Best MIG Wire 0.8 mm (2026): 4 Picks for Mild Steel
4 wires against the 0.8 mm size, compared: solid ER70S-6 for gas MIG and gasless flux core for outdoor work, scored on diameter, spool size, shielding needs and stated standards.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWeldingCity ER70S-6 0.8 mm 2-Pack9.5/10View on Amazon - 2
Single Roll PickWeldingCity ER70S-6 0.8 mm9.5/10View on Amazon - 3
Second 2-PackRumvita ER70S-6 0.8 mm 2-Pack9.4/10View on Amazon - 4
Gasless PickSSIMDER E71T-GS 0.8 mm Flux Core9.4/10View on Amazon
A spool of wire that feeds badly ruins the day before the arc is even struck. Bird nesting at the drive rolls, burnback into the tip and porosity in the bead all trace back to wire that does not suit the machine, the gas or the job, and that is why best mig wire 0.8 mm is such a searched size among home MIG welders. This guide compares 4 wires from current listings against that size: solid ER70S-6 for gas shielded MIG and gasless flux core for outdoor work, scored on what each listing states about diameter, spool size, shielding and standards.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall WeldingCity ER70S-6 0.8 mm 2-Pack: 0.030 in (0.8 mm) ER70S-6 mild steel wire made to AWS A5.18, in a 2 pack of 10 lb spools for long shop sessions. Check price on Amazon
- Single Roll Pick WeldingCity ER70S-6 0.8 mm: The same 0.8 mm ER70S-6 wire as the top pick, as a 10 lb spool for welders who do not want a spare on the shelf. Check price on Amazon
- Second 2-Pack Rumvita ER70S-6 0.8 mm 2-Pack: ER70S-6 0.8 mm in a 2 pack of 10 lb rolls, with higher manganese and silicon for rusty or oily steel. Check price on Amazon
- Gasless Pick SSIMDER E71T-GS 0.8 mm Flux Core: 0.8 mm E71T-GS flux core wire that needs no gas, in a 2 pack of 2.2 lb rolls for outdoor and farm work. Check price on Amazon
The machines

2-pk Mild Steel MIG Welding Wire ER70S-6 10-Lb
Mild steel ER70S-6 MIG wire, 0.030 inch (0.8 mm), in a 2 pack of 10 lb spools made to AWS A5.18 for gas shielded MIG welding.
Pros
- 0.8 mm ER70S-6 wire made to AWS A5.18
- Two 10 lb spools keep the machine fed for long shop sessions
- Copper coated for smooth feeding
- U.S. based supplier with experienced customer support stated
Cons
- Needs shielding gas, so it is not an outdoor wire
- 8 inch spools need a full size machine hub
- 22 lb for the pair is a heavy box to store
- No warranty term in the listing

Mild Steel MIG Welding Wire ER70S-6 10-Lb Roll
The same 0.8 mm ER70S-6 mild steel MIG wire as the top pick, in a single 10 lb roll for welders who do not want a spare on the shelf.
Pros
- 0.8 mm ER70S-6 wire made to AWS A5.18
- A 10 lb spool on an 8 in roll with 2 in center hole
- Copper coated for smooth feeding with CO2 or Ar/CO2 mix
- U.S. based supplier support stated
Cons
- A single spool, so a runout stops the project until the next order
- Needs shielding gas and a cylinder
- Only the 10 lb size is offered
- No warranty term in the listing

(2-Pack) Mig Welding Wire ER70S-6 .030"
ER70S-6 mild steel MIG wire in 0.030 inch (0.8 mm), a 2 pack of 10 lb rolls with higher manganese and silicon for dirty steel.
Pros
- 0.8 mm ER70S-6 made to AWS A5.18
- Higher manganese and silicon for rusty or oily plates
- Two 10 lb rolls
- ABS plastic spool stated
Cons
- 20.5 lb for the pair
- Needs shielding gas
- No warranty term in the listing

