Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Bench Vise Under 50 (2026): 4 Shop Picks

Four bench vises under 50 dollars compared on jaw width, opening, throat depth, swivel base, material and warranty, scored for the home shop.

Best Bench Vise Under 50 (2026): 4 Shop Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Forward 1304 4-Inch Bench ViseBest OverallForward 1304 4-Inch Bench Vise9.7/10View on Amazon
  2. 2ROLIN 4-1/2-Inch Bench ViseWidest JawROLIN 4-1/2-Inch Bench Vise9.5/10View on Amazon
  3. 3Nakkaa 4-Inch Bench ViseBest SwivelNakkaa 4-Inch Bench Vise9.4/10View on Amazon
  4. 4ZGJDYSM 3.3-Inch Table ViseEasiest MountZGJDYSM 3.3-Inch Table Vise9.3/10View on Amazon

A bench vise is the third hand on your workbench. When the metal needs to stay put for sawing, filing, drilling or tapping, a solid vise keeps both hands free for the work. The best bench vise under 50 locks stock down tight without costing more than the project sitting in its jaws. We compared four vises on jaw width, max opening, throat depth, swivel base, iron type and warranty, using only what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Forward 1304 4-Inch Bench Vise: Ductile iron at 60,000 PSI, 4,400 lbs clamping, replaceable jaws and a 1-year warranty. Check price on Amazon
  • Widest Jaw ROLIN 4-1/2-Inch Bench Vise: 4.5-inch jaw with 240-degree swivel, built-in pipe jaws and an anvil surface. Check price on Amazon
  • Best Swivel Nakkaa 4-Inch Bench Vise: Ductile cast iron with 360-degree rotation and 20KN clamping, spec table conflicts noted. Check price on Amazon
  • Easiest Mount ZGJDYSM 3.3-Inch Table Vise: Clamp-on or screw-mount 3.3-inch vise with 360-degree rotation and a 1-year warranty. Check price on Amazon

The machines

Forward 1304 4 Inch Bench Vise Workbench Vise

Forward 1304 4 Inch Bench Vise Workbench Vise

Forward9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-inch ductile iron bench vise with 4,400 lbs of clamping force, a 120-degree swivel base, replaceable microgroove jaws and a stated 1-year warranty. The strongest materials, the most complete specifications and the clearest warranty in this group make it the top pick.

Pros

  • Ductile iron rated at 60,000 PSI, described as 3x stronger than gray iron
  • 4,400 lbs clamping force with replaceable microgroove steel top jaws
  • 120-degree swivel base with dual locking nuts and 3 mounting bolts included
  • 1-year limited parts replacement warranty stated in the listing

Cons

  • 4-inch jaw width is narrower than the 4.5-inch ROLIN
  • 2 3/8-inch throat depth is the shallowest of the full-size vises here
  • Listing calls it light duty despite the ductile iron build
  • Red finish will show shop wear and paint chips over time
Vise Bench Vise 4-1/2 Inch With 240 Degree Swivel

Vise Bench Vise 4-1/2 Inch With 240 Degree Swivel

ROLIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4.5-inch gray iron bench vise with a 240-degree swivel base, built-in pipe jaws and an anvil surface. The widest jaw and the deepest throat here, built for holding larger stock, pipe and tube.

Pros

  • 4.5-inch jaw width is the widest in this group
  • 240-degree swivel base locks at any angle for positioning
  • Built-in pipe jaws hold 0.6 to 1.85-inch pipe and tube
  • Anvil surface 1.93 x 1.97 inches for striking and forming work

Cons

  • Gray iron is weaker than the ductile iron of the Forward and Nakkaa
  • No warranty term is stated anywhere in the listing
  • 7000KN clamping force figure is not credible for a bench vise and goes unexplained
  • 4.77 kg is light for a 4.5-inch vise, which affects stability under hammering
Nakkaa 4" Bench Vise Ductile Cast Iron Bench Vise

Nakkaa 4" Bench Vise Ductile Cast Iron Bench Vise

Nakkaa9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-inch ductile cast iron bench vise with a 360-degree swivel base, 20KN clamping force and replaceable steel jaws. Good materials and full rotation, but the listing contradicts itself on the maximum jaw opening.

