Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Plasma Cutter Safety Glasses: What to Wear

Shade 5 glasses suit torch cutting and brazing, but one maker here states not to use them for plasma cutting, so check the maker's stated use before you buy.

Plasma Cutter Safety Glasses: What to Wear
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1IR 5.0 Welding Glasses for DIYerIR 5.0 Welding Glasses for DIYerView on Amazon
  2. 2Welding Glasses Auto Darkening Welder Glasses with 2 SensorsWelding Glasses Auto Darkening Welder Glasses with 2 SensorsView on Amazon
  3. 3Welding Glasses Auto-darkeningWelding Glasses Auto-darkeningView on Amazon
  4. 4Welding Glasses IR 5.0 ANSI Z87.1 Plasma Cutting GogglesWelding Glasses IR 5.0 ANSI Z87.1 Plasma Cutting GogglesView on Amazon

The plasma arc throws bright light, sparks and hot metal at your face, and plasma cutter safety glasses are the glasses you wear to stand in front of it. The listings here are dark-tinted glasses made for torch cutting and brazing, and a maker here states plainly not to use its glasses for plasma cutting. This guide explains what the shade covers, what the listings state about fit and standards, and how to pick a pair whose maker lists plasma cutting as a use.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

What plasma cutter safety glasses need to do

Plasma cutting throws bright light from the arc, infrared and ultraviolet radiation, and sparks and hot metal at your eyes. Glasses for this work need a dark lens, side coverage and impact protection. The NoCry listing states a shade 5 lens, ANSI Z87.1+ impact protection and integrated side shields. The LADYPONYCSC listing states IR 5.0 shade 5 and ANSI Z87.1 with a wrap-around design. The Lincoln Electric listing states an IR shade 5 lens with impact protection, and names no standard and no side shields. They are glasses, not a helmet, so they suit short cuts and quick jobs where a helmet gets in the way. For long cuts or heavy work, a welding helmet with a shade the helmet maker lists for plasma cutting is the safer call.

Shade 5 and what it covers

A shade 5 lens is a dark green lens for torch cutting, brazing and heating. The NoCry listing states a shade 5 lens with 2% VLT and a W5 filter, plus UV400 protection. VLT is the share of visible light that passes through the lens, so 2% VLT means the lens lets very little visible light through. The LADYPONYCSC listing states IR 5.0 shade 5 protection with dark green polycarbonate lenses that block UV and IR radiation from gas welding, brazing and torch cutting. The Lincoln Electric listing states an IR shade 5 lens for cutting and brazing protection. The listings agree on the shade and the work it suits: torch cutting and brazing. Plasma cutting is where they part ways: the NoCry listing states not to use its glasses for plasma cutting, while the LADYPONYCSC listing names plasma cutting among its uses. Follow the maker of the pair you buy, and when a maker says no, take that as the answer.

Side by side

NoCry shade 5 LADYPONYCSC IR 5.0 Lincoln Electric Starlite
Shade 5 IR 5.0 5
ANSI standard ANSI Z87.1+ ANSI Z87.1 Not stated
Weight Not stated 1.1 oz 0.05 pounds
Fits over prescription glasses Yes Yes Not stated
Warranty Lifetime 30-day satisfaction contact Against manufacturing defects
Lens Dark green, 2% VLT Dark green polycarbonate IR shade 5
Side shields Yes Wrap-around Not stated

The table repeats the figures the listings state. The NoCry pair states a lifetime warranty. The Lincoln Electric pair lists 0.05 pounds, and the LADYPONYCSC pair lists 1.1 oz. The NoCry and LADYPONYCSC listings state the pair fits over prescription glasses, and the Lincoln Electric listing does not state it.

Fit over prescription glasses

The NoCry pair is made to fit over prescription glasses, with extendable temple arms and soft TPR tips. The LADYPONYCSC pair has a wrap-around design that fits over most prescription glasses, with a hard-coated lens and a zippered carrying case with a carabiner clip. The Lincoln Electric pair lists a snug fit to minimize slippage and a large viewing area. If you wear prescription glasses, check the fit the maker states before you buy: the NoCry and LADYPONYCSC listings state the pair fits over glasses, and the Lincoln Electric listing does not state it.

Weight and wear

Glasses you wear all afternoon need to sit light on your face. The Lincoln Electric pair lists 0.05 pounds and the maker describes it as weighing less than one ounce. The LADYPONYCSC pair lists 1.1 oz and the maker calls it a lightweight alternative to a helmet. The NoCry pair states no weight. The NoCry and Lincoln Electric listings state a one-size fit, and the LADYPONYCSC listing states a standard size.

What the listings warn against

The NoCry listing states not to use its glasses for electric arc welding, plasma cutting or laser operations. That warning matters because the listing also names cutting and brazing as the use. The LADYPONYCSC listing names plasma cutting, torch work and gas welding among its uses, and also names mowing, yard work and grinding as uses beyond the workshop. The Lincoln Electric listing names cutting and brazing protection. Read the use the maker states for the pair you buy, and do not use a pair for a process its maker rules out.

FAQ for welders

Can I use shade 5 glasses for plasma cutting?

It depends on the maker. The NoCry listing states not to use its shade 5 glasses for plasma cutting, while the LADYPONYCSC listing names plasma cutting among its uses. Follow the maker of the pair you buy, and when a maker says no, use a helmet or a lens the maker rates for plasma cutting.

What does 2% VLT mean?

VLT is the share of visible light that passes through the lens. The NoCry listing states 2% VLT with a W5 filter, so the lens lets very little visible light through. The dark green tint cuts glare from the flame.

Do these glasses fit over prescription glasses?

The NoCry pair is made to fit over prescription glasses, and the LADYPONYCSC pair has a wrap-around design that fits over most prescription glasses. The Lincoln Electric listing does not state that it fits over glasses. Check the fit the maker states before you buy.

What is ANSI Z87.1?

ANSI Z87.1 is the impact standard the NoCry and LADYPONYCSC listings cite for eye protection. The NoCry pair is rated ANSI Z87.1+ with integrated side shields, and the LADYPONYCSC pair meets ANSI Z87.1 impact standards. The Lincoln Electric listing states impact protection without naming a standard.

How heavy are plasma cutter safety glasses?

The Lincoln Electric pair lists 0.05 pounds, and the maker describes it as weighing less than one ounce. The LADYPONYCSC pair lists 1.1 oz. The NoCry pair states no weight.

Related: welding safety gear, best welding goggles for plasma cutting, best plasma cutter, welding helmet shade chart, and safety goggles for welding.

More buying guides

Welding Safety Gear ·

Glass Lens Safety Glasses: Pros and Cons

Glass lens safety glasses stay clear and resist scratches, but they weigh more and can crack on a hard hit. How glass compares with…