SSIMDER 2PCS 1KG 0.8MM Flux Cored Wires E71T-GS
0.8 mm E71T-GS flux core wire, gasless, in a 2 pack of 2.2 lb rolls for MIG welders that run self shielded wire.
Pros
- True 0.8 mm diameter, matching this guide
- Gasless for windy outdoor work
- All positions, single or multi pass stated
- Vacuum packed, moisture resistant
Cons
- Slag to chip and more spatter than solid wire
- 2.2 lb rolls need frequent changes on long jobs
- Carbon steel only
- No stated standard or warranty term
Other welders and gear to compare
E71T-GS Gasless Flux-Cored Mild Steel MIG Welding Wire 0.030"Check price on Amazon
ER316L Stainless Steel MIG Welding Wire 2-Lb Spool 0.030"Check price on Amazon
YESWELDER Flux Core Gasless MIG Welding WireCheck price on Amazon
YESWELDER Gasless Flux Core MIG WireCheck price on Amazon
Forney 42300 Flux Core Mig Welding Wire 2-Pound PremiumCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Wire type | Diameter | Pack | Spool | Shielding | Standard |
|---|---|---|---|---|---|---|---|
| WeldingCity ER70S-6 0.8 mm 2-Pack | 9.5/10 | ER70S-6 solid | 0.030 in (0.8 mm) | Two 10 lb spools | 8 in roll, 2 in center hole | CO2 or Ar/CO2 mix | AWS A5.18 |
| WeldingCity ER70S-6 0.8 mm | 9.5/10 | ER70S-6 solid | 0.030 in (0.8 mm) | A 10 lb spool | 8 in roll, 2 in center hole | CO2 or Ar/CO2 mix | AWS A5.18 |
| Rumvita ER70S-6 0.8 mm 2-Pack | 9.4/10 | ER70S-6 solid | 0.030 in (0.8 mm) | Two 10 lb rolls | 10 lb rolls | 100% CO2 or CO2/argon mix | AWS A5.18 |
| SSIMDER E71T-GS 0.8 mm Flux Core | 9.4/10 | E71T-GS flux core | 0.8 mm | Two 2.2 lb rolls (1 kg each) | 1 kg rolls | None, self shielded | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 23 October 2026.
Buying guide: best mig wire 0.8 mm
Solid ER70S-6 or gasless flux core
ER70S-6 is solid mild steel wire that needs shielding gas: CO2 or an Ar/CO2 mix, per the listings. Gas keeps the arc calm and the bead clean, but a breeze blows it away, so gas MIG stays an indoor process. E71T-GS flux core makes its own shielding as the flux burns, so it welds outdoors on windy days; the price is slag to chip and more spatter than solid wire.
Wire diameter
The size in this guide is 0.030 inch, which the listings write as 0.8 mm. The WeldingCity listings also offer 0.023, 0.035 and 0.045 inch for other machines, so check that your drive rolls and contact tips match the wire you buy.
Spool size
The 10 lb spools here sit on 8 inch rolls with a 2 in center hole, a common size for full size MIG welders. Compact machines may take smaller spools, so check your hub before ordering. The 2.2 lb rolls suit occasional welders who would rather finish a spool before it can rust.
Shielding gas
Solid wire needs gas; flux core does not. The ER70S-6 listings call for CO2 or an Ar/CO2 mix, and the Rumvita also allows 100% CO2. Flux core E71T-GS needs no gas at all, which is the whole point of running it outside.
Storing wire
Copper coated wire still rusts if it sits damp, so keep spools dry. The WeldingCity spools come wrapped in moisture resistant plastic film, and the SSIMDER ships vacuum packed too. Open a spool only when the machine is ready for it.
Use as directed. Switch the welder off before changing a spool, since the drive rolls can start with the trigger. Keep the gas cylinder upright and chained when you run solid wire, and weld with ventilation or outdoors with your head out of the fume plume.
FAQ for welders
Is 0.8 mm the same as 0.030 inch wire?
Yes. The listings write 0.030 inch as 0.8 mm and both name the same ER70S-6 wire. When a listing gives only a single size, use the pairing the maker prints rather than guessing.
Can I run flux core wire in my gas MIG welder?
Often, if the machine lists flux core and you set the polarity the wire calls for. Many MIG welders run both solid wire with gas and self shielded flux core. Check the wire label and the machine manual before swapping.
What gas does ER70S-6 need?
CO2 or an Ar/CO2 mix, per the listings here. Straight CO2 is the common choice for the shop; the mix gives a calmer arc. Flux core E71T-GS needs no gas at all.
Will a 10 lb spool fit my welder?
The 10 lb spools here use an 8 inch roll with a 2 in center hole, which fits full size machines. Compact welders often take smaller spools, so measure your hub or check the manual first.
How should I store MIG wire?
Dry and sealed. The listings ship wire vacuum packed or wrapped in moisture resistant film for a reason: damp wire feeds rough and welds porous. Keep spare spools in their packaging until you need them.
Related: how to choose a MIG welder, flux core vs MIG for outdoor use, best MIG wire for thick steel, and the welding consumables hub.
Scoring, line by line
Each wire is scored out of 10 on performance, build, value, safety listing and warranty, with performance counting most. MIG wire carries no electrical safety listing, so every wire here scores zero on that criterion, and no listing states a warranty term, so warranty scores zero too; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| WeldingCity ER70S-6 0.8 mm 2-Pack | 9.5 | 29 | 21 | 22 | 0 | 0 |
| WeldingCity ER70S-6 0.8 mm | 9.5 | 29 | 21 | 21 | 0 | 0 |
| Rumvita ER70S-6 0.8 mm 2-Pack | 9.4 | 28 | 20 | 21 | 0 | 0 |
| SSIMDER E71T-GS 0.8 mm Flux Core | 9.4 | 27 | 20 | 21 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




