Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Safety Glasses for Welding (2026)

Five safety glasses for welding compared by standard, lens and fit: IR 5.0 welding picks, ANSI Z87.1 clear lenses and a 12-pair bulk pack.

Best Safety Glasses for Welding (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LANON Les06Best Welding PickLANON Les069.6/10View on Amazon
  2. 2Ergodyne Skullerz SIXTENMost CertifiedErgodyne Skullerz SIXTEN9.6/10View on Amazon
  3. 3antools SG86Best Goggle Fitantools SG869.6/10View on Amazon
  4. 4TICONN Ticonn-1025-OBest Bulk PackTICONN Ticonn-1025-O9.5/10View on Amazon
  5. 5TICONN Ticonn-1626Best Anti-FogTICONN Ticonn-16269.5/10View on Amazon

Welding throws sparks, spatter and bright arc light at your eyes, and the right glasses are the pair you will actually wear. The best safety glasses for welding balance a real safety standard with a lens suited to the job: IR filter shades for arc-adjacent work, clear ANSI-rated lenses for grinding and general shop use. These five run from a 12-pair bulk pack to a wraparound IR 5.0 goggle, and four of them state ANSI Z87.1.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Welding Pick LANON Les06: ANSI Z87.1 with IR 5.0 filter lens, adjustable wraparound frame, UV coating. Check price on Amazon
  • Most Certified Ergodyne Skullerz SIXTEN: ANSI/ISEA Z87.1-2020, CSA Z94.3, EN166 stated, side shields, anti-fog plus anti-scratch. Check price on Amazon
  • Best Goggle Fit antools SG86: Wrap-around IR 5.0 welding goggles with polyurethane gasket, stated 1.2 ounces. Check price on Amazon
  • Best Bulk Pack TICONN Ticonn-1025-O: Twelve ANSI Z87.1 pairs with UV400 protection and scratch-resistant lenses. Check price on Amazon
  • Best Anti-Fog TICONN Ticonn-1626: ANSI Z87.1 with anti-fog coating, adjustable arms, wraparound shape. Check price on Amazon

The machines

LANON Welding Safety Glasses, ANSI Z87.1

LANON Welding Safety Glasses, ANSI Z87.1

LANON Protection9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

ANSI Z87.1 welding safety glasses with an IR 5.0 filter lens, adjustable wraparound frame and UV protection coating.

Pros

  • ANSI Z87.1 stated with an IR Filter Shade 5.0 lens
  • Adjustable wraparound frame with soft TPR nose pads
  • UV protection coating and anti-scratch stated
  • Impact resistant stated with featherlight design

Cons

  • No concrete warranty term stated
  • No visible light transmission figure stated
  • Single pair only, no bulk option
Ergodyne Skullerz SIXTEN Safety Glasses with Side

Ergodyne Skullerz SIXTEN Safety Glasses with Side

Ergodyne9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Full-frame safety glasses with side shields, anti-fog plus anti-scratch, ANSI/ISEA Z87.1-2020 and CSA Z94.3 stated.

Pros

  • ANSI/ISEA Z87.1-2020, CSA Z94.3, EN166 and ISO 16321 stated
  • Integrated side shields with 91% visible light transmission stated
  • Anti-fog plus anti-scratch lens treatment
  • Microfiber cleaning bag included

Cons

  • Clear lens only, no IR filter option stated
  • Retainer strap sold separately
  • No concrete warranty term stated
  • One size, no stated adjustability
antools IR 5.0 Welding Glasses

antools IR 5.0 Welding Glasses

antools9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Wrap-around IR 5.0 welding goggles with polyurethane gasket, UV protection and a stated 1.2 ounces.

Pros

  • IR 5.0 welding lens with 5% visible light transmission stated
  • Wrap-around goggle with polyurethane gasket
  • UV protection and scratch resistant coating stated
  • 1.2 ounces, the lightest stated weight here

Cons

  • "Meet ANSI/ISEA, OSHA" states no numbered standard
  • Fixed temple arms, no adjustability stated
  • No concrete warranty term stated
  • Single pair only
TICONN Anti-Fog Safety Glasses for Men & Women

TICONN Anti-Fog Safety Glasses for Men & Women

TICONN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

ANSI Z87.1 safety glasses with anti-fog coating, adjustable arms and a wraparound shape at a stated 2.47 ounces.

Pros

  • ANSI Z87.1 stated with UV eye protection
  • Anti-fog plus scratch-resistant coating
  • Adjustable arms with wraparound shape
  • 2.47 ounces with rubber frame and temple tips

Cons

  • Clear lens only, no welding filter
  • No concrete warranty term stated
  • Single pair, no bulk option
  • Stated for construction and cycling, not welding
TICONN Clear Safety Glasses for Men & Women

TICONN Clear Safety Glasses for Men & Women

TICONN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Twelve ANSI Z87.1 safety glasses with UV400 protection and scratch-resistant lenses: the bulk pack for crews.

