Best Sandblasting Gun (2026): 5 Guns Compared
Five sandblasting guns compared by nozzles, feed, pressure, safety features and warranty, for stripping rust and paint from metal at home and in the shop.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallInoKraft Basic Kit9.7/10View on Amazon - 2
Most NozzlesEUMAYES Hose Kit9.5/10View on Amazon - 3
Best Gravity FeedNEIKO 30068A9.5/10View on Amazon - 4
Best for Small PartsHOLDWIN 5-Nozzle Kit9.4/10View on Amazon - 5
Best Basic KitWogoboo Blaster Kit9.4/10View on Amazon
Rust blooming on a trailer frame and paint peeling off a patio chair both need the same fix, and the best sandblasting gun strips the surface back to bare metal without hours of hand sanding. This guide compares the guns by nozzles, feed, pressure, safety features and warranty, using only what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall InoKraft Basic Kit: 287 m/s airflow, 900cc hopper, 1-year warranty Check price on Amazon
- Most Nozzles EUMAYES Hose Kit: 8 ceramic and 4 iron nozzles with a 1 m hose Check price on Amazon
- Best Gravity Feed NEIKO 30068A: 90 PSI, 7 SCFM, 5.0 mm steel nozzle Check price on Amazon
- Best for Small Parts HOLDWIN 5-Nozzle Kit: 5 ceramic nozzles for dead ends and small metals Check price on Amazon
- Best Basic Kit Wogoboo Blaster Kit: Cast aluminum handle, 5 nozzles, quick adapter Check price on Amazon
The machines

Inokraft Leak-Proof Portable Sand Blaster Gun
A leak-proof portable gun with 287 m/s airflow, a 900cc hopper, a 2-in-1 trigger and a 1-year warranty.
Pros
- 287 m/s airflow with a precision ceramic nozzle
- 2-in-1 trigger flows media only when pulled
- 900cc hopper cuts down refills
- 1-year warranty with goggles, connector and media guide included
Cons
- Abrasive no coarser than 46 grit
- 900cc hopper suits small jobs; larger jobs need refills
- 60 to 120 PSI range needs a compressor in that range
- Portable gun with no hose for cabinet use

EUMAYES Sand Blasting Gun Kit Sandblaster Gun
A cabinet gun kit with 8 ceramic and 4 iron nozzles and a 1-meter hose with a metal suction head.
Pros
- 8 ceramic and 4 iron nozzles in different calibers
- 1-meter rubber hose with metal suction head
- Aluminum alloy body with electroplated coating
- Universal quick connector for air compressors
Cons
- 1-meter hose limits reach from the media source
- Made for sandblasting cabinets, not open-air work
- 8 ceramic and 4 iron nozzles to keep track of and store
- Hose needs a separate media container to draw from

NEIKO 30068A Air Sand Blaster Gun | Remove Paint
A gravity feed blaster gun with a 5.0 mm steel nozzle, 90 PSI operation and 7 SCFM air use.
Pros
- Gravity feed hopper takes silicon carbide, baking soda, sand, aluminum oxide, glass and walnut shells
- 5.0 mm replaceable steel nozzle
- 90 PSI operating pressure at 7 SCFM
- Ergonomic handheld grip for home and heavy-duty work
Cons
- No warranty term is stated
- Steel nozzle only; no ceramic nozzle is included
- 7 SCFM air use needs a compressor that can supply it
- Operating pressure of 90 PSI is a single figure, not a range

HOLDWIN Sand Blaster Gun
An aluminum alloy cabinet gun with 5 ceramic nozzles for small metals, dead ends and rusty details.
Pros
- 5 ceramic nozzles included
- Aluminum alloy body, wear resistant
- Takes media from 46 to 240 grit, plus baking soda and glass beads
- Ergonomic grip for long blasting sessions
Cons
- No hose is included
- 7.0 x 6.0 x 2.0 inch size suits small parts and dead ends
- 5 ceramic tips only; no iron nozzle is included
- No air quick connector is included

