Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Goggles vs Safety Glasses: Which One Should You Buy?

Welding goggles seal against the face while safety glasses sit open; with two shade 5 ANSI Z87.1 safety-glasses examples compared on lens, fit, rating and weight.

Welding Goggles vs Safety Glasses: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Hobart 770726 Shade 5, Mirrored Lens SafetyHobart 770726 Shade 5, Mirrored Lens Safety9.6/10View on Amazon
  2. 2LANON Welding Safety Glasses, ANSI Z87.1LANON Welding Safety Glasses, ANSI Z87.19.5/10View on Amazon

Verdict. Pick safety glasses like the two examples here for grinding and general shop work where airflow and a light fit matter. Pick welding goggles when the job needs a sealed fit against dust and fine sparks. One honest note: both examples in this guide are safety glasses, so the goggle side is described from the category itself, not from a listing.

The welding goggles vs safety glasses question comes up every time someone gears up for grinding. Both shield your eyes, but they do it differently: goggles seal against your face, while glasses sit open with air moving around the lenses. The two examples below are both safety glasses, each with a shade 5 lens and a stated ANSI Z87.1 rating, and they show what the glasses side offers while the goggle side is described from the category.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The two examples

Hobart 770726 Shade 5, Mirrored Lens Safety

Hobart 770726 Shade 5, Mirrored Lens Safety

Hobart9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Shade 5 mirrored-lens safety glasses with a polycarbonate lens the listing describes as shatterproof, scratch-resistant coating and a stated ANSI Z87.1 rating, at 2.24 oz.

Pros

  • Mirrored shade 5 polycarbonate lens
  • Shatterproof lens with scratch-resistant coating, per the listing
  • Meets ANSI Z87.1, stated in the title and bullets
  • UV protection stated; 2.24 oz listed weight

Cons

  • No warranty term stated
  • Regular fit only; no wraparound stated
  • No anti-fog coating stated
  • Single pair; no case or strap listed
LANON Welding Safety Glasses, ANSI Z87.1

LANON Welding Safety Glasses, ANSI Z87.1

LANON Protection9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Wraparound welding safety glasses with an IR filter shade 5.0 lens, anti-fog coating and a stated ANSI Z87.1 rating, at 34.02 g.

Pros

  • IR filter shade 5.0 lens, dark green
  • ANSI Z87.1 stated in the title
  • Anti-fog coating and wraparound fit
  • Adjustable temples; UV protection stated

Cons

  • No warranty term stated; listing points to a warranty page
  • Bullets are empty; all detail comes from the title and table
  • No case, strap or storage pouch listed
  • Weight in grams while the other example uses ounces

Other welders and gear to compare

Side by side

Product Gear Score Side Lens Safety rating Fit Coating Weight
Hobart 770726 Shade 5 9.6/10 Safety glasses Mirrored shade 5 polycarbonate ANSI Z87.1 Full rim, regular Scratch resistant 2.24 oz
LANON Shade 5.0 Glasses 9.5/10 Safety glasses IR filter shade 5.0, dark green ANSI Z87.1 (title) Wraparound, universal Anti-fog 34.02 g

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 October 2026. Both examples state ANSI Z87.1; neither states a warranty term.

Welding goggles vs safety glasses: what actually differs

The difference is the seal. Welding goggles cup the eye sockets and seal against the face, which keeps fine dust, grinding sparks and wind-blown grit out from every angle. Safety glasses sit on the nose and ears like ordinary glasses, with open gaps at the sides, top and bottom. That openness is also their advantage: more airflow, less fogging, lighter on the face, and easy on-and-off all day. Neither style is better in the abstract; the right one depends on what is flying toward your eyes.

Shade and lens

Both examples here are shade 5: the Hobart 770726 has a mirrored shade 5 polycarbonate lens, and the LANON has an IR filter shade 5.0 lens in dark green. Shade 5 is darker than clear safety glasses but far lighter than an arc-welding shade. The listings do not state a shade for any goggle, because no goggle is listed here, so this guide cannot compare goggle shades against these two.

Fit and coverage

The Hobart example is a full-rim frame in a regular fit; the LANON is a wraparound in a universal fit with adjustable temples. Wraparound coverage closes some of the side gaps that a flat-lens glass leaves open, which is the closest the glasses side gets to a goggle’s seal. A true goggle goes further with a full perimeter seal and usually a strap instead of temples. Fit is personal: the best-rated lens does nothing if the eyewear slides down your nose.

