Welding Hose Repair Kit: What to Buy
A welding hose repair kit lets you cut out a damaged section of oxy acetylene hose and crimp on new fittings, and the right kit depends on the hose size and whether the crimper is in the box.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
58PCS Hose Repair Kit, 1/4 I.D.Torch Hose Repair9.7/10View on Amazon - 2
54PCS PK-26 1/4" I.D.Torch Hose Repair Kit9.7/10View on Amazon - 3
Forney 60326 Hose Repair Kit, Oxygen Acetylene9.6/10View on Amazon - 4
2PCS Welding Hose Coupler Adapter Set Torch Hose9.5/10View on Amazon
A cut hose ends the job until it is fixed, and a welding hose repair kit is the box that gets the torch back to work: cut out the damaged section, fit new ends, and crimp them tight, or thread on couplers to join two lengths. For the common oxy acetylene hose sizes, a crimper kit with B-size fittings covers the repair, while a fittings-only set works when you already own a crimper.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

58PCS Hose Repair Kit, 1/4 I.D.Torch Hose Repair
A 58-piece kit with a crimper for crimping new fittings onto a hose after cutting out the damaged section.
Pros
- 58 pieces: fittings, ferrules, couplers, braces, splicers, nipples, nuts
- Crimper included with a cast iron handle and heat-treated dies
- Fits 1/4-inch and 3/16-inch inside diameter hose
- Portable plastic casing with a full-color label and charts
Cons
- 58 pieces is more kit than a single hose repair needs
- Match the hose size before purchase, since the kit fits 1/4-inch and 3/16-inch hose only
- Plastic casing, not a metal case
- Crimper handles 1/4-inch and 3/16-inch hose only, not larger sizes

54PCS PK-26 1/4" I.D.Torch Hose Repair Kit
A 54-piece PK-26 kit with a crimper for the same crimp repair.
Pros
- 54 pieces: fittings, ferrules, couplers, braces, splicers, nipples, nuts
- Crimper included with a cast iron handle and heat-treated dies
- Fits 1/4-inch and 3/16-inch inside diameter hose
- Portable plastic casing with a full-color label and charts
Cons
- Four fewer pieces than the 58-piece ZGTools kit
- Match the hose size before purchase, since the kit fits 1/4-inch and 3/16-inch hose only
- Plastic casing, not a metal case
- Crimper handles 1/4-inch and 3/16-inch hose only, not larger sizes

Forney 60326 Hose Repair Kit, Oxygen Acetylene
A brass fittings set for a 1/4-inch hose: new nipples, ferrules and nuts, crimper not included.
Pros
- Brass nipples, ferrules and 9/16-inch-18 nuts for oxygen and acetylene
- Repairs a 1/4-inch hose in the field
- B fittings match common USA torch inlet and regulator outlet connections
- Rated for low pressure gas service under 200 PSIG
Cons
- Ferrule crimper not included
- Fittings only: no hose, no crimper, no casing
- 90-day warranty, shorter than the 1-year terms here
- Two nipples and two ferrules cover one repair, not several

2PCS Welding Hose Coupler Adapter Set Torch Hose
A pair of left-hand and right-hand couplers that join or extend twin hose.
Pros
- Brass left-hand and right-hand adapters for twin hose
- Fits 9/16-inch-18 UNF threads on most twin welding hoses
- Extends a twin hose without cutting and crimping
- Two adapters cover both sides of the twin hose
Cons
- Couplers only: no ferrules, nipples or crimper
- No warranty term is stated
- Two pieces cover one twin-hose joint
- Fits 1/4-inch and 3/16-inch twin hose only
What the repair takes
A crimped hose repair has three moves: cut out the damaged section, fit a barbed nipple and ferrule on each end, and crimp the ferrule tight. The crimper kits here fit 1/4-inch and 3/16-inch inside diameter hose and are B-size kits. The Forney set has 9/16-inch-18 nuts for oxygen and acetylene, and the Mozeat couplers use 9/16-inch-18 UNF threads. The Forney set is rated for low pressure gas service under 200 PSIG. Check the hose size before ordering.
Side by side
| Hose Repair Kit | Gear Score | Hose Size | Kit Contents | Crimper | Warranty |
|---|---|---|---|---|---|
| ZGTools 58-Piece Kit | 9.7/10 | 1/4 and 3/16 in I.D. | 58 pieces | Included | 1 Year Manufacturer |
| Pidnsrozo 54-Piece PK-26 | 9.7/10 | 1/4 and 3/16 in I.D. | 54 pieces | Included | 1 Year Manufacturer |
| Forney 60326 | 9.6/10 | 1/4 in | 2 nipples, 2 ferrules, 2 nuts | Not included | 90 day warranty |
| Mozeat Lens Coupler Set | 9.5/10 | 1/4 and 3/16 in twin | 2 coupler adapters | Not included | Not stated |
The two crimper kits cover the cut-and-crimp repair in one box. The Forney set covers the fittings half, and the Mozeat set covers joining and extending twin hose.
Welding hose repair kit gear
The crimper does the joining work, so the kit you need depends on whether the crimper is in the box.
Before you order
Match the kit to the hose size first: the crimper kits and the couplers cover 1/4-inch and 3/16-inch hose, while the Forney set covers 1/4-inch hose only. A twin hose needs left-hand and right-hand threads, which the Mozeat set provides as a pair. If the hose is cut near the torch or regulator, a coupler can extend it.
Gas hose safety. Work with the cylinders closed and the torch off while you cut and fit hose, and keep the repair away from flame until the joints are checked. Keep gas cylinders upright with a chain. See the OSHA welding overview.
FAQ for welders
What size hose does a repair kit fit?
The crimper kits and the couplers fit 1/4-inch and 3/16-inch inside diameter hose, while the Forney set fits 1/4-inch hose only. The crimper kits are B-size, the Forney nuts are 9/16-inch-18 for oxygen and acetylene, and each crimper kit says to make sure the size matches before purchase.
Do I need a crimper to repair a welding hose?
Yes, for a crimped repair. The ZGTools and Pidnsrozo kits include a crimper, while the Forney set states that a ferrule crimper is not included. The Mozeat couplers thread on, so they need no crimper at all.
Can I repair an oxygen acetylene hose in the field?
The Forney set is made for field repair of a 1/4-inch hose: cut out the damage, fit the new nipples and ferrules, and crimp them with a ferrule crimper. Check the joints before striking an arc.
Can I extend a twin hose instead of replacing it?
Yes. The Mozeat set is a pair of brass coupler adapters, one left hand and one right hand, for 1/4-inch and 3/16-inch twin hose with 9/16-inch-18 UNF threads. Thread them on to join two lengths or to extend a double welding hose.
Related: best flux core welder, best welder for beginners, oxy acetylene torch setup, and the welding consumables hub.