Pros

  • 12 pairs in one listing, the bulk value pick
  • ANSI Z87.1 stated with UV400 protection
  • Scratch-resistant lenses with impact resistance stated
  • Lightweight polycarbonate with silicone temple tips

Cons

  • Clear lens only, no welding filter
  • Rimless frame with no stated adjustability
  • No concrete warranty term stated
  • Stated for construction and cycling, not welding

Other welders and gear to compare

Spec sheet comparison

Safety glasses Standard Lens Features Pack
LANON Les06 ANSI Z87.1 IR 5.0 dark green Adjustable wraparound, TPR nose pads 1
Ergodyne Skullerz SIXTEN ANSI/ISEA Z87.1-2020, CSA Z94.3 Clear, 91% VLT Side shields, anti-fog, microfiber bag 1
antools SG86 ANSI/ISEA stated, no number IR 5.0 dark green, 5% VLT Wrap-around goggles, PU gasket 1
TICONN Ticonn-1626 ANSI Z87.1 Clear, UV protection Anti-fog, adjustable arms, wraparound 1
TICONN Ticonn-1025-O ANSI Z87.1 Clear, UV400 Rimless, silicone temple tips 12 pairs

20 October 2026

Best safety glasses for welding: what matters in welding safety glasses

Start with the standard. Four of the five state ANSI Z87.1: both TICONN pairs, the Ergodyne and the LANON. The Ergodyne goes further with stated ANSI/ISEA Z87.1-2020, CSA Z94.3, EN166 and ISO 16321 compliance, the deepest stated certification list here. The antools IR 5.0 glasses state “Meet ANSI/ISEA, OSHA” with no numbered standard: read that as the maker’s claim, not a rated mark, since the number is not stated.

Then match the lens to the work. The two IR 5.0 picks, the LANON and the antools, state dark green filter lenses for welding: the LANON names ANSI Z87.1 plus the IR 5.0 filter, and the antools states 5 percent visible light transmission. The clear picks are general shop eye protection: the Ergodyne states 91 percent visible light transmission and 99.9 percent UVA, UVB and UVC filtering, the TICONN clear pair states UV400 protection, and the TICONN anti-fog pair states UV eye protection. Do not treat clear glasses as arc protection: the listings state them for construction, cycling and general use, not for welding arcs.

Fit decides whether they stay on. The LANON states an adjustable wraparound frame with soft TPR nose pads, the TICONN anti-fog pair states adjustable arms and a wraparound shape at a stated 2.47 ounces, the antools states a wrap-around goggle with a polyurethane gasket, and the Ergodyne states a contoured nose bridge with soft temple pads plus integrated side shields. The Ergodyne is the only pick that includes a microfiber cleaning bag, and its retainer strap is sold separately. The TICONN clear pair is the bulk buy: 12 pairs in one listing, the value pick for a crew.

Before You Strike an Arc

  • Confirm the stated standard on arrival: look for the ANSI Z87.1 mark the four listings claim
  • Match the lens to the task: IR 5.0 filter lenses for welding-adjacent work, clear lenses for grinding and general shop use
  • Check the fit with your helmet or respirator before the first arc: wraparound shapes and adjustable arms are stated to help
  • Keep the lenses clean with a soft cloth, as the TICONN and LANON care instructions state, and avoid harsh chemicals
  • No listing states a concrete warranty term, so inspect on arrival: none of these carry a stated years-or-months warranty

FAQ for welders

What shade should welding safety glasses be?

The two welding picks here state an IR 5.0 filter lens in dark green, with the antools listing stating 5 percent visible light transmission. The LANON pairs ANSI Z87.1 with the IR 5.0 filter. Neither listing states a shade chart, so treat 5.0 as what these two list.

Are clear safety glasses enough for welding?

The listings state the clear picks for construction, cycling and general use, not for welding arcs. The IR 5.0 picks are the stated welding lenses here. For arc flash, the listings state no helmet rating: follow your helmet’s manual.

What does ANSI Z87.1 mean on safety glasses?

It is the stated impact safety standard on four of these five listings. The Ergodyne states the 2020 edition with the Z87+ mark plus CSA Z94.3 and EN166. The antools listing states “Meet ANSI/ISEA, OSHA” with no edition number stated.

Do any of these come with extras?

The Ergodyne includes a protective microfiber bag and its retainer strap is sold separately. The TICONN clear listing is a 12-pair pack. The other picks list one pair with no stated extras.

How do I clean safety glasses?

The listings state soft cloth cleaning: the TICONN clear says a soft dry cloth, the TICONN anti-fog says a soft cloth avoiding harsh chemicals and high heat, and the LANON says mild detergent with air drying.

Related: our best leather welding gloves, the best welding gloves for beginners, the best auto-darkening welding helmet and the best true color welding helmet.

Scoring, line by line

Each pair is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LANON Les06 9.6 32 21 20 8 0
Ergodyne Skullerz SIXTEN 9.6 29 22 19 9 0
antools SG86 9.6 30 20 20 5 0
TICONN Ticonn-1626 9.5 27 19 19 8 0
TICONN Ticonn-1025-O 9.5 23 18 22 8 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides

Welding Tables and Carts ·

Welding Helmet vs Safety Glasses (2026)

Welding helmet vs safety glasses: two Miller helmets against two NoCry ANSI glasses, compared by arc protection, lens and warranty.

Welding Safety Gear ·

Plasma Cutter Safety Glasses: What to Wear

Shade 5 glasses suit torch cutting and brazing, but one maker here states not to use them for plasma cutting, so check the maker's…