Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Stainless vs Mild Steel MIG Wire: Which One Should You Buy?

Stainless wire for stainless steel, mild steel wire for mild steel: a guide to the difference, with three self-shielded stainless flux core wires and one solid ER308L ranked from their listings.

Stainless vs Mild Steel MIG Wire: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 11-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32"x36"1-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32"x36"9.7/10View on Amazon
  2. 2ARCCAPTAIN MIG Welding Wire ER70S-6 .030" 10LB x 1 SmoothARCCAPTAIN MIG Welding Wire ER70S-6 .030" 10LB x 1 Smooth9.6/10View on Amazon
  3. 3YESWELDER Gasless Flux Core MIG WireYESWELDER Gasless Flux Core MIG Wire9.6/10View on Amazon
  4. 4ARCCAPTAIN Stainless Steel Flux Cored Wire E308LFC-OARCCAPTAIN Stainless Steel Flux Cored Wire E308LFC-OView on Amazon
  5. 5YESWELDER Stainless Steel MIG Solid WireYESWELDER Stainless Steel MIG Solid WireView on Amazon
  6. 6ARCCAPTAIN ER308L Stainless Steel MIG Wire .035" 2LB GaslessARCCAPTAIN ER308L Stainless Steel MIG Wire .035" 2LB GaslessView on Amazon
  7. 7PGN ER308L .035" Stainless Steel MIG Welding WirePGN ER308L .035" Stainless Steel MIG Welding WireView on Amazon
  8. 8PGN ER308L Stainless Steel .030" MIG Welding Wire 2 lb LowPGN ER308L Stainless Steel .030" MIG Welding Wire 2 lb LowView on Amazon
  9. 9ER308L .030" Stainless Steel MIG Welding Wire 10 lb SpoolER308L .030" Stainless Steel MIG Welding Wire 10 lb SpoolView on Amazon

Stainless vs mild steel MIG wire comes down to the base metal: stainless wire for stainless steel, mild steel wire for mild steel. The listings frame it as a matching question: each stainless wire here names the stainless grades it covers, so the wire follows the base metal. All four listings featured here are stainless steel wires, three self-shielded flux core and one solid, so this guide walks through what those listings state and where mild steel wire fits.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Stainless vs mild steel MIG wire: the difference in one paragraph

Mild steel wire welds mild steel. Stainless wire welds stainless steel. The stainless listings here name the grades they cover, 304, 304L, 308, 308L, 321 and 347 on the YESWELDER and ARCCAPTAIN flux core wires, and the weld metal they deposit is made to match the base metal’s corrosion resistance. Stainless wire is also pickier about gas: the solid ER308L listing states it works with 100 percent argon or argon and helium blends, while the three flux core listings are self-shielded and state they need no gas at all.

Side by side

Wire Type Gas needed Diameter Spool Grades stated
YESWELDER E308LFC-O Flux cored, self-shielded No .035 in 2 lb 304, 304L, 308, 308L, 321, 347
ARCCAPTAIN E308LFC-O Flux cored, self-shielded No .035 in 2 lb 304, 304L, 308, 308L, 321, 347
YESWELDER ER308L Solid Argon or argon-helium .030 in 10 lb 304, 304L, 308, 308L, 321, 347
Blue Demon E309LFC-O Flux cored, self-shielded No .035 in 1 lb Not stated

What the listings show is the stainless range: self-shielded flux core for no-gas outdoor work, and solid wire for gas MIG with argon blends.

Self-shielded flux core: the three listings

Three of the four listings are E308LFC-O or E309LFC-O self-shielded flux core wires, and all three state they need no shielding gas. The YESWELDER E308LFC-O is a 2-pound spool at .035 inch with a stated tensile strength of 570 megapascals, all-position welding, and an ABS plastic spool. The ARCCAPTAIN E308LFC-O is also a 2-pound .035-inch spool, vacuum packed per the listing for moisture protection, and names the same 304 through 347 grade range. The Blue Demon E309LFC-O is a 1-pound .035-inch spool; Its listing states full and horizontal positions with DCEP polarity. For outdoor stainless repair with no cylinder, the self-shielded listings are the stated answer. See our best flux core wire under 30 roundup for more spools.