Wogoboo Sandblaster Kit Abrasive Sand Blasting Gun
A cast aluminum pistol-grip blaster with 1 steel and 4 ceramic nozzles for rims, fences and brickwork.
Pros
- Cast aluminum pistol handle for comfortable grip
- 1 steel nozzle and 4 ceramic nozzles
- Air quick adapter included
- Suits rims, fences, brickwork, glass and aluminum alloy
Cons
- No warranty term is stated
- Only 4 ceramic nozzles, fewer than the 8 in the EUMAYES kit
- No hose is included
- Steel nozzle is 1 piece; spares are ceramic only
Spec sheet comparison
| Gun | Gear Score | Nozzles | Feed | Pressure | Warranty |
|---|---|---|---|---|---|
| InoKraft Basic Kit | 9.7/10 | Ceramic | 900cc hopper | 60-120 PSI | 1 year |
| EUMAYES Hose Kit | 9.5/10 | 8 ceramic, 4 iron | 1 m hose | Not stated | Not stated |
| NEIKO 30068A | 9.5/10 | 5.0 mm steel | Gravity feed | 90 PSI | Not stated |
| HOLDWIN 5-Nozzle Kit | 9.4/10 | 5 ceramic | Not stated | Not stated | Not stated |
| Wogoboo Blaster Kit | 9.4/10 | 1 steel, 4 ceramic | Not stated | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (14 November 2026).
Buying guide: how to choose the best sandblasting gun
Nozzles decide the finish
Nozzle count runs from 1 on the NEIKO to 8 ceramic and 4 iron on the EUMAYES kit, in different calibers. The HOLDWIN kit lists 5 ceramic tips, the Wogoboo kit lists 1 steel nozzle and 4 ceramic nozzles, and the InoKraft kit lists ceramic nozzles. Ceramic suits long blasting sessions, while steel and iron nozzles take the wear of heavy grit.
Feed: hopper, gravity or hose
The InoKraft gun carries a 900cc hopper that cuts down refills, and the NEIKO feeds by gravity from its hopper. The EUMAYES kit draws media through a 1-meter rubber hose with a metal suction head. The HOLDWIN and Wogoboo kits ship as gun and nozzles only, with no hose in the box.
Pressure and air use
Two guns give pressure figures. The InoKraft runs on 60 to 120 PSI, and the NEIKO lists an operating pressure of 90 PSI with air use of 7 SCFM. No operating pressure is given for the other three, so check the compressor against the gun before ordering.
Media and grit
Grit limits matter. The InoKraft takes abrasive no coarser than 46 grit, the NEIKO lists aluminum oxide from #46 to #100, and the HOLDWIN takes non-metallic media from 46 to 240 grit. The NEIKO hopper takes silicon carbide, baking soda, sand, aluminum oxide beads, glass and walnut shells, and the InoKraft works with aluminum oxide, soda and glass beads.
Use as directed. Wear a supplied-air or rated respirator, eye protection and gloves, and use no silica sand, per the OSHA silica rule. Never point the gun at people or animals, and check the pressure range before pulling the trigger. See the OSHA silica rule and our Safety Disclaimer.
Before You Strike an Arc
- Check the pressure: the InoKraft runs on 60 to 120 PSI, the NEIKO on 90 PSI.
- Check the media: the InoKraft takes abrasive no coarser than 46 grit, the NEIKO lists aluminum oxide #46 to #100.
- Check the nozzles on arrival: the EUMAYES kit lists 8 ceramic and 4 iron nozzles, the HOLDWIN kit lists 5 ceramic tips.
- Fit the hose where the kit includes one: the EUMAYES kit lists a 1-meter rubber hose with a metal suction head.
- Wear gloves and protective equipment, as the HOLDWIN tip advises.
FAQ for welders
What pressure do these sandblasting guns need?
The InoKraft runs on 60 to 120 PSI, and the NEIKO lists an operating pressure of 90 PSI. The other three give no operating pressure, so match the gun to the compressor on hand.
Which sandblasting gun has a warranty?
Only the InoKraft, at 1 year. The other four state no warranty term.
How many nozzles come with each kit?
The EUMAYES kit lists 8 ceramic and 4 iron nozzles, the HOLDWIN kit lists 5, and the Wogoboo kit lists 5. The NEIKO lists a single 5.0 mm steel nozzle, and the InoKraft kit lists ceramic nozzles without a count.
What media can these guns use?
The NEIKO hopper takes silicon carbide, baking soda, sand, aluminum oxide beads, glass and walnut shells. The HOLDWIN takes non-metallic media from 46 to 240 grit, including baking soda, glass beads, walnut and garnet, and the InoKraft works with aluminum oxide, soda and glass beads.
Can these guns blast inside a cabinet?
Three of them name cabinets. The EUMAYES, Wogoboo and HOLDWIN kits are made for sandblast cabinets. The InoKraft is a portable gun for garage or outdoor work, and the NEIKO is a handheld gun for home and heavy-duty work.
Related: best sandblasting media for aluminum, best air compressor for sandblasting, sandblasting nozzle types, the sandblasting hub, and the metal finishing hub.
Scoring, line by line
Each gun is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For a sandblasting gun, safety means a trigger that stops media flow, included eye protection and a stated pressure range. Only the InoKraft scores on safety here, with a 2-in-1 trigger and included goggles, and only it states a warranty term.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| InoKraft Basic Kit | 9.7 | 32 | 22 | 21 | 7 | 2 |
| EUMAYES Hose Kit | 9.5 | 30 | 21 | 21 | 0 | 0 |
| NEIKO 30068A | 9.5 | 29 | 21 | 20 | 0 | 0 |
| HOLDWIN 5-Nozzle Kit | 9.4 | 28 | 20 | 20 | 0 | 0 |
| Wogoboo Blaster Kit | 9.4 | 27 | 20 | 19 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




