Best Level for Magnetic Drill (2026): 5 Levels Compared
Five magnetic torpedo levels from 4 to 16 inches, compared on vials, magnet hold, frame and stated accuracy for magnetic drill work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWORKPRO 12 Inch Blue9.7/10View on Amazon - 2
Best 12-Inch in RedWORKPRO 12 Inch Red9.7/10View on Amazon - 3
Longest LevelArrow 16-Inch Level9.6/10View on Amazon - 4
Strongest MagnetArrow 4-Inch Level9.6/10View on Amazon - 5
Best 9-InchFirecore 9-Inch Level9.5/10View on Amazon
Setting a magnetic drill on a plate starts with checking whether the drill sits square to the work. A best level for magnetic drill answers that with a magnetic edge that sticks to the drill or the plate while you read the vials. We compared magnetic torpedo levels on length, vials, magnet hold, frame and stated accuracy, using only what each listing publishes.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall WORKPRO 12 Inch Blue: 4 vials with a pitch vial, 0.001-inch per foot accuracy, aluminum frame Check price on Amazon
- Best 12-Inch in Red WORKPRO 12 Inch Red: Same 4-vial aluminum build as the blue model, in red Check price on Amazon
- Longest Level Arrow 16-Inch Level: 16 inch aluminum level with 4 magnets and a V-groove base Check price on Amazon
- Strongest Magnet Arrow 4-Inch Level: 2 magnets grip over 4 lbs on iron, with dual SAE and metric scales Check price on Amazon
- Best 9-Inch Firecore 9-Inch Level: 9 inch ABS level with 3 vials and shockproof rubber end caps Check price on Amazon
The machines

WORKPRO 12 Inch Magnetic Torpedo Level, Blue
A 12 inch aluminum torpedo level with 4 vials, a pitch vial, a V-groove base and a magnetic edge stronger than 2 lbs.
Pros
- 4 vials cover vertical, horizontal, 45° and pitch readings
- Stated accuracy of 0.001-inch per foot
- Aluminum frame with a shock-absorbing structure for daily use
- V-groove bottom fits curved work, with top-view holes for reading
Cons
- No warranty term is stated
- Magnetic force over 2 lbs is lower than the Arrow 4 inch grip over 4 lbs
- Shorter than the 16 inch Arrow for spanning long plates
- Top-view holes only, with no oversized windows like the Arrow 16 inch

WORKPRO 12 Inch Magnetic Torpedo Level
A 12 inch aluminum torpedo level in red with 4 vials, a pitch vial, a V-groove base and a magnetic edge stronger than 2 lbs.
Pros
- 4 vials cover vertical, horizontal, 45° and pitch readings
- Stated accuracy of 0.001-inch per foot (1mm/M)
- Aluminum frame with a shock-absorbing structure for daily use
- V-groove bottom fits curved work, with top-view holes for reading
Cons
- Magnetic force over 2 lbs is lower than the Arrow 4 inch grip over 4 lbs
- Shorter than the 16 inch Arrow for spanning long plates
- Top-view holes only, with no oversized windows like the Arrow 16 inch
- Slope readings come in 1/8 inch per foot increments, with no finer pitch stated

ARROW 16-Inch Level, Magnetic Torpedo Level
A 16 inch aluminum torpedo level with 3 vials, 4 magnets, a V-groove base and precision-milled bases.
Pros
- Longest level here at 16 inches for spanning plates
- 4 magnets hold at 1.5x the level's own weight
- Precision-milled top and bottom bases remove surface deviations
- Oversized viewing windows read from front, back and top
Cons
- No accuracy figure is stated, unlike the WORKPRO pair and the Arrow 4 inch
- 3 vials only, with no pitch vial like the WORKPRO pair
- 16 inch length needs more toolbox room than the 4 inch Arrow
- Too long for pocket carry, unlike the 4 inch Arrow

ARROW 4-Inch Torpedo Level
A 4 inch aluminum torpedo level with 2 magnets gripping over 4 lbs, dual SAE and metric scales and a top-view window.
Pros
- 2 magnets grip over 4 lbs on iron surfaces
- Dual SAE and metric scales double as a ruler
- Weighs 0.24 lbs for pocket carry
- Top-view window reads from front and top angles
Cons
- 2 vials only: 0° and 90°, with no 45° vial
- 4 inch length is too short to span long plates
- No V-groove is stated, unlike the WORKPRO pair and the Arrow 16 inch
- No pitch vial for slope readings, unlike the WORKPRO pair