Solid stainless wire: the ER308L listing

The YESWELDER ER308L is the only solid wire here: .030 inch on a 10-pound ABS spool. Its listing states it works with 100 percent argon or argon and helium blends, with deeper penetration and higher travel speeds on those gases, minimal spatter, and suitability for all positions. It names the same 304 through 347 stainless grades. Solid wire with gas gives the minimal-spatter bead the ER308L listing states, at the cost of the cylinder, regulator and hose. Our best shielding gas for MIG welding guide covers the gas side.

Where mild steel wire fits

The rule the listings support by example is match the wire to the base metal: the stainless listings name stainless grades, and a mild steel job wants a mild steel wire. If you weld mild steel, shop a mild steel wire roundup for that work instead.

Diameter and spool size, as stated

Three listings state .035 inch wire and one states .030 inch. Note the contradictions: the YESWELDER E308LFC-O bullets say .035 inch while its spec table says 0.04 inches, and the Blue Demon table lists an item weight of 0.27 grams against a 1-pound spool in the title. Trusting the titles and bullets over the tables, the diameters are .035, .035, .035 and .030, and the spools are 2, 1, 2 and 10 pounds. The 10-pound ER308L spool is the shop-size pick; the 2-pound flux core spools suit occasional stainless repair. Our best MIG wire for beginners guide covers wire choice.

The four wires, ranked

1. YESWELDER E308LFC-O, 2 lb. The most complete listing: .035 inch, stated 570 megapascal tensile strength, all positions, 304 through 347 grades, self-shielded, on an ABS spool. The diameter contradiction with its own table is the only blemish.

2. ARCCAPTAIN E308LFC-O, 2 lb. Nearly the same wire on paper: .035 inch, all positions, 304 through 347 grades, self-shielded, vacuum packed for moisture protection. It states less than the YESWELDER, no tensile figure, so it ranks second.

3. YESWELDER ER308L, 10 lb. The only solid wire and the only gas MIG option: .030 inch for 100 percent argon or argon-helium blends, 10-pound spool, 304 through 347 grades. It is the pick when you have the gas and want the cleaner bead.

4. Blue Demon E309LFC-O, 1 lb. The dissimilar-metal option in the AWS system, .035 inch, DCEP, full and horizontal positions. The listing is the thinnest here and its table states an absurd 0.27-gram weight against the 1-pound title, so verify before buying.

FAQ for welders

Can I weld stainless steel with mild steel wire?

The listings here name stainless grades for stainless work and recommend nothing else. Use a stainless wire like the ones above for stainless steel.

Do I need gas for stainless MIG wire?

It depends on the wire. The three flux core listings here are self-shielded and state no gas is needed. The solid ER308L listing states it needs 100 percent argon or an argon and helium blend.

What is the difference between E308LFC-O and ER308L?

E308LFC-O is a self-shielded flux core stainless wire: no gas, all positions per the listings. ER308L is a solid stainless wire for gas MIG: minimal spatter per its listing, but it needs the cylinder and regulator.

Which wire for 304 stainless?

The YESWELDER E308LFC-O, ARCCAPTAIN E308LFC-O and YESWELDER ER308L listings all name 304 and 304L among their stated grades. The Blue Demon E309LFC-O is the E309 option here: .035 inch, DCEP, full and horizontal positions per its listing.

Can I use stainless flux core outdoors?

The YESWELDER E308LFC-O listing states its self-shielding design suits outdoor windy conditions with no external gas. That is the stated advantage of flux core over gas MIG outside.

Related: best flux core wire under 30, argon vs helium for MIG welding, C25 vs CO2 gas for MIG welding, and our MIG vs TIG for stainless steel comparison.

More buying guides