a pin system, the MAXSA 6 Ton adjusts across four levels, and both DEXSO presses use three adjustable holes on each side. The Maxsa 20 Ton states no working height.
Press plates and work blocks
Plates and blocks hold the work square while you pump. Four presses here include two plates each: movable stamping plates on the VEVOR, press plates on the MAXSA 6 Ton, and detachable plates on both DEXSO presses. The Maxsa 20 Ton instead includes solid work blocks.
Frame and stability
Every press here uses an H-frame, but the bracing differs. The VEVOR states a 0.2 inch carbon steel body with a triangular base, the MAXSA 6 Ton adds a jack fixing limiter and four support plates under the work table, and the Maxsa 20 Ton uses heavy-gauge carbon steel with triangular base supports.
Relief valve
A relief valve releases excess pressure when the load reaches the rated tons, protecting the frame and the workpiece from overload. The VEVOR valve is set at 12 tons, the MAXSA 6 Ton and DEXSO 6 Ton valves at 6 tons, and the DEXSO 12 Ton states a safety valve that activates at 6 tons. The Maxsa 20 Ton states no relief valve.
Weight and footprint
Weight runs from 50.71 lb for the DEXSO 6 Ton to 108 lb for the Maxsa 20 Ton, and length runs from 38.98 inches to 56.0 inches. A heavier press stays put while you work, while a lighter one is easier to shift around the shop. Check the listed dimensions against your floor space.
Use as directed. Never exceed the rated capacity, and never put hands between the ram and the work while pumping the jack. Set the press on a flat, level floor, seat the plates or blocks square, and keep the area clear of anything that can catch on the frame. See the OSHA machine guarding page and our Safety Disclaimer.
Before You Strike an Arc
- Check the jack, relief valve and handle on arrival, and confirm the press plates or work blocks listed for your pick are in the box.
- Set the work table height with the pins or holes before the workpiece goes in, and seat the plates square under the ram.
- Place the press on a flat floor with room to work the long handle, and keep the area clear of anything that can catch on the frame.
- Keep the workpiece centered on the plates or blocks so the load stays square, and stop if the part starts to slip or tilt.
- Never press past the rated capacity, and never put hands between the ram and the work while pumping.
FAQ for welders
What is a shop press used for?
A shop press seats and removes bearings, bushings, ball joints and U-joints, and presses pulleys and gears on and off shafts. The listings here also state bending, straightening, stamping and punching, so the same press covers light metalwork and farm repairs.
What size shop press do I need?
A 6 ton press covers bushings, bearings and ball joints in a home shop, while a 12 ton press handles heavier bending and straightening. The Maxsa 20 Ton, rated at 40,000 lbs, suits the biggest pressing jobs. Pick the capacity for the largest job you expect, and never exceed the rated capacity.
How does the relief valve on a shop press work?
The valve releases excess pressure the moment the load reaches the rated tons, which protects the frame and the workpiece from overload. The VEVOR valve is set at 12 tons, and the MAXSA 6 Ton and DEXSO 6 Ton valves at 6 tons. The Maxsa 20 Ton states no relief valve.
Do shop presses need assembly?
The Maxsa 20 Ton arrives flat packed in a single carton, and assembly is required, with two people recommended for safe setup. The other listings here do not state assembly.
Can a shop press bend metal?
Yes, the listings here state bending, straightening and stamping alongside pressing work. The VEVOR lists bending, straightening and stamping, and both DEXSO presses list bending and straightening.
Related: lifting and pressing hub, shop press vs arbor press, and the shop presses hub. Also see our types of lifting clamps. Also see our parts of a chain hoist. Also see our electric hoist vs chain hoist. Also see our best bench vise for metal work. Also see our welding table vs workbench.
More related guides (7)
Scoring, line by line
Each press is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. The safety score comes from the relief valve or safety valve each listing states; the Maxsa 20 Ton states no valve, so it scores zero there. No listing states a warranty term, so every press scores zero on warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 12 Ton | 9.6 | 29 | 21 | 21 | 7 | 0 |
| MAXSA 6 Ton | 9.5 | 28 | 20 | 20 | 7 | 0 |
| DEXSO 12 Ton | 9.5 | 29 | 20 | 20 | 5 | 0 |
| DEXSO 6 Ton | 9.5 | 27 | 19 | 20 | 7 | 0 |
| Maxsa 20 Ton | 9.5 | 32 | 21 | 20 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