Torpedo Level Magnetic, Firecore 9 Inch Shockproof
A 9 inch torpedo level with 3 vials, a magnetic base and shockproof rubber end caps.
Pros
- 3 vials cover 0°, 45° and 90° readings
- Magnetic base attaches to metal surfaces
- Shockproof rubber end caps protect the vial and frame if dropped
- Hanging holes keep it off the bench when not in use
Cons
- No warranty term is stated
- ABS plastic frame, not aluminum like the other four
- No magnet force is stated, unlike the WORKPRO pair and the Arrow 4 inch
- No accuracy figure is stated
Spec sheet comparison
| Level | Gear Score | Length | Vials | Magnet | Frame | Accuracy |
|---|---|---|---|---|---|---|
| WORKPRO 12 Inch Blue | 9.7/10 | 12 in | 4 | Over 2 lb | Aluminum | 0.001 in/ft |
| WORKPRO 12 Inch Red | 9.7/10 | 12 in | 4 | Over 2 lb | Aluminum | 0.001 in/ft |
| Arrow 16-Inch Level | 9.6/10 | 16 in | 3 | 4 magnets | Aluminum alloy | Not stated |
| Arrow 4-Inch Level | 9.6/10 | 4 in | 2 | Over 4 lb | Aluminum alloy | 0.5/1000 |
| Firecore 9-Inch Level | 9.5/10 | 9 in | 3 | Magnetic base | ABS plastic | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026.
How to choose the best level for magnetic drill
Length and reach
Lengths here run 4, 9, 12 and 16 inches. The 12 inch WORKPRO pair suits bench plates and general layout, the 16 inch Arrow spans longer work, and the 4 inch Arrow fits a pocket for tight spots around the drill. Pick the length against the plate you drill most. Pair the level with the right drill; see our best magnetic drill press guide.
Vials and stated accuracy
The Arrow 4 inch has 2 vials, the Firecore and the Arrow 16 inch have 3, and the WORKPRO pair has 4 with a pitch vial. A 45° vial covers angle work, and the pitch vial on the WORKPRO pair reads slope in 1/8 inch per foot increments. Only the WORKPRO pair and the Arrow 4 inch state an accuracy figure, so compare those two where a stated figure matters.
Magnet hold
Magnet hold is what keeps the level on the drill or the plate while you work. The WORKPRO pair holds with a force greater than 2 lbs, the Arrow 4 inch grips over 4 lbs on iron with 2 magnets, and the Arrow 16 inch uses 4 magnets at 1.5x its own weight. The Firecore states a magnetic base with no holding figure. Once the drill is square, the cutter does the work; see our best annular cutter for magnetic drill guide.
Frame, V-groove and carry
Four of the five levels have aluminum frames; the Firecore uses ABS plastic. The WORKPRO pair and the Arrow 16 inch have a V-groove base that fits pipe and curved stock, while a flat base works on plate. Shockproof end caps on the Firecore and the Arrow 16 inch protect the vials if the level is dropped, and hanging holes on the Firecore, the WORKPRO pair and the Arrow 4 inch help with storage.
Use as directed. Check the magnet hold before you drill, keep the vial windows clear of chips, clamp the work before the drill starts, and wear eye protection around the drill. Never hang weight from the level or use it past the stated magnet hold. See our Safety Disclaimer.
Before You Strike an Arc
- Check the magnetic edge holds on the drill body or the plate before you trust a reading.
- Set the V-groove on pipe or round stock so the level sits on the curve.
- Read the pitch vial on the WORKPRO pair where a slope reading matters.
- Hang the level by its hanging hole when the job is done so the vials stay protected.
FAQ for welders
What size level fits a magnetic drill?
Lengths here run 4, 9, 12 and 16 inches. The 12 inch WORKPRO pair suits bench plates, the 16 inch Arrow spans longer work, and the 4 inch Arrow fits a pocket for tight spots.
How strong should the magnet be?
The WORKPRO pair holds over 2 lbs, the Arrow 4 inch grips over 4 lbs on iron, and the Arrow 16 inch uses 4 magnets at 1.5x its own weight. The Firecore states a magnetic base with no holding figure.
How many vials does a torpedo level need?
The Arrow 4 inch has 2 vials, the Firecore and the Arrow 16 inch have 3, and the WORKPRO pair has 4 with a pitch vial. A 45° vial covers angle work, and the pitch vial reads slope.
Does a level for a magnetic drill need a V-groove?
The WORKPRO pair and the Arrow 16 inch have a V-groove base for pipe and curved stock. A flat base works on plate, so a V-groove matters only where round work is common.
Do these levels come with a warranty?
None of the listings here states a warranty term. The same holds for safety listings: no level here states one.
Related: best magnetic drill low profile, best drill press, drill press safety, and the metalworking machines hub.
Scoring, line by line
Each level is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No level here states a safety listing or a warranty term, so every level here scores zero on safety listing and warranty; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| WORKPRO 12 Inch Blue | 9.7 | 30 | 22 | 21 | n/a | 0 |
| WORKPRO 12 Inch Red | 9.7 | 30 | 22 | 21 | n/a | 0 |
| Arrow 16-Inch Level | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Arrow 4-Inch Level | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Firecore 9-Inch Level | 9.5 | 27 | 19 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




