Safety Glass Replacement Lenses Guide
Safety glass replacement swaps a scratched, fogged or cracked lens for a new lens in the same frame, matched by part number, tint, coating and standard.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Forney 57005 Lens Replacement Hardened GlassView on Amazon - 2
Forney 57009 Lens Replacement Hardened GlassView on Amazon
A scratched lens turns a clear view into a haze of glare and dust, and a cracked lens leaves the eye open to chips from grinding and welding. Safety glass replacement means fitting a new lens into the same frame instead of buying new glasses, and it works when the frame still holds its shape and the lens seat stays clean and true. This guide walks through the signs that call for a swap, the lens types that match common shop frames, and the fit checks that keep the new lens seated and clear.
Other welders and gear to compare
Forney 57005 Lens Replacement Hardened GlassCheck price on Amazon
Forney 57009 Lens Replacement Hardened GlassCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
What safety glass replacement covers
Safety glass replacement covers the lens alone: the clear or tinted piece that sits in the frame and the coating on that piece. A swap makes sense when the view turns hazy, when scratches catch light, or when a chip or crack breaks the surface.
Listings in this guide show clear lenses, smoke gray lenses, and a bifocal lens with +1.5 magnification, so the choice starts with tint and magnification, then moves to fit and standards. Clear lenses suit indoor shop work and low light, while smoke gray lenses suit bright outdoor work and glare. The +1.5 figure comes from the Coast listing for the SGL400 model.
Side by side
| Clear lens | Smoke gray lens | Bifocal lens | |
|---|---|---|---|
| Tint | Clear | Smoke gray | Clear |
| VLT | Not stated | Not stated | Not stated |
| Anti-fog coating | Listed | Not stated | Listed |
| UV protection | Listed for ESS clear | Not stated | Listed for Coast |
| Standards listed | ANSI Z87.1-2010 | Not stated | Not stated |
| Warranty stated | 5 Years | 5 Years | 1 year |
| Magnification | Not stated | Not stated | +1.5 |
| Fit note | Frames that take ESS 740-0425 | Frames that take ESS 740-0424 | Frames that take Coast SGL400 |
The table shows the trade in plain terms: clear lenses keep the view bright, smoke gray lenses cut glare, and a bifocal lens adds magnification for close work. Tint alone does not prove impact protection, so the standards line matters as much as the tint line. A lens that lists ANSI Z87.1-2010 or ANSI Z87.1+ (2020) carries a stated standard for eye protection. For frame and lens care, see the safety glass storage guide and the safety glass standard guide.
When to swap a clear lens
Swap a clear lens when scratches scatter light, when fog stays on the surface, or when the coating wears in patches that blur the view. ESS lists a clear replacement lens with an anti-fog coating and a 5 Years warranty, under part number 740-0425, and 3M lists a clear replacement lens for the GoggleGear 500 Series with a Scotchgard anti-fog coating that resists fogging for up to 25 washings with water. 3M lists this lens for industrial and occupational use only. Uvex lists a clear replacement lens for Genesis safety eyewear under part number S6900HS, with a Hydro Shield anti-fog coating in the title. Clear lenses for shop use appear in the best safety glasses roundup and the best anti-fog safety glasses roundup.
When to swap a smoke gray lens
Swap a smoke gray lens when the tint turns uneven, when scratches catch sun glare, or when the coating wears thin at the edges. ESS lists a smoke gray replacement lens under part number 740-0424 with a 5 Years warranty, and a smoke gray lens for CDI frames under part number 740-0320 with VLT at 11 percent and a 5 Years warranty. Klein lists a gray replacement lens under part number 60482 for safety goggles Cat. Nos. 60479 and 60480, with an anti-fog coating and UV protection under ANSI Z87.1 U6 that blocks 99.9 percent of harmful UV-A, UV-B, and UV-C rays, according to the maker listing. Klein also lists ANSI Z87.1+ (2020), CSA Z94.3-20, and MIL-PRF-32432A for the same lens family, and a clear lens under part number 60481 for the same goggle frames.
How to match a lens to the frame
Match the lens to the frame by model, not by looks. ESS clear and smoke gray lenses carry part numbers 740-0425 and 740-0424, and the CDI smoke gray lens carries part number 740-0320, so the part number on the old lens or the frame tells the buyer which lens fits. Klein gray lenses fit goggles Cat. Nos. 60479 and 60480, with a clear lens under Cat. No. 60481 for the same frames. 3M clear lenses fit the GoggleGear 500 Series, Uvex clear lenses (on Amazon) fit Genesis safety eyewear under part number S6900HS, and Coast bifocal lenses (on Amazon) fit the SGL400 model with +1.5 magnification.
Standards give the buyer a stated line to check. ESS clear lenses list ANSI Z87.1-2010, Klein gray lenses list UV protection under ANSI Z87.1 U6 and list ANSI Z87.1+ (2020) and CSA Z94.3-20, and ESS CDI smoke gray lenses list MIL-PRF-32432, while Klein gray lenses list MIL-PRF-32432A. Coast lists a 1 year warranty against defects in materials and workmanship on bifocal lenses. For the standard behind the label, see the safety glass standard guide and the welding safety gear hub.
How to fit a new lens
Fit the new lens with clean hands and a clean bench, and keep the old lens beside the new lens for a shape check through the job.
- Clean the frame. Brush grit from the lens seat and wipe the frame with a soft cloth, so grit stays out of the seal.
- Check the shape. Hold the new lens against the frame seat and look for a gap at the edge or at the nose.
- Seat the edge. Press the lens into the seat with even pressure around the rim, and look for a flush edge all round the frame.
- Check the fit on the face. Put the glasses on and check that the frame sits level and the view stays clear at the edges.
- Store the spare. Keep the spare lens in a case or pouch away from dust and grit. See the safety glass storage guide for case and pouch care.
Some anti-fog coatings need care in cleaning, since harsh wipes can wear the coating and leave fog on the surface. The 3M coating is listed as an exception: it withstands disinfection with diluted bleach soaking or alcohol wipes, and resists fogging for up to 25 washings with water, according to the maker listing. Swap the lens when fog stays after cleaning.
FAQ for welders
When should a safety lens be replaced?
Replace the lens when scratches blur the view, when a crack breaks the surface, or when the coating peels and fog stays after cleaning. A lens with a warped shape or a cracked edge also needs a swap, since the seal at the frame seat can fail.
How do I know which replacement lens fits my glasses?
Use the part number on the old lens or the frame, and match the model number on the listing before ordering. ESS clear lenses carry part number 740-0425, ESS smoke gray lenses carry part number 740-0424, and Klein gray lenses fit goggles 60479 and 60480.
Are clear and smoke gray lenses interchangeable?
No, not by tint alone. A clear lens and a smoke gray lens fit the same frame only when they share the same model and part number, so check the part number and frame fit before ordering. Clear lenses suit indoor shop work and low light, while smoke gray lenses suit bright outdoor work and glare.
What does ANSI Z87.1 mean on a replacement lens?
ANSI Z87.1 is a stated standard for eye protection that appears on listings for ESS clear lenses and Klein gray lenses. The buyer should check the exact standard on the lens listing before ordering.
Can a bifocal replacement lens help with close work?
Coast lists a bifocal replacement lens with +1.5 magnification for the SGL400 model, with an anti-fog coating and a 1 year warranty against defects in materials and workmanship. The lens suits readers who need magnification for close work, and the buyer should check the magnification and the frame fit before ordering.
Related: safety goggles for welding, glass lens safety glasses, safety glasses for dust, and the welding safety gear hub. Also see the plasma cutter safety glasses guide.