Safety ratings and coatings

Both listings state ANSI Z87.1, the eye-protection standard, so neither side wins on paper here. The Hobart adds a stated shatterproof lens, scratch-resistant coating and UV protection. The LANON adds an anti-fog coating, stated UV protection, and anti-scratch and anti-impact in its title highlight. Coatings are maintenance features as much as safety ones: a scratched or fogged lens gets taken off, and eyewear that is off protects no one.

Weight

The Hobart example lists 2.24 ounces; the LANON example lists 34.02 grams. The listings use different units, so this guide will not declare a winner on weight. Both are light eyewear, and neither listing suggests heft is a concern.

Choose welding goggles if

  • Your work throws fine dust or sparks that drift in behind open glasses.
  • You want a sealed fit around the eyes rather than airflow.
  • You work overhead, where debris falls down into open glasses.
  • You wear prescription glasses and need the room a goggle body gives.

Choose safety glasses if

  • You want airflow and a light fit for grinding and general shop work.
  • You take eye protection on and off many times a day.
  • You want a regular-fit full-rim frame, as on the Hobart example.
  • Anti-fog coating matters to you, as on the LANON example.

What the spec tables state about fit

The fit details live in the spec tables. The Hobart states a full-rim frame in a regular fit with adjustable features, a thermoplastic polyurethane frame and ABS construction. The LANON states a full-rim frame with a wraparound shape, a universal fit, adjustable temples with nylon temple tips, and a polyamide frame. Both state a lightweight weight class and positive fit-to-size sentiment. If you wear the eyewear all day, the universal fit and adjustable temples on the LANON give more ways to dial it in; the Hobart keeps it simpler with a regular fit.

Lens details from the listings

The Hobart states a mirrored shade 5 polycarbonate lens that is shatterproof with a scratch-resistant coating, UV protection, and 5 percent visible light transmission. The LANON states a 5.0 IR filter lens in dark green with an anti-fog coating and UV protection, and its title highlight adds anti-scratch and anti-impact. The Hobart listing states cleaning with a suitable solution and proper storage; the LANON states washing with mild detergent and air drying, stored in a cool and dry place. Lens care is not a footnote: a scratched lens is a removed lens.

What neither listing covers

No welding goggle is listed here, so nothing in this guide can compare goggle shades, goggle ventilation or goggle strap fit against these two examples. Neither listing states a warranty term either: the LANON points to a warranty page with no term given, and the Hobart states nothing at all. Treat both gaps as buying homework: if you need a goggle, shop goggles against their own listings, and if warranty matters, ask the seller before ordering.

FAQ for welders

Can I use shade 5 glasses for arc welding?

No. Shade 5 is far lighter than an arc-welding shade. Wear a proper welding helmet for arc welding, and keep safety glasses on underneath it.

What is the difference between welding goggles and safety glasses?

Goggles seal against the face; safety glasses sit open with airflow around the lenses. Both examples in this guide are safety glasses.

What does ANSI Z87.1 mean?

It is the eye-protection standard both listings state. A stated rating is worth more than an unstated one, which is why both examples earn safety points.

Which example is lighter?

The Hobart example lists 2.24 ounces and the LANON example lists 34.02 grams. The listings use different units, so compare them on your own scale.

Do either of these state a warranty?

Neither states a warranty term. The LANON listing points to a warranty page with no term given, and the Hobart listing states nothing at all.

Related: the best welding goggles for grinding, the best safety glasses for welding, the welding helmet vs safety glasses and the best auto-darkening welding helmet guides.

Scoring, line by line

Both examples are scored on performance, build, value, safety and warranty, using only what each listing publishes. The ANSI Z87.1 rating earns safety points for both; neither listing states a warranty term, so warranty scores are zero.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Hobart 770726 Shade 5 9.6 28 21 20 8 0
LANON Shade 5.0 Glasses 9.5 27 20 19 8 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

Before you strike an arc. Match the shade to the process, and wear a proper welding helmet for arc welding with safety glasses underneath. Wear gloves and flame-resistant clothing, ventilate the area, and keep flammables clear.

More buying guides

Welding Safety Gear ·

Best Safety Glasses for Welding (2026)

Five safety glasses for welding compared by standard, lens and fit: IR 5.0 welding picks, ANSI Z87.1 clear lenses and a 12-pair bulk pack.

Welding Tables and Carts ·

Welding Helmet vs Safety Glasses (2026)

Welding helmet vs safety glasses: two Miller helmets against two NoCry ANSI glasses, compared by arc protection, lens and warranty.