Best Goatskin Welding Gloves (2026)
Five goatskin TIG welding gloves compared by cuff length, lining, stitching and warranty, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCaiman Kontour Gloves9.6/10View on Amazon - 2
Best for TIG FeelRevco Black Stallion T509.5/10View on Amazon - 3
Best Glide PatchTillman 1338 Gloves9.5/10View on Amazon - 4
Best All GoatskinBlack Stallion 25G9.4/10View on Amazon - 5
Best LightweightIntra-FIT 5370099.4/10View on Amazon
TIG work wants a glove that lets the filler hand feel the rod without giving up heat protection when the arc runs long. That is the trade the best goatskin welding gloves make: thin, soft goatskin for dexterity, with Kevlar stitching and reinforced palms where sparks land. This roundup scores five goatskin TIG gloves on what each listing states about cuff, lining, stitching and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Caiman Kontour Gloves: TIG, MIG and plasma use, flame-resistant insulated back, padded reinforced palm Check price on Amazon
- Best for TIG Feel Revco Black Stallion T50: Seamless index finger and unlined palm for precise TIG work Check price on Amazon
- Best Glide Patch Tillman 1338 Gloves: Top grain goatskin with Glide Patch and Kevlar stitching Check price on Amazon
- Best All Goatskin Black Stallion 25G: 100% goatskin, unlined, spark and abrasion resistance Check price on Amazon
- Best Lightweight Intra-FIT 537009: Lightweight goatskin with Kevlar stitching and keystone thumb Check price on Amazon
The machines

Caiman Genuine Goatskin Leather White KontourTM
A top grain goatskin TIG and MIG glove with a flame-resistant insulated back, padded reinforced palm and long leather cuff, for welding, plasma cutting and material handling.
Pros
- TIG, MIG and plasma cutting stated
- Flame-resistant insulated back, per the listing
- Padded, reinforced palm and thumb saddle
- Large pulse protector and long leather cuff
Cons
- Only a 30 Day Limited warranty stated
- No cuff length number stated
- Split cowhide back, not full goatskin throughout
- Do Not Wash care stated

Revco Black Stallion (T50)
A premium grain goatskin and flame-resistant cotton TIG glove with DragPatch side reinforcement, a seamless index finger and Kevlar stitching.
Pros
- Premium grain goatskin with flame-resistant cotton
- DragPatch side reinforcement, per the listing
- Seamless index finger for tactile sensitivity
- Kevlar stitching, per the listing
Cons
- No warranty stated
- Mixed lining statements in the listing
- No cuff length stated
- No MIG or plasma use stated, TIG only

Tillman 1338 Top Grain Goatskin TIG Welding Gloves
A top grain goatskin TIG glove with a 4 inch cuff, Glide Patch and Kevlar stitching, unlined with a reinforced palm and thumb.
Pros
- Top grain goatskin with a cowhide cuff
- Glide Patch stated as a special feature
- Kevlar stitching, per the listing
- Reinforced palm and thumb, per the listing
Cons
- No warranty term stated
- No MIG or plasma use stated, TIG only
- No liner beyond unlined stated
- Single stated size here, Large

Black Stallion (25G) Pearl White Goatskin TIG
A pearl white grain goatskin TIG glove, unlined, with spark and abrasion resistance and cut resistance stated.
Pros
- 100% goatskin, per the listing
- Unlined build for feel
- Spark and abrasion resistance stated
- Cut resistance stated as a special feature
Cons
- No warranty term stated
- No stitching type stated
- No cuff length stated
- No MIG or plasma use stated, TIG only

