Best Blast Media for Aluminum (2026): 5 Aluminum Oxide Bags Compared
Aluminum oxide blast media bags for aluminum prep, compared on grit, bag size, reuse and wet or dry use.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHDURCIR 80 Grit9.6/10View on Amazon - 2
Fine Matte FinishTITGGI 120 Grit9.6/10View on Amazon - 3
Finest GritIndustrial Mineral Supply 320 Grit9.5/10View on Amazon - 4
Smallest BagKandylio 80 Grit9.4/10View on Amazon
An aluminum part comes off the car or out of the shop with paint, rust or old coating still on it, and the surface underneath needs to be clean before new paint or a weld goes on. The wrong media can cut too deep into soft aluminum or leave a finish that paint will not hold. This guide compares the best blast media for aluminum across aluminum oxide bags in a range of grits, scored on grit, bag size, reuse and wet or dry use, so you can match the bag to the job on the bench.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall HDURCIR 80 Grit: A 14 lb bag of 80 grit for blast cabinets and guns, stated for aluminum and stainless steel prep, usable wet or dry. Check price on Amazon
- Fine Matte Finish TITGGI 120 Grit: 120 grit, 12 lb, for rust and paint removal with a fine matte finish and no free silica stated. Check price on Amazon
- Finest Grit Industrial Mineral Supply 320 Grit: 320 grit ultra fine, 8 lb, for precision work, engraving and deburring on metal, glass and stone. Check price on Amazon
- Smallest Bag Kandylio 80 Grit: A 1 lb bag of 80 grit for small rust removal and paint stripping jobs, reusable after filtering. Check price on Amazon
The machines

Aluminum Oxide 14 LBS 80 GRIT Medium to Fine Sand
A 14 lb bucket of 80 grit aluminum oxide for blast cabinets and guns, stated for aluminum and stainless steel prep, usable wet or dry.
Pros
- Largest bag here at 14 lb
- 80 grit for mill scale, paint and prep on aluminum and stainless steel
- Usable wet or dry, per the maker
- Sturdy plastic bucket for easy carrying
Cons
- 80 grit leaves a coarser finish than the finer bags here
- One grit only, so another bag is needed for a finer finish
- No reuse or cycle life is stated
- No warranty term is stated

TITGGI 120 Grit Aluminum Oxide Blast Media
A 12 lb bucket of 120 grit brown fused aluminum oxide for rust and paint removal with a fine matte finish and no free silica stated.
Pros
- 120 grit for a fine matte finish on rust and paint removal
- Hardness of 9 on the Mohs scale for fast cleaning and etching
- Maker states no free silica in the media
- Longer cycle life than most blast media, per the maker
Cons
- No aluminum workpiece is named in the stated uses
- One grit only, so another bag is needed for a coarser grit
- Fine matte finish does not suit a polished look
- No warranty term is stated

Aluminum Oxide - 12 LBS
A 12 lb bag of 220 grit extra fine brown fused aluminum oxide for cleaning and etching, usable wet or dry.
Pros
- 220 grit extra fine for cleaning and etching
- Brown fused aluminum oxide with high density angular shapes
- Usable wet or dry, per the maker
- 12 lb bag, larger than the 8 lb and 1 lb bags here
Cons
- No aluminum workpiece is named in the stated uses
- No reuse or cycle life is stated
- No bucket or container is stated
- One grit only, so another bag is needed for a coarser grit

Aluminum Oxide Blast Media
An 8 lb bag of 320 grit ultra fine aluminum oxide for precision work, engraving and deburring on metal, glass and stone.
Pros
- 320 grit ultra fine for precision work and engraving
- Maintains sharp edges and cutting power through multiple uses
- High-grade aluminum oxide for consistent performance
- Suits metal, glass and stone surfaces
Cons
- No aluminum workpiece is named in the stated uses
- 8 lb bag is smaller than the 12 and 14 lb bags here
- Wet or dry use is not stated
- One grit only, so another bag is needed for a coarser grit

