Best Metal Saw Horses (2026): 5 Picks for the Shop
Five steel folding saw horses for the shop, compared on load rating per pair, pack size, height adjustment, grip and folding design.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBORA Workhorse XT9.7/10View on Amazon - 2
Highest CapacityBORA Workhorse X9.6/10View on Amazon - 3
Best for GripKlein Tools 661879.6/10View on Amazon - 4
Best Lock and CarryWORKPRO Folding Saw Horses9.5/10View on Amazon
A cut goes wrong when the stock moves, so the stand under it matters as much as the saw above it. This guide rounds up the best metal saw horses for a home shop and a jobsite, and compares them on what each listing states: load rating, pack size, height adjustment, grip and folding design.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall BORA Workhorse XT: Adjustable legs from 30 to 34 inches, 1,350 lb per horse and 2×4 brackets in a 2-pack. Check price on Amazon
- Highest Capacity BORA Workhorse X: 1,350 lb per horse, 2,700 lb per pair, with 2×4 brackets and a single release latch. Check price on Amazon
- Best for Grip Klein Tools 66187: A no-skid top and non-marring boots, rated at 1,300 lb per horse in a 2-pack. Check price on Amazon
- Best Lock and Carry WORKPRO Folding Saw Horses: A lock and carry system that joins the pair, rated at 900 lb per horse with cross braces. Check price on Amazon
The machines

BORA Workhorse XT Saw Horses 2 Pack Adjustable
A 2-pack of folding steel saw horses with legs that adjust from 30 to 34 inches, rated at 1,350 lb per horse, with pre-drilled 2x4 brackets.
Pros
- Legs adjust in 1 inch increments from 30 to 34 inches, the only height adjustment here
- Rated at 1,350 lb per horse, or 2,700 lb per pair
- Pre-drilled 2x4 brackets join horses into a workbench
- Steel leg latches hold a sturdy A frame leg
Cons
- No warranty term is stated
- Legs adjust only from 30 to 34 inches, so lower work needs another stand
- Adjustable legs add parts that must latch before each use
- Sold as a 2-pack, so a buyer who needs one horse buys two

BORA Workhorse X Saw Horses 2 Pack Folding Heavy
A 2-pack of folding all-metal saw horses rated at 1,350 lb per horse, with a single release latch and pre-drilled 2x4 brackets.
Pros
- Rated at 1,350 lb per horse, or 2,700 lb per pair, the highest pair rating here
- A single release latch and gravity assisted deployment open the legs
- Pre-drilled 2x4 brackets join horses into a portable workbench
- Legs fold inside the horse for compact storage
Cons
- No height adjustment, unlike the Workhorse XT
- The 2x4 brackets need lumber, which is not in the box
- Sold as a 2-pack, so a buyer who needs one horse buys two
- At 25.8 pounds, it is heavier than the single CRAFTSMAN horse

Klein Tools 66187 Folding Metal Saw Horses
A 2-pack of folding metal saw horses rated at 1,300 lb per horse, with a no-skid top, non-marring boots and legs that stow inside the beam.
Pros
- Rated at 1,300 lb per horse, or 2,600 lb per pair
- A no-skid top keeps stock stable while you cut
- Non-marring boots help protect the work surface
- Legs stow inside the metal beam for storage
Cons
- No height adjustment
- No pre-drilled 2x4 brackets for joining horses into a bench
- At 25 pounds, it is heavier than the single CRAFTSMAN horse
- A buyer who needs a single horse still buys the pair

WORKPRO Folding Saw Horses 2 Pack
A 2-pack of folding steel saw horses rated at 900 lb per horse, with a lock and carry system, cross braces and anti-wobble legs.
Pros
- Rated at 900 lb per horse, or 1,800 lb per pair
- A lock and carry system joins the pair for transport
- Reinforced cross braces and anti-wobble steel legs steady the stand
- Suits woodworking, cutting, sanding, painting and repairs
Cons
- The lowest pair rating here at 1,800 lb, below the BORA pair
- No height adjustment
- No pre-drilled 2x4 brackets for joining horses into a bench
- The lock and carry system adds a step before the legs open

