Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

5/32 vs 1/8 Welding Rod: Which One Should You Buy?

5/32 vs 1/8 welding rod compared: diameter, deposition and amperage differences, plus four listed 5/32 rods ranked, from an E7018 10 lb box to a hardfacing 1 lb pack.

5/32 vs 1/8 Welding Rod: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Victory Welding Alloys 6010 Welding Rod 5/32" E6010 5/32" 5Victory Welding Alloys 6010 Welding Rod 5/32" E6010 5/32" 59.6/10View on Amazon
  2. 250 lb Steel Can E6010 5/32" Stick electrodes welding rod50 lb Steel Can E6010 5/32" Stick electrodes welding rod9.6/10View on Amazon
  3. 3Forney 31105 E6011 Welding RodForney 31105 E6011 Welding Rod9.6/10View on Amazon
  4. 4Forney 31310 E6011 Welding RodForney 31310 E6011 Welding RodView on Amazon
  5. 5Victory Welding Alloys 6011 Welding Rod 5/32" E6011 5/32" 5Victory Welding Alloys 6011 Welding Rod 5/32" E6011 5/32" 5View on Amazon
  6. 6Victory Welding Alloys 7018 Welding Rod 5/32" E7018 5/32" 5Victory Welding Alloys 7018 Welding Rod 5/32" E7018 5/32" 5View on Amazon
  7. 7Victory Welding Alloys 7014 Welding Rod 5/32" E7014 5/32" 5Victory Welding Alloys 7014 Welding Rod 5/32" E7014 5/32" 5View on Amazon
  8. 8Victory Welding Alloys 6013 Welding Rod 5/32" E6013 5/32" 5Victory Welding Alloys 6013 Welding Rod 5/32" E6013 5/32" 5View on Amazon
  9. 9Forney 30510 E6013 Welding RodForney 30510 E6013 Welding RodView on Amazon

5/32 vs 1/8 welding rod: pick the diameter for the steel. A 5/32 in rod deposits more metal per pass and runs hotter, so it suits thicker steel and bigger joints. A 1/8 in rod deposits less and runs cooler, so it suits thinner stock where burn-through is the risk. The four products in this guide are all 5/32 in rods, which is where the current listings compete; the 1/8 side is explained from the diameter difference itself.

Other welders and gear to compare

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Below: what each diameter means on the job, the four listed 5/32 rods ranked, and how to pick by the steel.

5/32 vs 1/8 welding rod: the quick answer

Welding thicker steel, filling bigger joints or building up worn parts is 5/32 work: the larger diameter carries more current and lays down more metal per pass. Welding thinner sheet, small brackets or anything where you fear blowing through is 1/8 work: the smaller rod runs cooler and gives more control. The listings here are all 5/32 because that is the diameter for structural and repair work: E6011 for dirty steel, E7018 for low-hydrogen structural welds, and a hardfacing rod for abrasion. If your stock is thin, you are shopping the 1/8 side, which none of these four listings is.

Side by side

Rod Diameter Type Amperage (stated) Pack Warranty (stated)
YESWELDER E7018 5/32 in E7018 low-hydrogen 150-220A 10 lb Not stated
Forney E6011 31310 5/32 in E6011 Up to 170A 10 lb 90 days
Blue Demon E7018 5/32 in E7018 low-hydrogen Not stated 5 lb tube Not stated
Forney 42401 Hardfacing 5/32 in Hardfacing Not stated 1 lb 90 days

The table below lists the four rods in this guide, all 5/32 in, with the diameter, type, stated amperage, pack and warranty each listing states.

What a 5/32 welding rod does

A 5/32 in stick rod is the step up in deposition: thicker core wire, higher amperage, more metal per pass. The listings show the three flavors. The YESWELDER E7018 is the low-hydrogen structural rod: 5/32 in by 14 in, 10 lb, all positions on AC or DC reverse polarity, recommended amperage 150 to 220A, pitched for x-ray quality welds on medium and high carbon steels, structurals, offshore and power plant work. The Forney E6011 31310 is the dirty-steel rod: 5/32 in, 10 lb, deep penetration and fast freezing on dirty, rusty, painted and galvanized steel, all positions, AC dependable with DC+ possible, up to 170A and 60,000 tensile strength. The Blue Demon is a second E7018 option in a 5 lb tube, 5/32 by 14 in, low hydrogen, with a sparse listing. The Forney 42401 Supercote is the specialist: a 5/32 in hardfacing rod in a 1 lb pack for moderate abrasion and low impact, crack resistant at RC 52 to 58 hardness, for surface buildup on cast and manganese steel, not for structural joints.

