Best Sandblasting Media (2026): 5 Abrasives Compared
Five sandblasting abrasives compared by material, grit or mil profile, bag weight, reuse claims, and stated surfaces for cabinets, guns and coating prep.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Overall10X EpiX MP 50lb9.7/10View on Amazon - 2
Best Coarse CutINTERACTIVIA #46 12lb9.6/10View on Amazon - 3
Best Fine FinishINTERACTIVIA #180 19lb9.6/10View on Amazon - 4
Best Bucket PackHDURCIR 80 Grit 8lb9.5/10View on Amazon
A rusted bracket or a painted wheel on the bench needs clean, even metal before primer or powder, and the best sandblasting media decides how fast that prep goes and what profile it leaves. Pick the grit and material for the job in front of you, not by habit. We compared five abrasives on what each maker states: material, grit or profile, weight, reuse, and the surfaces each one names.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall 10X EpiX MP 50lb: 50lb bag with a stated 1.0-2.0 mil profile for coating prep Check price on Amazon
- Best Coarse Cut INTERACTIVIA #46 12lb: #46 coarse aluminum oxide for heavy rust and scale Check price on Amazon
- Best Fine Finish INTERACTIVIA #180 19lb: #180 fine aluminum oxide in a 19.0 pound bag Check price on Amazon
- Best Bucket Pack HDURCIR 80 Grit 8lb: 80 grit in a plastic bucket, stated for wet or dry use Check price on Amazon
The machines

EpiX MP Superoxalloy Abrasive Media
A 50lb superoxalloy abrasive stated to leave a 1.0-2.0 mil profile for powder coating and Cerakote prep.
Pros
- Stated 1.0-2.0 mil profile for repeatable coating prep
- Positioned as a replacement for 80, 90, 100 and 120 ANSI grits
- Largest stated supply here at 50.0 pounds
- Maker states low-to-no embedment and delayed rust bloom
Cons
- A 50.0 pound bag is heavy to move and store
- No ANSI grit number is stated for direct grit matching
- No wet use is stated
- No warranty term is stated

#46 Aluminum Oxide - 12 LBS
A 12 LBS coarse aluminum oxide with sharp angular grit for aggressive cutting on metal, glass, stone and wood.
Pros
- Coarse #46 grit for aggressive rust and scale removal
- Maker states sharp angular, highly reusable grit
- Maker states no detectable crystalline silica
- Non-reactant, stated not to interfere with coatings
Cons
- Coarse #46 grit leaves a rough finish for fine coating work
- No wet use is stated
- No Mohs hardness figure is stated
- No warranty term is stated

#180 Aluminum Oxide - 19 LBS
A 19 LBS fine aluminum oxide with sharp angular grit for finer finishes in cabinets and blasting guns.
Pros
- Fine #180 grit for smoother finishes than coarse media
- Maker states sharp angular, highly reusable grit
- Maker states no detectable crystalline silica
- Largest aluminum oxide supply here at 19.0 pounds
Cons
- Fine #180 grit cuts slower on heavy rust and scale
- No wet use is stated
- No Mohs hardness figure is stated
- At 19.0 pounds the bag is heavy for small cabinets

Aluminum Oxide 8 LBS 80 GRIT Medium to Fine Sand
An 8 LBS 80 grit aluminum oxide in a plastic bucket, stated for wet or dry use in cabinets and guns.
Pros
- Hardness of 9 on the Mohs scale stated
- Stated for wet or dry blasting
- Plastic bucket stated for carrying and storage
- Maker names stainless steel, aluminum, wood and glass etching
Cons
- At 8.0 pounds it is a small supply for cabinet refills
- 80 grit is a middle cut, neither coarse stripping nor fine finishing
- No reuse or cycle life figure is stated
- No silica content statement is given

