Safety Glass Standard: What to Look For in the Shop
The safety glass standard sets the bar for impact, coverage and markings: what ANSI Z87.1 means, how to read the mark, and which rated glasses suit shop work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Salfboy 30pack Safety Glasses Bulk for Men Women9.6/10View on Amazon - 2
Crossfire 211125 Brown Safety Glasses9.6/10View on Amazon - 3
MCR Safety SR22BG Swagger (Sr2) Glasses9.6/10View on Amazon - 4
Salfboy Clear Safety Glasses Bulk Ansi Z87.19.6/10View on Amazon
A grinder throws sparks and grit across the bench, and a cutoff wheel can send a shard further than you expect. The glasses you grab before the cut decide whether your eyes are covered or just shaded. This guide explains the safety glass standard: what the markings mean, which rating covers shop work, and how to pick a pair that fits under a helmet and stays on through a shift.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Salfboy 30pack Safety Glasses Bulk for Men Women
A 30-pack of clear ANSI Z87.1 glasses with a wraparound lens, stated dimensions, and a 1 year manufacturer warranty.
Pros
- ANSI Z87.1 rated lenses with scratch and impact resistance stated
- Wraparound lens gives direct and peripheral visibility
- Stated frame width of 5.91 inch and lens length of 2.95 inch
- 30-pack covers a crew or a household at one buy
Cons
- Colour field lists 15 clear and 15 grey, while the title says clear
- No side shields stated in the listing
- One size only, with no narrower fit stated
- No UV figure stated beyond the ANSI Z87.1 mark

Crossfire 211125 Brown Safety Glasses
A frameless brown-mirror pair with an adjustable nosepiece, an 8 to 10 base curve, and lenses rated past ANSI Z87.1-2003 high impact standards.
Pros
- Lens quality meets and exceeds ANSI Z87.1-2003 high impact standards
- 99.9% protection from harmful UVA and UVB rays stated
- Adjustable nosepiece and ultralight frame
- 8 to 10 base curve for side coverage and peripheral vision
Cons
- No warranty stated in the listing
- No side shields stated
- Frame material named only as durable and flexible, not by type
- Brown mirror lens only; no clear option stated

MCR Safety SR22BG Swagger (Sr2) Glasses
A full-frame pair with a green mirror lens, detachable side shields, soft nose pads and a Duramass scratch resistant coating, rated to ANSI/ISEA Z87.1 2020 with the shields fitted.
Pros
- Rated to ANSI/ISEA Z87.1 2020 with side shields fitted
- Duramass scratch resistant coating on polycarbonate lenses
- Filters 99.9% of harmful UV rays
- Detachable side shields and soft nose pads
Cons
- If the side shields are removed, the frame does not pass ANSI/ISEA Z87.1 2020
- No concrete warranty term; the listing gives Amazon Return Policies only
- Green mirror lens only; no clear option stated
- No lens dimensions stated in the listing