Pros

  • Ductile cast iron with quenching and re-fire hardening per the listing
  • 360-degree swivel base for full rotation without repositioning
  • Replaceable microgroove tooth steel jaws for grip
  • 20KN clamping force stated with a textured non-slip jaw surface

Cons

  • No warranty term is stated anywhere in the listing
  • 2-inch throat depth is shallow for taller workpieces
  • 11 lb weight is the heaviest here but still light for a 4-inch cast vise
Table Vise, 3.3" Jaw Width

Table Vise, 3.3" Jaw Width

ZGJDYSM9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3.3-inch clamp-on table vise with 360-degree rotation, quick-adjust jaws and a stated 1-year unconditional warranty. The smallest and lightest here, built for light work, small parts and benches that cannot be drilled.

Pros

  • Clamp-on or screw-mount 2-in-1 installation, no drilling needed in clamp mode
  • 360-degree rotating base for flexible angle adjustment
  • 1-year unconditional replacement warranty stated
  • 4.8 lb weight lifts on and off the bench with one hand

Cons

  • 3.3-inch jaw and 2.4-inch max opening are the smallest in this group
  • Light-duty build, not suited to heavy hammering or large stock
  • Alloy steel and rubber construction, not cast iron
  • Clamp mode fits workbenches up to 3.94 inches thick only

Other welders and gear to compare

Spec sheet comparison

Model Jaw width Max opening Throat depth Swivel Material Warranty
Forward 1304 4 in 4 in 2 3/8 in 120-degree Ductile iron 1-year limited parts
ROLIN 4-1/2 in 4.5 in 4.3 in 3 in 240-degree Gray iron Not stated
Nakkaa 4 in 4 in 3.5 in (bullets) 2 in 360-degree Ductile cast iron Not stated
ZGJDYSM 3.3 in 3.3 in 2.4 in Not stated 360-degree Alloy steel, rubber 1-year replacement

Ratings in this table are the makers’ own claims taken from each product page (22 October 2026). Where a listing states a figure two ways, the table shows both.

Buying guide: what matters in the best bench vise under 50

Jaw width, max opening and throat depth

These three numbers define what the vise can hold. Jaw width is the clamping surface: the ROLIN leads at 4.5 inches, the Forward and Nakkaa sit at 4 inches, and the ZGJDYSM trails at 3.3 inches. Max opening is how wide the jaws spread: the ROLIN opens to 4.3 inches, the Forward to 4 inches, and the Nakkaa bullets state 3.5 inches. Throat depth is how deep a workpiece can sit between the jaws: the ROLIN gives 3 inches, the Forward 2 3/8 inches, and the Nakkaa 2 inches. Match all three to the stock you actually hold, not just the jaw width on the box.

Ductile iron versus gray iron

The Forward and Nakkaa list ductile iron or ductile cast iron, while the ROLIN lists gray iron casting. The Forward listing rates its ductile iron at 60,000 PSI and calls it 3x stronger than gray iron vises. For a vise that will see hammering, prying and heavy clamping, the iron type matters more than the paint color. The ZGJDYSM lists alloy steel and rubber, which suits its light-duty clamp-on role but not heavy shop abuse.

Swivel base: how much rotation do you need

All four vises swivel, but the range differs. The Nakkaa and ZGJDYSM state 360-degree rotation for full positioning. The ROLIN states a 240-degree swivel base that locks at any angle. The Forward states a 120-degree rotating base with dual locking nuts. More rotation helps when the work needs an angle the bench does not offer, but the lock must hold: the Forward dual locking nuts and the 3-bolt mounting are the most completely described here.

Clamping force: reading the numbers with care

The Forward states 4,400 lbs of clamping force and the Nakkaa states 20KN. The ROLIN states a maximum clamping force of 7000KN, which is not a credible figure for a bench vise of this size and goes unexplained in the listing, so we treat it as a listing error. When a force figure looks wrong, compare the iron type, the jaw size and the weight instead: those tell you more about what the vise will survive.

Bolt-down versus clamp-on mounting

The Forward, ROLIN and Nakkaa are bolt-down vises that need holes in the bench. The Forward ships 3 mounting bolts, and the Nakkaa lists 3 mounting holes. The ZGJDYSM is the only clamp-on option: it clamps to benches up to 3.94 inches thick or screws down with the included screws. If you rent your shop or refuse to drill the bench, the clamp-on vise is the only pick here that works.

Warranty in writing

Two listings state a warranty and two do not. The Forward promises a 1-year limited parts replacement and the ZGJDYSM promises a 1-year unconditional replacement. The ROLIN and Nakkaa listings state no warranty term, which scores nothing on warranty. For a tool that takes hammering, a warranty in writing is worth more than a force figure that does not add up.