Ninesung #80 Grit Aluminum Oxide Sandblasting
An 8 oz pack of #80 grit brown aluminum oxide in reusable foil bags, stated for wet or dry use.
Pros
- Hardness of 9 on the Mohs scale stated
- Maker states no free silica and 100% recycled media
- Stated for wet or dry blasting
- Reusable aluminum foil bags stated for carrying
Cons
- At 8 ounces it is too small for cabinet work
- 80 grit is a middle cut, neither coarse stripping nor fine finishing
- No specific gravity or density figure is stated
- Small pack runs out fast on anything beyond a short job
Spec sheet comparison
| Media | Gear Score | Material | Grit / Profile | Weight | Packaging |
|---|---|---|---|---|---|
| 10X EpiX MP 50lb | 9.7/10 | Superoxalloy | 1.0-2.0 mil profile | 50.0 pounds | Bag |
| INTERACTIVIA #46 12lb | 9.6/10 | Aluminum oxide | #46, coarse | 12.0 pounds | Not stated |
| INTERACTIVIA #180 19lb | 9.6/10 | Aluminum oxide | #180, fine | 19.0 pounds | Not stated |
| HDURCIR 80 Grit 8lb | 9.5/10 | Aluminum oxide | 80 grit | 8.0 pounds | Plastic bucket |
| ninesung #80 8oz | 9.2/10 | Brown aluminum oxide | #80 grit | 8 ounces | Aluminum foil bags |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026.
Buying guide: choosing the best sandblasting media
Grit size and profile
Grit numbers run coarse to fine, and the profile is the tooth the blast leaves for coating grip. The INTERACTIVIA #46 is stated as coarse for aggressive cutting, the HDURCIR and ninesung are stated at 80 grit, and the INTERACTIVIA #180 is stated as fine. The 10X EpiX MP works differently: the maker states a 1.0-2.0 mil profile and positions it as a replacement for 80, 90, 100 and 120 ANSI grits for powder coating and Cerakote work, with an SP 5 finish. Match coarse media to heavy rust and scale, and finer media or a stated mil profile to coating prep where the finish matters.
Aluminum oxide and superoxalloy
Four picks here are aluminum oxide. The HDURCIR and ninesung makers state a hardness of 9 on the Mohs scale, and the INTERACTIVIA maker states sharp angular grit, high density with a specific gravity of 3.9, and bulk density of 115-125lbs. The 10X pick is a superoxalloy abrasive, and its maker states low-to-no embedment and delayed rust bloom for cleaner surfaces before coating. Readers blasting light metal can also check our guide to the best blast media for aluminum.
Weight, reuse and packaging
Cabinet work eats media, so bag weight and reuse claims matter. The 10X bag is stated at 50.0 pounds, the INTERACTIVIA #180 at 19.0 pounds, the INTERACTIVIA #46 at 12.0 pounds, the HDURCIR at 8.0 pounds in a plastic bucket, and the ninesung at 8 ounces in reusable aluminum foil bags. The INTERACTIVIA and ninesung makers state their aluminum oxide is highly reusable or long-lasting, and each states it lasts 10 times longer than silica, which is the makers’ claim. The small ninesung pack suits a short job or a trial run, while the larger bags suit cabinet refills. For gun choice, see our best sandblasting gun guide.
Wet or dry, and named surfaces
Wet blasting keeps dust down on some setups, and dry blasting suits cabinets. The HDURCIR and ninesung makers state their media can be used wet or dry. The HDURCIR maker names mill scale and paint removal, surface preparation of stainless steel, aluminum and wood, and etching glass. The ninesung maker names glass, granite, marble, ceramic and steel. The INTERACTIVIA maker names metal, glass, stone and wood, and states the media is non-reactant so it will not interfere with coatings during surface prep. Air supply matters too, so check our best air compressor for sandblasting guide before you blame the media for a weak cut.
Use as directed. Blasting makes dust, so wear a supplied-air or rated respirator and eye protection, and never blast with silica sand. Keep the work area ventilated, keep bystanders clear, and follow the media maker’s directions and your cabinet or gun manual.
Before You Strike an Arc
- Confirm the grit or mil profile on the bag matches the coating or finish you plan, especially the stated 1.0-2.0 mil profile on the 10X pick.
- Check the stated bag weight against your cabinet size so you do not run short mid-job.
- Keep media dry and sealed between uses, in the stated plastic bucket or foil bags where provided.
- Have a rated respirator and eye protection ready before the first blast, not after dust is in the air.
FAQ for welders
What grit sandblasting media should I start with?
Start coarse for heavy rust and scale, and finer for coating prep. Here the INTERACTIVIA #46 is stated as coarse, the HDURCIR and ninesung at 80 grit, the INTERACTIVIA #180 as fine, and the 10X states a 1.0-2.0 mil profile.
Can aluminum oxide blast media be reused?
The INTERACTIVIA maker states its aluminum oxide is highly reusable, and the ninesung maker states a longer cycle life than most blast media. Screen out debris and fines before reuse, as each maker directs.
Which media here can be used wet or dry?
The HDURCIR and ninesung makers state their aluminum oxide can be used wet or dry. The other three picks do not state wet use.
Do these abrasives contain silica?
The INTERACTIVIA maker states no detectable crystalline silica, and the ninesung maker states no free silica. The other picks do not state silica content, and none of the five is silica sand.
What profile does the 10X EpiX MP leave?
The maker states a uniform 1.0-2.0 mil blast profile, an SP 5 finish, and positioning as a replacement for 80, 90, 100 and 120 ANSI grits for powder coating and Cerakote applications.
Related: best sandblasting gun, best blast media for aluminum, best air compressor for sandblasting, sandblasting vs bead blasting, media blast vs sandblast, and the sandblasting hub and the metal finishing hub. Also see our best sandblasting media for aluminum. Also see our best large sandblasting cabinet.
Scoring, line by line
Each abrasive is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of the five listings states a safety standard or a warranty term, so every pick scores zero on those two criteria and the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| 10X EpiX MP 50lb | 9.7 | 30 | 21 | 22 | n/a | 0 |
| INTERACTIVIA #46 12lb | 9.6 | 29 | 20 | 21 | n/a | 0 |
| INTERACTIVIA #180 19lb | 9.6 | 28 | 20 | 21 | n/a | 0 |
| HDURCIR 80 Grit 8lb | 9.5 | 27 | 19 | 18 | n/a | 0 |
| ninesung #80 8oz | 9.2 | 23 | 18 | 10 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