What a 1/8 welding rod does

A 1/8 in rod is the thinner of the two, so it deposits less metal per pass and runs at lower amperage, which suits thinner stock and smaller joints where heat control matters. The four listings here are all 5/32, so the 1/8 side is explained from the diameter difference itself. The practical line is simple: when the steel is thick enough to take the heat, the 5/32 rods below do more work per pass; when the steel is thin enough to burn through, step down to 1/8. The four listed rods all sit on the 5/32 side.

The gear: four listed 5/32 rods, ranked

All four listings are 5/32 in, ranked by what each one states it can do.

1. YESWELDER E7018 5/32 in, 10 lb

The structural pick. A low-hydrogen iron powder electrode the listing pitches for high quality x-ray welds, all positions, on AC or DC reverse polarity. Diameter 5/32 in, length 14 in, 10 lb box, with a recommended amperage of 150 to 220A. The application list is the widest here: low-alloy structurals, low, medium and high carbon steels, offshore rigs, power plants, steel structures and tack welds. Steady arc, low spatter and high deposition efficiency per the listing. No warranty term is stated.

2. Forney E6011 31310 5/32 in, 10 lb

The dirty-steel pick. An E6011 all-purpose rod for deep penetration and fast freezing on dirty, rusty, painted and galvanized steel, with minimal surface preparation. All positions, dependable on AC and weldable on DC+, with smooth arc wetting and fast deposition. The spec table states up to 170A and 60,000 tensile strength, and the warranty is 90 days against manufacturer defects, a concrete stated term.

3. Blue Demon E7018 5/32 in, 5 lb tube

The small-box E7018. A low-hydrogen carbon steel electrode, 5/32 by 14 in, in a 5 lb plastic tube, AC/DC. The listing is thin: the bullets say only “great tools at a great price,” so the type and size carry the whole description. No amperage and no warranty term are stated. The pick when you want E7018 in a 5 lb tube rather than a 10 lb box.

4. Forney 42401 Supercote hardfacing 5/32 in, 1 lb

The wear pick, not the structural pick. A hardfacing rod for moderate abrasion and low impact in all positions, crack resistant with RC 52 to 58 hardness, smooth arc action and easy slag removal. Typical applications are surface buildup on new or worn machine parts of cast steel and manganese steel. A 1 lb pack, with the same 90-day warranty against manufacturer defects as the Forney E6011. Do not use it for structural joints.

What the listings tell you

Four 5/32 rods, three different jobs. The two E7018s are the low-hydrogen structural choice; the E6011 is the penetration choice for dirty steel; the hardfacing rod is the wear choice for buildup. Stated amperage runs 150 to 220A on the YESWELDER and up to 170A on the Forney E6011. The two Forney listings state a 90-day warranty; the YESWELDER and Blue Demon state none. All four listings are 5/32.

Pick by the job

Structural welds on medium to high carbon steel are the YESWELDER E7018’s job, at 150 to 220A. Rusty, painted or galvanized repair work is the Forney E6011’s job, with deep penetration and minimal prep. Small E7018 needs are the Blue Demon’s 5 lb tube. Worn machine parts needing a hard surface are the Forney hardfacing rod’s job, never a structural joint. And if the steel is thin enough to burn through, none of these is the rod: step down to 1/8.

FAQ for welders

Can I weld thin steel with 5/32 rod?

It is the wrong diameter for the job: 5/32 deposits more metal and runs hotter, so thin stock risks burn-through. Step down to 1/8 for thin steel; keep 5/32 for thicker sections.

What is the difference between E6011 and E7018?

From the listings: E6011 is the deep-penetration rod for dirty, rusty, painted and galvanized steel with minimal prep, running on AC or DC+. E7018 is the low-hydrogen rod for quality structural welds on carbon steels, all positions, on AC or DC reverse polarity. Pick E6011 for bad steel, E7018 for critical welds.

What is hardfacing rod for?

Surface buildup against abrasion, not structural welding. The Forney 42401 is rated for moderate abrasion and low impact at RC 52 to 58 hardness, for worn machine parts of cast and manganese steel. It is crack resistant but not a structural electrode.

What amperage for 5/32 welding rod?

Per the listings: 150 to 220A on the YESWELDER E7018, up to 170A on the Forney E6011. The Blue Demon and hardfacing listings state no amperage. Start in the stated range and tune to the joint.

Do these welding rods have a warranty?

The two Forney listings state a 90-day warranty against manufacturer defects. The YESWELDER and Blue Demon listings state no warranty term.

Related: best 7018 welding rod for home shop and best 7018 welding rod for vertical welding. Also see best welding electrode holder under 30.

More buying guides

Welding Consumables ·

6013 Welding Rod Specifications Explained

6013 welding rod specifications cover diameter, length, pack weight, current type, and tensile strength for mild steel rods that suit sheet metal, duct work,…

Welding Consumables ·

Best Welding Rod for Vertical Welding (2026)

Four stick electrodes for vertical welding, compared on diameter, pack weight, positions and power, from a fast-freezing E6011 to a hardfacing rod.