TIG Welding Gloves, Premium Goatskin High
A lightweight premium goatskin TIG glove with Kevlar stitching, spark resistance and a keystone thumb.
Pros
- Premium goatskin with Kevlar stitching
- Spark resistant, per the listing
- Heat resistant, per the listing
- Keystone thumb, per the listing
Cons
- No warranty stated
- No liner stated
- No cuff length stated
- No MIG or plasma use stated, TIG only
Other welders and gear to compare
ABTW Welders GlovesCheck price on Amazon
TOPDC TIG Welding Gloves 14InCheck price on Amazon
Tillman 1338 Top Grain Goatskin TIG Welding Gloves with 4"Check price on Amazon
TIG Welding GlovesCheck price on Amazon
YESWELDER Premium Goatskin TIG Welding Gloves Top GrainCheck price on Amazon
Spec sheet comparison
| Glove | Gear Score | Cuff | Lining | Stitching | Warranty |
|---|---|---|---|---|---|
| Caiman Kontour Gloves | 9.6/10 | Long leather cuff | Unlined palm, insulated back | Kevlar Stitching | 30 Day Limited |
| Revco Black Stallion T50 | 9.5/10 | Not stated | Unlined palm | Kevlar Stitching | Not stated |
| Tillman 1338 Gloves | 9.5/10 | 4 inch cuff | Unlined | Kevlar Stitching | Not stated |
| Black Stallion 25G | 9.4/10 | Not stated | Unlined | Not stated | Not stated |
| Intra-FIT 537009 | 9.4/10 | Not stated | Not stated | Kevlar Stitching | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 28 October 2026.
Buying guide: best goatskin welding gloves
Cuff length decides how far up the forearm sparks and heat reach. Only the Tillman states a cuff length, 4 inches, while the Caiman states a long leather cuff without a number and the other three state no cuff length. A longer cuff matters more for overhead work than for bench TIG, so match the cuff to the position, not just the glove.
Four listings state an unlined build or unlined palm, which the listings link to feel and control for TIG work. The Revco pairs an unlined palm with a seamless index finger for tactile sensitivity, while the Intra-FIT listing states no liner at all. The Revco listing is the mixed case: its bullets state an unlined palm while its spec table lists a flame-resistant fleece liner, and this article follows the bullets.
Four listings state Kevlar stitching; the Black Stallion 25G states no stitching type. The Revco listing states its Kevlar stitching resists heat so seams do not melt, drip or ignite. On processes, only the Caiman states MIG and plasma cutting alongside TIG; the other four state TIG, so a MIG or plasma buyer should start with the Caiman.
All five listings state Large as the size here. The Tillman listing also gives hand circumference sizes from 2XS to 3XL, so a buyer outside Large should check that size chart against their hand before ordering.
Before You Strike an Arc
- Check the cuff: only the Tillman states a cuff length, 4 inches; the Caiman states a long leather cuff.
- Check the lining: four listings state an unlined build or unlined palm, and the Intra-FIT listing states no liner.
- Check the stitching: four listings state Kevlar stitching, and the Black Stallion 25G states no stitching type.
- Check the warranty on arrival: only the Caiman states a term, 30 Day Limited.
- Check the processes: only the Caiman states MIG and plasma cutting alongside TIG.
FAQ for welders
Are goatskin TIG gloves good for MIG welding?
Only one listing here states MIG use: the Caiman, which states MIG and TIG welding plus plasma cutting and material handling. The other four state TIG, so their listings do not promise MIG performance. A buyer who welds MIG should start with the Caiman or look for a listing that states MIG.
What does Kevlar stitching do on a welding glove?
Four listings here state Kevlar stitching. The Revco listing states its Kevlar stitching resists extreme heat so seams do not melt, drip or ignite. The other listings state Kevlar stitching without that explanation, so read the stitching claim as the listing states it.
Should a TIG glove be lined or unlined?
The listings here lean unlined: four state an unlined build or unlined palm, which the listings link to feel and control for TIG work. The Intra-FIT listing states no liner. The Revco listing is mixed, with an unlined palm in its bullets and a flame-resistant fleece liner in its spec table, and this article follows the bullets.
Which glove here states a warranty?
Only the Caiman, with a 30 Day Limited warranty. The Revco states No Warranty, the Intra-FIT states NO for warranty, and the Tillman and Black Stallion listings point to a warranty page without stating a term. Treat those four as stating no warranty term.
Do any of these gloves state a cuff length?
Only the Tillman, with a 4 inch cuff in its title. The Caiman states a long leather cuff without a number, and the other three state no cuff length. Measure the forearm coverage wanted and compare it against the stated cuff before ordering.
Related: see our welding safety gear category, and our gauntlet vs short welding gloves, full grain vs split leather welding gloves, cowhide vs sheepskin welding gloves and kevlar vs leather welding gloves guides.
Scoring, line by line
The Gear Score scores each glove on performance, build, value, safety and warranty, using only what each listing states. No glove here states a certifying standard, so no glove earns safety points here, and only one glove states a warranty term.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Caiman Kontour Gloves | 9.6 | 32 | 22 | 21 | 0 | 2 |
| Revco Black Stallion T50 | 9.5 | 30 | 21 | 21 | 0 | 0 |
| Tillman 1338 Gloves | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Black Stallion 25G | 9.4 | 28 | 20 | 20 | 0 | 0 |
| Intra-FIT 537009 | 9.4 | 28 | 20 | 19 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