Salfboy Clear Safety Glasses Bulk Ansi Z87.1
A 100-pack of clear polycarbonate glasses rated to ANSI Z87.1, with stated frame dimensions, yellow silicone temple sleeves and a grey lens option with UV protection.
Pros
- ANSI Z87.1 rated, with scratch and impact resistance stated
- 100-pack covers a full crew or a long run of spares
- Stated inner width of 5.3 inches and frame width of 5.6 inches
- Temples wrapped with yellow silicone sleeves for comfort
Cons
- Warranty field reads No, so no warranty is stated
- No side shields stated in the listing
- Dimensions are measured manually per the listing, so allow for error
- Grey lens UV protection is stated, but no UV figure is given for the clear lens
What the Safety Glass Standard Covers
The safety glass standard most listings point to is ANSI Z87.1. When a listing carries that mark, the maker is claiming the pair meets the standard for impact resistance and coverage that shops and sites ask for. The OSHA safety glass standard points to the same mark for eye protection on the job, so a pair without it makes no rated claim, whatever the tint looks like.
The mark comes in revisions. One listing here cites ANSI/ISEA Z87.1 2020, another cites ANSI Z87.1-2003 high impact standards, and others cite ANSI Z87.1 without a year. The year tells you which revision the maker claims; the mark itself is the maker’s claim that the pair was built to a rated standard rather than a fashion one. Check the marking on the lens or the frame before you buy, and match it to the work: grinding, cutting and chipping all throw debris at the eyes, and a rated pair is the cover for that work.
Side by side
| Salfboy 30-Pack | Crossfire 211125 | MCR Safety SR22BG | Salfboy 100-Pack | |
|---|---|---|---|---|
| Standard | ANSI Z87.1 | ANSI Z87.1-2003 high impact | ANSI/ISEA Z87.1 2020 | ANSI Z87.1 |
| Lens | Clear, polycarbonate | Brown mirror | Green mirror, polycarbonate | Clear or grey, polycarbonate |
| Pack size | 30 | 1 | 1 | 100 |
| Side shields | Not stated | Not stated | Detachable | Not stated |
| Warranty | 1 Year Manufacturer | Not stated | Not stated | Not stated |
The table above lines up the 4 pairs on the points that matter: the standard each claims, the lens, the pack size, side shields and warranty. The bulk packs suit a crew or a spares box, while the single pairs suit a welder who wants one pair that fits and stays on.
How to Read the Markings
Start with the mark. A lens or frame stamped Z87.1 claims the rated standard; a pair with no mark stated claims nothing, whatever the listing calls it. Next, look for side shields. The MCR pair here passes ANSI/ISEA Z87.1 2020 with its detachable shields fitted, and the listing warns the frame does not pass with them removed, so the rating and the shields go together. The other pairs state no side shields. The Crossfire claims side coverage from its 8 to 10 base curve, and the Salfboy 30-pack claims peripheral visibility from its wraparound lens, while the 100-pack states no side cover.
- Mark. Z87.1 on the lens or frame, with the revision year when the listing states it.
- Side shields. Fitted and stated, or not stated at all.
- Lens. Clear for indoor work, mirror or grey where glare is the problem.
- Fit. Frame width and leg or temple length from the listing, so the pair sits flat under a helmet.
Fit matters as much as the mark. The Salfboy listings state frame widths of 5.91 inch and 5.6 inches, with a leg length of 5.91 inch on the 30-pack and temples of 4.3 inches on the 100-pack, so you can compare the fit on paper before you buy. A pair that slides down or pinches at the temples ends up on the bench, and a pair on the bench covers nothing. For more on the choice between cover types, see the welding goggles vs safety glasses guide.
The Gear That Meets the Safety Glass Standard
Each pair below claims an ANSI Z87.1 rating in its listing, and each handles a different part of the job: bulk spares for the crew, a light frameless pair for grinding, a shielded pair for outdoor work, and a deep spares box for the shop.
For more options, see our welding safety gear guides.
FAQ for welders
What does ANSI Z87.1 mean on safety glasses?
It means the maker claims the pair meets the ANSI Z87.1 standard for eye protection, covering impact resistance and the coverage the standard asks for. Look for the Z87.1 mark on the lens or frame, and check whether the listing names a revision, such as Z87.1 2020 or Z87.1-2003. A pair with no mark stated makes no rated claim.
What is the OSHA safety glass standard?
OSHA calls for eye protection that meets ANSI Z87.1 where flying particles, sparks or debris threaten the eyes, which covers most grinding, cutting and chipping in the shop. The listings here all cite ANSI Z87.1 in one revision or another, so each pair makes a rated claim for that work. Check the marking on the pair you buy, and wear the glasses for the whole job, not just the loud part.
Do safety glasses need side shields?
Side shields close the gap at the edges, where grit and sparks slip past a plain lens. The MCR pair here is rated to ANSI/ISEA Z87.1 2020 with its detachable shields fitted, and the listing warns the frame does not pass with them removed. The other pairs state no side shields, though the Crossfire claims side coverage from its 8 to 10 base curve and the Salfboy 30-pack claims peripheral visibility from its wraparound lens; only the MCR pair states detachable side shields, so if stated shields matter for your work, pick a pair that states them.
What is the difference between Z87.1 2020 and Z87.1-2003?
The year is the revision of the standard the maker claims. The MCR pair cites ANSI/ISEA Z87.1 2020, the Crossfire pair cites ANSI Z87.1-2003 high impact standards, and the Salfboy pairs cite ANSI Z87.1 with no year stated. Either revision is a rated claim against that edition; what matters is that the listing states a revision you can check, and that the pair fits and stays on.
Can I wear safety glasses under a welding helmet?
Safety glasses sit under a helmet for grinding and chipping, where the helmet is up and the glasses are the cover. Pick a pair with slim temples and a frame width that suits your face: the listings here state frame widths of 5.91 inch and 5.6 inches. If the temples press or the frame rides up under the helmet, the fit is wrong for that pair.
Related: welding goggles vs safety glasses, best safety glasses with side shields, and shade 5 vs shade 8 welding goggles.