#80 Grit Aluminum Oxide Blasting Media for All
A 1 lb bag of 80 grit premium grade aluminum oxide for small rust removal, paint stripping and polishing jobs.
Pros
- 80 grit for fast rust removal and paint stripping
- Fits bench cabinets, pressure blasters, siphon blasters and mini cabinets
- Can be filtered and recycled multiple times
- Uniform particle size, per the maker's quality control
Cons
- 1 lb bag is the smallest here, for small jobs only
- No aluminum workpiece is named in the stated uses
- Wet or dry use is not stated
- One grit only, so another bag is needed for a finer finish
Other welders and gear to compare
Aluminum Oxide Blast MediaCheck price on Amazon
TITGGI 120 Grit Aluminum Oxide Blast Media for SandblastingCheck price on Amazon
TITGGI 100 Grit Aluminum Oxide Blast Media for SandblastingCheck price on Amazon
ElaraBerry Paint Removal Blast Media 20/30 MeshCheck price on Amazon
Blast MediaCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Grit | Bag size | Wet or dry | Reuse |
|---|---|---|---|---|---|
| HDURCIR 80 Grit | 9.6/10 | 80 grit | 14 lb | Wet or dry | Not stated |
| TITGGI 120 Grit | 9.6/10 | 120 grit | 12 lb | Wet or dry | Long cycle life, per maker |
| Industrial Mineral Supply 220 Grit | 9.6/10 | 220 grit | 12 lb | Wet or dry | Not stated |
| Industrial Mineral Supply 320 Grit | 9.5/10 | 320 grit | 8 lb | Not stated | Multiple uses |
| Kandylio 80 Grit | 9.4/10 | 80 grit | 1 lb | Not stated | Filter and recycle |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 November 2026.
Buying guide: best blast media for aluminum
Grit size
Grit decides the finish. The two 80 grit bags suit rust removal, paint stripping and mill scale, while the 120 grit bag gives a fine matte finish. The 220 grit bag is extra fine for cleaning and etching, and the 320 grit bag is ultra fine for precision work and engraving. Pick the grit for the finish you need.
Bag size
Bags here run from 1 lb to 14 lb. The 1 lb bag suits one small job, such as a motorcycle frame patch or a small batch of hardware, while the 12 and 14 lb bags suit a blast cabinet that sees regular use. The two 12 lb bags come from different makers, so check the grit before you pick by weight alone. The two bucket packs state easy carrying.
Wet or dry use
The TITGGI 120 grit, the HDURCIR 80 grit and the Industrial Mineral Supply 220 grit bags state wet or dry use. The 320 grit bag and the Kandylio 80 grit bag do not state wet or dry use. If your setup runs wet, stick to a bag that states it.
Reuse and cycle life
The TITGGI maker states its media will not break down as fast as glass blasting media and claims a longer cycle life than most blast media. The Industrial Mineral Supply 320 grit bag maintains its sharp edges and cutting power through multiple uses, and the Kandylio bag can be filtered and recycled multiple times. The HDURCIR and 220 grit bags do not state reuse, so plan on fresh media if you buy those.
Use as directed. Sandblasting throws fine dust into the air, so wear a supplied-air or rated respirator, keep the work area ventilated, and never blast with silica sand, per the OSHA silica rule. Check the grit and bag weight when the order arrives. See our Safety Disclaimer.
Before You Strike an Arc
- Check the grit and bag weight on arrival against what you ordered.
- Confirm the media fits your equipment: the Kandylio bag names bench cabinets, pressure blasters, siphon blasters and mini cabinets.
- Wear a supplied-air or rated respirator before you pull the trigger.
- Check the bucket or bag for damage before you pour.
FAQ for welders
What grit blast media should I use on aluminum?
Match the grit to the finish. An 80 grit bag suits rust removal, paint stripping and mill scale, a 120 grit bag gives a fine matte finish, and 220 and 320 grit bags suit fine cleaning, etching and precision work. Every bag here is aluminum oxide, so the grit is what changes between them.
Can I use aluminum oxide blast media on aluminum?
Yes. The HDURCIR bag states surface preparation of aluminum, along with stainless steel and wood, and aluminum oxide at a hardness of 9 on the Mohs scale cuts and etches metal. The other bags state metal, steel, glass and stone, so check the stated uses on the bag you pick.
Can blast media be reused?
The TITGGI maker claims a longer cycle life than most blast media, the Industrial Mineral Supply 320 grit bag maintains its sharp edges through multiple uses, and the Kandylio bag can be filtered and recycled multiple times. The HDURCIR and 220 grit bags do not state reuse, so do not count on it from those two.
Can I use blast media wet or dry?
It depends on the bag. The TITGGI, HDURCIR and Industrial Mineral Supply 220 grit bags state wet or dry use, while the 320 grit and Kandylio bags do not state it. If your blaster runs wet, pick a bag that states wet use.
How much blast media do I need?
Bags here run from 1 lb to 14 lb. A 1 lb bag suits one small job, while a 12 or 14 lb bag suits a blast cabinet that sees regular use. A small part needs little media, and a cabinet job needs a full bag on hand.
Related: best blast media for aluminum, best sandblasting media for aluminum, blasting media types, glass bead vs aluminum oxide blasting media, best sandblasting gun, sandblasting nozzle size chart, and best abrasive pads for aluminum.
Scoring, line by line
Each bag is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states a safety certification or a warranty term, so every bag gets no points on those two criteria. The ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HDURCIR 80 Grit | 9.6 | 29 | 21 | 21 | n/a | 0 |
| TITGGI 120 Grit | 9.6 | 28 | 20 | 21 | n/a | 0 |
| Industrial Mineral Supply 220 Grit | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Industrial Mineral Supply 320 Grit | 9.5 | 27 | 20 | 20 | n/a | 0 |
| Kandylio 80 Grit | 9.4 | 26 | 19 | 18 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