CRAFTSMAN Metal Sawhorse, Folding (CMST11154)
A single folding metal saw horse with anti-slip rubber pads and side latches that stack two units for carrying, listed with a 1,000 lb load capacity per pair.
Pros
- Anti-slip rubber pads add friction on the surface while cutting
- Side latches stack two units together for carrying and storage
- Folding legs set up and break down fast
- Lists a weight of 5.687 pounds, the lowest stated weight here
Cons
- The lowest pair rating here at 1,000 lb
- Sold as a single horse, so a pair costs two units
- No warranty term is stated
- No pre-drilled 2x4 brackets for joining horses into a bench
Other welders and gear to compare
BORA Speedhorse Saw Horses 2 Pack Folding Heavy Duty MetalCheck price on Amazon
WORKESS Metal Saw Horses 2 pack Folding Heavy Duty 880 lbsCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Load rating (pair) | Pack | Height | Stability |
|---|---|---|---|---|---|
| BORA Workhorse XT | 9.7/10 | 2,700 lb | 2-pack | 30 to 34 in, adjustable | Steel leg latches |
| BORA Workhorse X | 9.6/10 | 2,700 lb | 2-pack | Not stated | Steel leg latches |
| Klein Tools 66187 | 9.6/10 | 2,600 lb | 2-pack | Not stated | No-skid top, non-marring boots |
| WORKPRO Folding Saw Horses | 9.5/10 | 1,800 lb | 2-pack | Not stated | Cross braces, anti-wobble legs |
| CRAFTSMAN CMST11154 | 9.4/10 | 1,000 lb | Single | Not stated | Anti-slip rubber pads |
Ratings in this table are the makers’ own claims taken from each product page (19 November 2026).
Buying guide: what matters in the best metal saw horses
Load rating
Ratings here run from 1,000 lb per pair on the CRAFTSMAN to 2,700 lb per pair on the two BORA models, with Klein at 2,600 lb and WORKPRO at 1,800 lb. Each listing states the rating per horse and per pair, so compare the pair figure when you plan a two horse bench. No listing says how the rating was measured, so keep heavy stock centered and within the stated figure.
Folding and storage
Every horse here folds. The BORA legs fold inside the horse, the Klein legs stow inside the metal beam, the WORKPRO legs collapse for storage, and the CRAFTSMAN folding legs set up and break down fast. The WORKPRO lock and carry system joins the pair for transport, and the CRAFTSMAN side latches let two single units stack for carrying.
Height adjustment
Only the BORA Workhorse XT adjusts in height, from 30 to 34 inches in 1 inch increments, a range of 4 inches. The other four listings state no height figure, so check the stated dimensions against your bench height before ordering.
Tops and grip
The Klein top is no-skid and its boots are non-marring, the CRAFTSMAN has anti-slip rubber pads, and the WORKPRO uses cross braces and anti-wobble steel legs. The BORA models rely on steel leg latches and an A frame leg. Grip matters most when you cut: a top that holds the stock still keeps the blade line true.
Use as directed. Clamp the work to the horse before you cut, wear eye and face protection, keep guards in place on the saw, and keep gloves away from rotating parts. Never exceed the stated load rating, and keep the area under and around the horse clear of anything that can burn when you cut metal. See the OSHA machine guarding guidance and the Safety Disclaimer.
Before You Strike an Arc
- Check the stated load rating per pair before you load the bench, and keep heavy stock centered.
- Confirm each leg latches open before you set stock on the horse.
- Clamp the stock to the horse before the first cut, and keep hands clear of the blade line.
- Check that the pre-drilled 2×4 brackets fit the lumber you plan to use for a bench top.
- On arrival, count the pack: four of these listings are 2-packs and the CRAFTSMAN is a single horse.
FAQ for welders
How much weight can a metal saw horse hold?
It depends on the model. The two BORA horses are rated at 1,350 lb each, or 2,700 lb per pair, the Klein at 1,300 lb each, or 2,600 lb per pair, the WORKPRO at 900 lb each, or 1,800 lb per pair, and the CRAFTSMAN at 1,000 lb per pair. Use the pair figure when you build a bench from two horses, and never exceed the stated rating.
Can you use a metal saw on wood?
A saw made for metal is not the right pick for wood, so fit the blade to the material. The horses themselves suit woodwork fine: the Klein is listed for woodworking, carpenters and contractors, and the WORKPRO lists woodworking, cutting boards and painting among its uses. Clamp the lumber to the horse before you cut, whatever blade you fit.
How do you use a metal chop saw with a saw horse?
Set the horse on flat ground, confirm the legs latch, and clamp the stock to the horse so it cannot move during the cut. Wear eye and face protection, keep the saw guard in place, and keep gloves away from rotating parts. Let the saw do the cutting and never force the blade through the stock.
Do these saw horses fold for storage?
Yes, all five fold. The BORA legs fold inside the horse, the Klein legs stow inside the metal beam, the WORKPRO legs collapse, and the CRAFTSMAN legs fold for setup and breakdown. The WORKPRO pair also locks together for carrying, and the CRAFTSMAN side latches let two units stack.
What is the difference between the BORA Workhorse X and the Workhorse XT?
Both are 2-packs rated at 1,350 lb per horse and 2,700 lb per pair, with pre-drilled 2×4 brackets and steel leg latches. The XT adds legs that adjust in 1 inch increments from 30 to 34 inches, and a built-in bottle opener. The X lists a weight of 25.8 pounds.
Related: welding table vs sawhorse, best welding table for a home shop, best metal chop saw for home shop, metal cutting saw types, chop saw vs band saw for metal, best steel workbench, steel workbench vs welding table, how to build a welding table, and the metalworking machines hub. Also see our metal saws hub. Also see our best circular saw blade for sheet metal. Also see our heavy duty adjustable saw horses. Also see our compact circular saw vs cut off tool. Also see our metal saw tpi. Also see our wheel thin cut abrasives.
Scoring, line by line
Each horse is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Metal saw horses have no electrical safety listing to state and no listing here states a warranty term, so every horse here scores zero on those two criteria; the ranking comes from the other three.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BORA Workhorse XT | 9.7 | 32 | 22 | 21 | n/a | 0 |
| BORA Workhorse X | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Klein Tools 66187 | 9.6 | 29 | 21 | 20 | n/a | 0 |
| WORKPRO Folding Saw Horses | 9.5 | 27 | 20 | 20 | n/a | 0 |
| CRAFTSMAN CMST11154 | 9.4 | 24 | 19 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