Jaw surface and replaceable jaws

The Forward and Nakkaa list replaceable microgroove steel jaws with a textured or tooth pattern for grip. Replaceable jaws matter because the jaw face takes the abuse: pipe teeth bite in, hammering mars the surface, and a vise with replaceable jaws can be refreshed instead of replaced. The ROLIN and ZGJDYSM listings do not mention replaceable jaws. When two vises are otherwise close, the one with replaceable jaws wins on long-term value.

Weight and stability on the bench

The four vises range from 4.8 lb (ZGJDYSM) to 5.13 kg (Nakkaa), with the Forward at 5.02 kg and the ROLIN at 4.77 kg. Weight is not everything, but a vise that walks across the bench under load is a vise that is too light for the job. Bolt-down mounting compensates for lighter castings: the Forward 3-bolt mounting and the Nakkaa 3-hole base anchor the vise solid. The ZGJDYSM clamp-on design trades mass for portability, which suits light work but not heavy hammering.

Pipe jaws and specialty features

Only the ROLIN lists built-in pipe jaws, sized for 0.6 to 1.85-inch pipe and tube. Pipe jaws are V-shaped jaws below the main jaws that grip round stock without crushing it. If your work includes pipe, conduit or round bar, the ROLIN is the only pick here with that feature stated. The ZGJDYSM lists multifunctional jaws with soft jaws for protecting finished work, which suits delicate parts but not pipe. Buy the specialty feature you will actually use; a pipe jaw you never need is just a heavier vise.

Before You Strike an Arc

  • Check the mounting before you buy: the Forward ships 3 bolts, the Nakkaa needs 3 holes, and the ZGJDYSM clamps to benches up to 3.94 inches thick.
  • Verify the swivel lock holds under load: the Forward dual locking nuts are the most completely described locking here.
  • Confirm the max opening against your typical stock: the Nakkaa bullets state 3.5 inches, not the 4.72 inches in its spec table.
  • Read the warranty terms: the Forward and ZGJDYSM state a 1-year term, while the ROLIN and Nakkaa state none.
  • Inspect the jaws on arrival: the Forward and Nakkaa list replaceable microgroove steel jaws, so check they sit flat and tight.

FAQ for welders

What size bench vise do I need for a home shop?

A 4 to 4.5-inch jaw covers most home shop work: sawing, filing, drilling and tapping small to medium stock. The ROLIN at 4.5 inches gives the most jaw here, while the Forward and Nakkaa at 4 inches suit general work. Check the max opening too, not just the jaw width: the Forward opens to 4 inches and the ROLIN to 4.3 inches. The 3.3-inch ZGJDYSM with its 2.4-inch opening is for light tasks and small parts, not full-size metalwork.

Can I hammer on a bench vise anvil?

The Forward and ROLIN list an anvil surface: 1.65 by 1.65 inches on the Forward and 1.93 by 1.97 inches on the ROLIN. Light forming and straightening on the anvil is what it is for. Heavy hammering on a light vise risks the casting, and gray iron is less forgiving than ductile iron.

Do I need a swivel base?

A swivel base helps when the work needs an angle the bench does not offer. The Nakkaa and ZGJDYSM give 360-degree rotation, the ROLIN gives 240 degrees, and the Forward gives 120 degrees. If you always work straight on, a fixed base would do, but every vise here swivels.

How do I mount a bench vise to my workbench?

Three of the four are bolt-down: drill through the bench and bolt them solid. The Forward ships 3 bolts and the Nakkaa lists 3 mounting holes. The ZGJDYSM clamps on without drilling, fitting benches up to 3.94 inches thick, or screws down with the included screws.

Is ductile iron better than gray iron for a vise?

The Forward listing rates its ductile iron at 60,000 PSI and calls it 3x stronger than gray iron. Ductile iron resists cracking under shock loads better than gray iron, which matters when the vise takes hammering or heavy clamping. The Nakkaa also lists ductile cast iron, while the ROLIN lists gray iron casting.

Scoring, line by line

Each vise is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. The published score tables and product cards show the final Gear Score for each pick.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Forward 1304 4-Inch Bench Vise 9.7 30 21 20 n/a 3
ROLIN 4-1/2-Inch Bench Vise 9.5 27 16 20 n/a 0
Nakkaa 4-Inch Bench Vise 9.4 24 19 19 n/a 0
ZGJDYSM 3.3-Inch Table Vise 9.3 16 15 18 n/a 3

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More welding guides

Also see our best bench vise for farm shop. Also see our bench vise vs welding vise. Also see our best welding vise under 50. Also see our best heavy duty bench vise.

More buying guides

Welding Tables and Carts ·

Bench Vise Parts: Names and What Each Does

Bench vise parts are the jaws, screw, handle, slide and base that hold work still, and this guide names each one and shows how…